[Sat Aug 11 17:14:07 2012] Detection parameters:
  Position = (299.5, 314.1) = 16 2 17.99 15 57 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.0 +/- 25.0
  Background counts = 122.5
  Rate = 0.02 +/- 0.003

[Sat Aug 11 17:14:09 2012] Off-axis axis estimate = 1.14'
[Sat Aug 11 17:18:27 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 17:18:27 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Sat Aug 11 17:18:27 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.124
[Sat Aug 11 17:18:27 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.00"
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src27.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src27.csv
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src27.csv
[Sat Aug 11 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Aug 11 20:40:51 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Aug 12 01:57:19 2012] Spatial fit model total counts = 2299.190000, observed total counts = 2299.000000
[Sun Aug 12 01:57:19 2012] Offset between fit and detection position for source 29 = 3.830159 pixels
[Sun Aug 12 01:57:19 2012] 2308.759000 total counts/ 2135.590000 bgd. counts: snr = 3.747237
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 3.830159 pixels
  Position = (301.6, 317.3) = 16 2 17.34 15 58 9.8
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 173.2 +/- 48.0
  Background counts = 2135.6
  Rate = 0.02 +/- 0.005
[Sun Aug 12 01:57:20 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:20 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 01:57:20 2012] Source does appear to be extended
[Sun Aug 12 01:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:20 2012] Source is confused with source 17
[Sun Aug 12 01:57:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 01:57:56 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Sun Aug 12 01:57:56 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.886
[Sun Aug 12 01:57:56 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 14.00"
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src23.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src23.csv
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src23.csv
[Sun Aug 12 04:51:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 04:51:24 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Aug 12 04:51:24 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Aug 12 04:51:24 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Aug 12 08:02:27 2012] Warning, spatial fit 23 centroid is now closest to src. 33
[Sun Aug 12 08:02:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 08:02:27 2012] Source does appear to be extended
[Sun Aug 12 08:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 08:02:50 2012] XMMSAS src. selection expression = ellipse(26194.214000, 27557.028000, 839.832024, 839.832024, 0.000000, X, Y)
[Sun Aug 12 08:02:50 2012] Writing source region out to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src29_src.reg
[Sun Aug 12 08:02:50 2012] Extracting stamp from image fullrun_pn_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (253, 269) - (350, 366)
[Sun Aug 12 08:02:50 2012] XMMSAS bgd. selection expression = annulus(26194.214000, 27557.028000, 1399.720040, 2799.440081, X, Y) && !ellipse(27879.378815, 30198.440704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.170044, 29224.116638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.381561, 29010.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.998627, 29075.565094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.005524, 29381.666077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.829407, 28835.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.968781, 28710.384399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.840668, 28392.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26192.545776, 28298.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28922.853336, 28327.838320, 827.296024, 827.296024, 0.000000, X, Y) && !ellipse(28012.691000, 27947.789000, 1281.152037, 572.399216, 353.770000, X, Y) && !ellipse(29632.030029, 27308.951080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28986.101227, 27276.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.544000, 27587.478400, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(27532.828461, 27263.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.602417, 27006.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.714691, 26757.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25170.792267, 26830.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.976318, 26492.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.304840, 25781.045441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26883.817169, 25803.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25505.519775, 26320.972198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.236877, 25962.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.315094, 25177.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25475.561600, 25362.024400, 1064.544031, 1064.544031, 0.000000, X, Y) && !ellipse(27342.076200, 25311.858000, 541.903216, 541.903216, 0.000000, X, Y) && !ellipse(25377.629669, 24752.309204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28376.416000, 24332.428000, 1176.144034, 1176.144034, 0.000000, X, Y) && !ellipse(27473.812469, 24396.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.143800, 23914.780000, 1200.664035, 1200.664035, 0.000000, X, Y) && !ellipse(26337.290009, 24094.127441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.432892, 24118.463440, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 08:02:50 2012] Writing fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src29.gif
[Sun Aug 12 08:15:33 2012] Mean detx,y = (-165.34, 59.12) 
[Sun Aug 12 08:15:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 08:16:03 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 08:16:03 2012] Setting source spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Aug 12 08:16:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Aug 12 11:09:58 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:09:58 2012] Error reading totcts from fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Aug 12 11:10:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:00 2012] Using photon index=1.80, rate=0.0175, arf fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src29.arf
[Sun Aug 12 11:10:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:01 2012] Updating source flux to 4e-14
[Sun Aug 12 11:10:39 2012] Flag c found in src. 29 procflags, skipping spectral fitting