[Wed Aug 22 10:19:21 2012] Detection parameters:
  Position = (245.2, 273.2) = 0 56 25.42 -1 15 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.7 +/- 16.5
  Background counts = 59.0
  Rate = 0.008 +/- 0.001

[Wed Aug 22 10:19:22 2012] Off-axis axis estimate = 4.28'
[Wed Aug 22 10:40:07 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 10:40:07 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Wed Aug 22 10:40:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Wed Aug 22 10:40:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.57"
[Wed Aug 22 10:49:31 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 22 10:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 10:49:31 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 22 10:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_src1.csv
[Wed Aug 22 10:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 10:49:32 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 22 10:49:32 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 22 10:49:32 2012] Fit fullrun_mos1_xmm0505211001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 22 11:03:28 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.456208 pixels away
[Wed Aug 22 11:03:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 11:03:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 11:03:28 2012] Assessing source extent using major
[Wed Aug 22 11:03:28 2012] Source does appear to be extended
[Wed Aug 22 11:03:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 11:14:52 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 11:14:52 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Wed Aug 22 11:14:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Wed Aug 22 11:14:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.57"
[Wed Aug 22 11:23:08 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 22 11:23:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 11:23:08 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 22 11:23:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_src1.csv
[Wed Aug 22 11:23:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 11:23:08 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 22 11:23:08 2012] fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 22 11:23:08 2012] Fit fullrun_mos1_xmm0505211001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 22 11:35:52 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.456208 pixels away
[Wed Aug 22 11:35:52 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 11:35:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 11:35:52 2012] Assessing source extent using major
[Wed Aug 22 11:35:52 2012] Source does appear to be extended
[Wed Aug 22 11:35:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 11:43:50 2012] XMMSAS src. selection expression = ellipse(21279.891968, 23717.458435, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 11:43:50 2012] Writing source region out to fullrun_mos1_xmm0505211001_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 22 11:43:50 2012] Extracting stamp from image fullrun_mos1_xmm0505211001_pi300-10000_cl_sm2.00.img.gz, (208, 236) - (283, 311)
[Wed Aug 22 11:43:50 2012] XMMSAS bgd. selection expression = annulus(21279.891968, 23717.458435, 1087.500000, 2175.000000, X, Y)
[Wed Aug 22 11:43:50 2012] Writing fullrun_mos1_xmm0505211001_pi300-10000_pass1_cl_src4.gif
[Wed Aug 22 11:43:53 2012] Mean detx,y = (2350.21, 2101.43) 
[Wed Aug 22 11:43:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 11:44:09 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 11:44:09 2012] Setting source spectrum file to fullrun_mos1_xmm0505211001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 11:44:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505211001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 22 11:45:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 11:45:12 2012] rmf not generated due to insufficient counts
[Wed Aug 22 11:53:00 2012] Updating aperture counts using extracted products
[Wed Aug 22 11:53:00 2012] Error reading totcts from fullrun_mos1_xmm0505211001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 22 11:53:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 11:53:00 2012] Using photon index=1.80, rate=0.00817, arf fullrun_mos1_xmm0505211001_pi300-10000_pass1_cl_src4.arf
[Wed Aug 22 11:53:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 11:53:00 2012] Updating source flux to 8.2e-14
[Wed Aug 22 11:53:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 22 11:53:02 2012] xmm0505211001/analysis//spectral/fullrun_mos1_xmm0505211001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete