[Sat Aug 11 17:14:07 2012] Detection parameters:
  Position = (307.8, 317.1) = 16 2 15.48 15 58 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.8 +/- 26.8
  Background counts = 122.6
  Rate = 0.03 +/- 0.003

[Sat Aug 11 17:14:09 2012] Off-axis axis estimate = 1.51'
[Sat Aug 11 17:18:27 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 17:18:27 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sat Aug 11 17:18:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Sat Aug 11 17:18:27 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.18"
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src23.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src23.csv
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src23.csv
[Sat Aug 11 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Aug 11 20:40:50 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Aug 12 01:57:19 2012] Source 25 is offset by 0.061738 and -2.099274 pixels which is larger than
2 X fitted extent = 0.853802 x 0.853802, not incorporating fit results
[Sun Aug 12 01:57:19 2012] Spatial fit model total counts = 2506.660000, observed total counts = 2505.000000
[Sun Aug 12 01:57:19 2012] Offset between fit and detection position for source 25 = 2.713947 pixels
[Sun Aug 12 01:57:19 2012] 2482.840000 total counts/ 2274.630000 bgd. counts: snr = 4.365623
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.713947 pixels
  Position = (305.6, 318.6) = 16 2 16.15 15 58 15.5
  Extent = 14.4 (7.8-28.7)", rotation angle = 0
  Source counts = 208.2 +/- 49.8
  Background counts = 2274.6
  Rate = 0.02 +/- 0.005
[Sun Aug 12 01:57:20 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:20 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 01:57:20 2012] Source does appear to be extended
[Sun Aug 12 01:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:20 2012] Source is confused with source 17
[Sun Aug 12 01:57:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 01:57:56 2012] Initial guess for spatial extent in simple fitting = 14.37"
[Sun Aug 12 01:57:56 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.847
[Sun Aug 12 01:57:56 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 14.37"
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src19.ximg exists
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Aug 12 04:51:21 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src19 appears to have run properly
[Sun Aug 12 04:51:23 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Aug 12 04:51:24 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Aug 12 04:51:24 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Aug 12 08:02:27 2012] Spatial fit model total counts = 3789.330000, observed total counts = 3777.000000
[Sun Aug 12 08:02:27 2012] Offset between fit and detection position for source 25 = 1.919412 pixels
[Sun Aug 12 08:02:27 2012] 3772.601000 total counts/ 3347.780000 bgd. counts: snr = 7.342222
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.919412 pixels
  Position = (304.0, 317.7) = 16 2 16.65 15 58 11.3
  Extent = 21.7 (9.5-28.7)", rotation angle = 0
  Source counts = 424.8 +/- 61.4
  Background counts = 3347.8
  Rate = 0.04 +/- 0.006
[Sun Aug 12 08:02:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 08:02:27 2012] Source does appear to be extended
[Sun Aug 12 08:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 08:02:50 2012] XMMSAS src. selection expression = ellipse(26395.544000, 27587.478400, 1299.270037, 1299.270037, 0.000000, X, Y)
[Sun Aug 12 08:02:50 2012] Writing source region out to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src25_src.reg
[Sun Aug 12 08:02:50 2012] Extracting stamp from image fullrun_pn_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (229, 243) - (379, 392)
[Sun Aug 12 08:02:50 2012] XMMSAS bgd. selection expression = annulus(26395.544000, 27587.478400, 2165.450062, 4330.900125, X, Y) && !ellipse(27879.378815, 30198.440704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.170044, 29224.116638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.381561, 29010.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.998627, 29075.565094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.005524, 29381.666077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.829407, 28835.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.968781, 28710.384399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.840668, 28392.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26192.545776, 28298.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28922.853336, 28327.838320, 827.296024, 827.296024, 0.000000, X, Y) && !ellipse(28012.691000, 27947.789000, 1281.152037, 572.399216, 353.770000, X, Y) && !ellipse(29632.030029, 27308.951080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28986.101227, 27276.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.828461, 27263.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.602417, 27006.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.214000, 27557.028000, 1119.776032, 1119.776032, 0.000000, X, Y) && !ellipse(28742.714691, 26757.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25170.792267, 26830.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.976318, 26492.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.304840, 25781.045441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26883.817169, 25803.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25505.519775, 26320.972198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.236877, 25962.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.315094, 25177.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25475.561600, 25362.024400, 1064.544031, 1064.544031, 0.000000, X, Y) && !ellipse(27342.076200, 25311.858000, 541.903216, 541.903216, 0.000000, X, Y) && !ellipse(25377.629669, 24752.309204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28376.416000, 24332.428000, 1176.144034, 1176.144034, 0.000000, X, Y) && !ellipse(27473.812469, 24396.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.143800, 23914.780000, 1200.664035, 1200.664035, 0.000000, X, Y) && !ellipse(26337.290009, 24094.127441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.432892, 24118.463440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27706.947200, 23317.688000, 1015.944029, 1015.944029, 0.000000, X, Y)
[Sun Aug 12 08:02:50 2012] Writing fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src25.gif
[Sun Aug 12 08:13:24 2012] Mean detx,y = (38.51, 170.85) 
[Sun Aug 12 08:13:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 08:14:15 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 08:14:15 2012] Setting source spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Aug 12 08:14:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Aug 12 11:09:58 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:09:58 2012] Error reading totcts from fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Aug 12 11:10:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:00 2012] Using photon index=1.80, rate=0.0429, arf fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src25.arf
[Sun Aug 12 11:10:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:00 2012] Updating source flux to 9.4e-14
[Sun Aug 12 11:10:39 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Sun Aug 12 11:10:39 2012] Flag c found in src. 25 procflags, skipping spectral fitting