[Wed May 8 00:54:13 2013] Detection parameters: Position = (465.1, 401.3) = 23 37 40.94 27 8 7.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 68.1 +/- 12.3 Background counts = 27.3 Rate = 0.005 +/- 0.0008 [Wed May 8 00:54:13 2013] Off-axis axis estimate = 14.20' [Wed May 8 01:02:09 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting [Wed May 8 01:02:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 01:02:09 2013] Initial guess for spatial extent in simple fitting = 13.53" [Wed May 8 01:02:09 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940 [Wed May 8 01:02:09 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.53" [Wed May 8 01:10:27 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_src5.ximg exists [Wed May 8 01:10:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_src5.csv [Wed May 8 01:10:27 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_src5_1.ximg exists [Wed May 8 01:10:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_src5.csv [Wed May 8 01:10:27 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:10:27 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed May 8 01:10:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 8 01:10:27 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 8 01:10:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 8 01:10:27 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505210801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:21:24 2013] Spatial fit model total counts = 411.641000, observed total counts = 331.000000 [Wed May 8 01:21:24 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 01:21:24 2013] Vigneting correction estimate = 1.000000 [Wed May 8 01:21:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 01:21:24 2013] Assessing source extent using major [Wed May 8 01:21:24 2013] Source does appear to be extended [Wed May 8 01:21:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 01:27:00 2013] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting [Wed May 8 01:27:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 01:27:00 2013] Initial guess for spatial extent in simple fitting = 13.53" [Wed May 8 01:27:00 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940 [Wed May 8 01:27:00 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.53" [Wed May 8 01:34:19 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_src5.ximg exists [Wed May 8 01:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_src5.csv [Wed May 8 01:34:19 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_src5_1.ximg exists [Wed May 8 01:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_src5.csv [Wed May 8 01:34:19 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:34:19 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed May 8 01:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 8 01:34:19 2013] fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed May 8 01:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 8 01:34:19 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505210801_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:46:04 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 18.205815 pixels away [Wed May 8 01:46:04 2013] Vigneting correction estimate = 1.000000 [Wed May 8 01:46:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 01:46:04 2013] Assessing source extent using major [Wed May 8 01:46:04 2013] Source does appear to be extended [Wed May 8 01:46:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 01:56:21 2013] XMMSAS src. selection expression = ellipse(40416.915680, 34860.634979, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 01:56:21 2013] Writing source region out to fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2_src.reg [Wed May 8 01:56:21 2013] Extracting stamp from image fullrun_mos1_xmm0505210801_pi300-10000_cl_sm2.00.img.gz, (428, 364) - (503, 439) [Wed May 8 01:56:21 2013] XMMSAS bgd. selection expression = annulus(40416.915680, 34860.634979, 1087.500000, 2175.000000, X, Y) [Wed May 8 01:56:21 2013] Writing fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2.gif [Wed May 8 01:57:46 2013] Mean detx,y = (12682.59, 8037.89) [Wed May 8 01:57:47 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 01:58:12 2013] Binned source spectrum to 10 counts/bin [Wed May 8 01:58:13 2013] Setting source spectrum file to fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Wed May 8 01:58:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2_bgd.pi.gz [Wed May 8 02:02:45 2013] Not generating rmf since there are only 68 counts [Wed May 8 02:02:45 2013] rmf not generated due to insufficient counts [Wed May 8 02:11:11 2013] Updating aperture counts using extracted products [Wed May 8 02:11:11 2013] Total counts from fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 199.00 [Wed May 8 02:11:11 2013] Total counts from fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2_bgd.pi.gz = 801.00 [Wed May 8 02:11:11 2013] Got source and background scale factors 1104952.000000, 5932544.000000 [Wed May 8 02:11:11 2013] User source parameters: Position = (465.1, 401.3) = 23 37 40.94 27 8 7.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 49.8 +/- 15.1 Background aperture counts = 149.2 Rate = 0.003 +/- 0.001 [Wed May 8 02:11:11 2013] Updating counts from extracted products [Wed May 8 02:11:11 2013] Set source signif. to 49.81/12.21 = 4.08 [Wed May 8 02:11:12 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 02:11:12 2013] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2.arf [Wed May 8 02:11:12 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 02:11:12 2013] Updating source flux to 8.3e-14 [Wed May 8 02:11:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 02:11:17 2013] xmm0505210801/analysis//spectral/fullrun_mos1_xmm0505210801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete