[Wed May 8 00:53:55 2013] Detection parameters: Position = (422.7, 442.5) = 23 37 54.73 27 11 8.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 119.8 +/- 21.0 Background counts = 157.6 Rate = 0.01 +/- 0.002 [Wed May 8 00:53:55 2013] Off-axis axis estimate = 13.80' [Wed May 8 00:56:42 2013] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting [Wed May 8 00:56:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 00:56:42 2013] Initial guess for spatial extent in simple fitting = 13.33" [Wed May 8 00:56:42 2013] source mask rpix=3.1, npix_max = 50, mask sum = 43, frac = 0.847 [Wed May 8 00:56:42 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.33" [Wed May 8 01:02:09 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_src4.ximg exists [Wed May 8 01:02:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_src4.csv [Wed May 8 01:02:09 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_src4_1.ximg exists [Wed May 8 01:02:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_src4.csv [Wed May 8 01:02:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:02:09 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Wed May 8 01:02:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.csv [Wed May 8 01:02:09 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Wed May 8 01:02:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.csv [Wed May 8 01:02:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:21:23 2013] Spatial fit model total counts = 1291.920000, observed total counts = 1014.000000 [Wed May 8 01:21:23 2013] Poor agreement between spatial fit and data for source 4 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 01:21:23 2013] Vigneting correction estimate = 1.000000 [Wed May 8 01:21:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 01:21:23 2013] Assessing source extent using major [Wed May 8 01:21:23 2013] Source does appear to be extended [Wed May 8 01:21:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 01:21:30 2013] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting [Wed May 8 01:21:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 01:21:30 2013] Initial guess for spatial extent in simple fitting = 13.33" [Wed May 8 01:21:30 2013] source mask rpix=3.1, npix_max = 50, mask sum = 43, frac = 0.847 [Wed May 8 01:21:30 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 13.33" [Wed May 8 01:27:00 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_src4.ximg exists [Wed May 8 01:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_src4.csv [Wed May 8 01:27:00 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_src4_1.ximg exists [Wed May 8 01:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_src4.csv [Wed May 8 01:27:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:27:00 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Wed May 8 01:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.csv [Wed May 8 01:27:00 2013] fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Wed May 8 01:27:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.csv [Wed May 8 01:27:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:46:03 2013] Spatial fit model total counts = 1291.920000, observed total counts = 1014.000000 [Wed May 8 01:46:03 2013] Poor agreement between spatial fit and data for source 4 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 01:46:03 2013] Vigneting correction estimate = 1.000000 [Wed May 8 01:46:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 01:46:03 2013] Assessing source extent using major [Wed May 8 01:46:03 2013] Source does appear to be extended [Wed May 8 01:46:03 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 01:46:10 2013] XMMSAS src. selection expression = ellipse(36729.738434, 38449.108856, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 01:46:10 2013] Writing source region out to fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4_src.reg [Wed May 8 01:46:10 2013] Extracting stamp from image fullrun_pn_xmm0505210801_pi300-10000_cl_sm2.00.img.gz, (385, 405) - (460, 480) [Wed May 8 01:46:10 2013] XMMSAS bgd. selection expression = annulus(36729.738434, 38449.108856, 1087.500000, 2175.000000, X, Y) [Wed May 8 01:46:10 2013] Writing fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4.gif [Wed May 8 01:48:28 2013] Mean detx,y = (3695.70, -14429.74) [Wed May 8 01:48:30 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 01:48:57 2013] Binned source spectrum to 10 counts/bin [Wed May 8 01:48:57 2013] Setting source spectrum file to fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Wed May 8 01:48:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4_bgd.pi.gz [Wed May 8 01:55:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 01:55:59 2013] rmf not generated due to insufficient counts [Wed May 8 02:11:10 2013] Updating aperture counts using extracted products [Wed May 8 02:11:10 2013] Total counts from fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 555.00 [Wed May 8 02:11:10 2013] Total counts from fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4_bgd.pi.gz = 4215.00 [Wed May 8 02:11:10 2013] Got source and background scale factors 1076055.000000, 10279259.000000 [Wed May 8 02:11:10 2013] User source parameters: Position = (422.7, 442.5) = 23 37 54.73 27 11 8.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 113.8 +/- 24.6 Background aperture counts = 441.2 Rate = 0.02 +/- 0.004 [Wed May 8 02:11:10 2013] Updating counts from extracted products [Wed May 8 02:11:10 2013] Set source signif. to 113.76/21.01 = 5.42 [Wed May 8 02:11:10 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 02:11:10 2013] Using photon index=1.80, rate=0.0163, arf fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4.arf [Wed May 8 02:11:10 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 02:11:10 2013] Updating source flux to 2.2e-13 [Wed May 8 02:11:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 02:11:19 2013] xmm0505210801/analysis//spectral/fullrun_pn_xmm0505210801_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete