[Wed May  8 00:54:29 2013] Detection parameters:
  Position = (221.7, 295.5) = 23 39 0.24 27 0 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.4 +/- 12.1
  Background counts = 25.5
  Rate = 0.008 +/- 0.001

[Wed May  8 00:54:29 2013] Off-axis axis estimate = 5.57'
[Wed May  8 01:10:27 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Wed May  8 01:10:27 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Wed May  8 01:10:27 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Wed May  8 01:10:27 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.21"
[Wed May  8 01:21:21 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_src4.ximg exists
[Wed May  8 01:21:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_src4.csv
[Wed May  8 01:21:21 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May  8 01:21:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_src4.csv
[Wed May  8 01:21:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:21:21 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May  8 01:21:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May  8 01:21:21 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May  8 01:21:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May  8 01:21:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:21:25 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.100236 pixels away
[Wed May  8 01:21:25 2013] Vigneting correction estimate = 1.000000
[Wed May  8 01:21:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 01:21:25 2013] Assessing source extent using major
[Wed May  8 01:21:25 2013] Source does appear to be extended
[Wed May  8 01:21:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 01:34:19 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Wed May  8 01:34:19 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Wed May  8 01:34:19 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Wed May  8 01:34:19 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.21"
[Wed May  8 01:46:00 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_src4.ximg exists
[Wed May  8 01:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_src4.csv
[Wed May  8 01:46:00 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May  8 01:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_src4.csv
[Wed May  8 01:46:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:46:00 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May  8 01:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May  8 01:46:00 2013] fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May  8 01:46:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May  8 01:46:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 01:46:06 2013] Spatial fit model total counts = 298.188000, observed total counts = 267.000000
[Wed May  8 01:46:06 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 01:46:06 2013] Vigneting correction estimate = 1.000000
[Wed May  8 01:46:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 01:46:06 2013] Assessing source extent using major
[Wed May  8 01:46:06 2013] Source does appear to be extended
[Wed May  8 01:46:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 02:02:57 2013] XMMSAS src. selection expression = ellipse(19238.625793, 25663.374542, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  8 02:02:57 2013] Writing source region out to fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5_src.reg
[Wed May  8 02:02:57 2013] Extracting stamp from image fullrun_mos2_xmm0505210801_pi300-10000_cl_sm2.00.img.gz, (184, 258) - (259, 333)
[Wed May  8 02:02:57 2013] XMMSAS bgd. selection expression = annulus(19238.625793, 25663.374542, 1087.500000, 2175.000000, X, Y)
[Wed May  8 02:02:57 2013] Writing fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5.gif
[Wed May  8 02:03:31 2013] Mean detx,y = (7216.77, -4692.73) 
[Wed May  8 02:03:32 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 02:03:47 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 02:03:47 2013] Setting source spectrum file to fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May  8 02:03:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May  8 02:10:08 2013] Not generating rmf since there are only 70 counts
[Wed May  8 02:10:08 2013] rmf not generated due to insufficient counts
[Wed May  8 02:11:12 2013] Updating aperture counts using extracted products
[Wed May  8 02:11:12 2013] Total counts from fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 193.00
[Wed May  8 02:11:13 2013] Total counts from fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5_bgd.pi.gz = 1395.00
[Wed May  8 02:11:13 2013] Got source and background scale factors 1124978.000000, 10320197.000000
[Wed May  8 02:11:13 2013] User source parameters:
  Position = (221.7, 295.5) = 23 39 0.24 27 0 29.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.9 +/- 14.9
  Background aperture counts = 152.1
  Rate = 0.003 +/- 0.001

[Wed May  8 02:11:13 2013] Updating counts from extracted products
[Wed May  8 02:11:13 2013] Set source signif. to 40.93/12.33 = 3.32
[Wed May  8 02:11:14 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 02:11:14 2013] Using photon index=1.80, rate=0.00277, arf fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5.arf
[Wed May  8 02:11:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 02:11:14 2013] Updating source flux to 4.6e-14
[Wed May  8 02:11:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  8 02:11:18 2013] xmm0505210801/analysis//spectral/fullrun_mos2_xmm0505210801_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete