[Sat Aug 11 17:14:07 2012] Detection parameters:
  Position = (284.0, 311.0) = 16 2 22.68 15 57 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.1 +/- 18.4
  Background counts = 117.2
  Rate = 0.01 +/- 0.002

[Sat Aug 11 17:14:09 2012] Off-axis axis estimate = 1.39'
[Sat Aug 11 17:18:27 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 17:18:27 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sat Aug 11 17:18:27 2012] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.766
[Sat Aug 11 17:18:27 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.12"
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src26.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src26.csv
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src26.csv
[Sat Aug 11 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Aug 11 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Aug 11 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Aug 11 20:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:19 2012] Spatial fit model total counts = 1716.400000, observed total counts = 1406.000000
[Sun Aug 12 01:57:19 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 01:57:20 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:20 2012] Assessing source extent using major
[Sun Aug 12 01:57:20 2012] Source does appear to be extended
[Sun Aug 12 01:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:20 2012] Source is confused with source 31
[Sun Aug 12 01:57:56 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 01:57:56 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sun Aug 12 01:57:56 2012] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.766
[Sun Aug 12 01:57:56 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.12"
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src22.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src22.csv
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src22.csv
[Sun Aug 12 04:51:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 04:51:24 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Aug 12 04:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 12 04:51:24 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Aug 12 04:51:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 12 04:51:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 08:02:27 2012] Source 28 is offset by -5.032225 and -5.406546 pixels which is larger than
2 X fitted extent = 0.885747 x 0.842782, not incorporating fit results
[Sun Aug 12 08:02:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:27 2012] Assessing source extent using major
[Sun Aug 12 08:02:27 2012] Source does appear to be extended
[Sun Aug 12 08:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 08:02:50 2012] XMMSAS src. selection expression = ellipse(24655.602417, 27006.402527, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 08:02:50 2012] Writing source region out to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src28_src.reg
[Sun Aug 12 08:02:50 2012] Extracting stamp from image fullrun_pn_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (246, 273) - (321, 348)
[Sun Aug 12 08:02:50 2012] XMMSAS bgd. selection expression = annulus(24655.602417, 27006.402527, 1087.500000, 2175.000000, X, Y) && !ellipse(27663.381561, 29010.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.998627, 29075.565094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.005524, 29381.666077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.968781, 28710.384399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.840668, 28392.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26192.545776, 28298.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.691000, 27947.789000, 1281.152037, 572.399216, 353.770000, X, Y) && !ellipse(26395.544000, 27587.478400, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(27532.828461, 27263.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.214000, 27557.028000, 1119.776032, 1119.776032, 0.000000, X, Y) && !ellipse(25170.792267, 26830.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.976318, 26492.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.304840, 25781.045441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26883.817169, 25803.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25505.519775, 26320.972198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.236877, 25962.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25475.561600, 25362.024400, 1064.544031, 1064.544031, 0.000000, X, Y) && !ellipse(27342.076200, 25311.858000, 541.903216, 541.903216, 0.000000, X, Y) && !ellipse(25377.629669, 24752.309204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27473.812469, 24396.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.143800, 23914.780000, 1200.664035, 1200.664035, 0.000000, X, Y) && !ellipse(26337.290009, 24094.127441, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 08:02:50 2012] Writing fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src28.gif
[Sun Aug 12 08:14:50 2012] Mean detx,y = (-1697.18, 6.72) 
[Sun Aug 12 08:14:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 08:15:22 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 08:15:23 2012] Setting source spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Aug 12 08:15:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Aug 12 09:48:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 09:48:39 2012] rmf not generated due to insufficient counts
[Sun Aug 12 11:09:58 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:09:58 2012] Error reading totcts from fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Aug 12 11:10:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:00 2012] Using photon index=1.80, rate=0.0132, arf fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src28.arf
[Sun Aug 12 11:10:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:00 2012] Updating source flux to 4.4e-14
[Sun Aug 12 11:10:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting