[Sat Aug 11 17:14:07 2012] Detection parameters:
  Position = (318.0, 321.0) = 16 2 12.41 15 58 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.5 +/- 26.0
  Background counts = 119.0
  Rate = 0.03 +/- 0.003

[Sat Aug 11 17:14:09 2012] Off-axis axis estimate = 2.16'
[Sat Aug 11 17:18:27 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 17:18:27 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sat Aug 11 17:18:27 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.807
[Sat Aug 11 17:18:27 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.51"
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src19.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src19.csv
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src19.csv
[Sat Aug 11 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Aug 11 20:40:50 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Aug 12 01:57:19 2012] Spatial fit model total counts = 2146.500000, observed total counts = 2148.000000
[Sun Aug 12 01:57:19 2012] Offset between fit and detection position for source 21 = 3.159569 pixels
[Sun Aug 12 01:57:19 2012] Warning, changing simple spatial fit ID from 19 to 16
[Sun Aug 12 01:57:19 2012] 2115.235000 total counts/ 1885.400000 bgd. counts: snr = 5.293153
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 3.159569 pixels
  Position = (321.1, 321.1) = 16 2 11.46 15 58 26.5
  Extent = 15.4 (15.4-30.9)", rotation angle = 0
  Source counts = 229.8 +/- 46.0
  Background counts = 1885.4
  Rate = 0.02 +/- 0.005
[Sun Aug 12 01:57:20 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:20 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 01:57:20 2012] Source does appear to be extended
[Sun Aug 12 01:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:20 2012] Source is confused with source 26
[Sun Aug 12 01:57:20 2012] Source is confused with source 27
[Sun Aug 12 01:57:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 01:57:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 01:57:56 2012] Initial guess for spatial extent in simple fitting = 15.44"
[Sun Aug 12 01:57:56 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.976
[Sun Aug 12 01:57:56 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 15.44"
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src16.ximg exists
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Aug 12 04:51:21 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src16 appears to have run properly
[Sun Aug 12 04:51:23 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Aug 12 04:51:23 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Aug 12 04:51:23 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Aug 12 08:02:27 2012] Spatial fit model total counts = 3905.330000, observed total counts = 3899.000000
[Sun Aug 12 08:02:27 2012] Offset between fit and detection position for source 21 = 1.540824 pixels
[Sun Aug 12 08:02:27 2012] 3854.150000 total counts/ 3726.080000 bgd. counts: snr = 2.098077
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.540824 pixels
  Position = (322.5, 321.8) = 16 2 11.04 15 58 29.3
  Extent = 16.0 (10.4-32.0)" x 7.2 (3.5-16.0)", rotation angle = 354 (341-0) degrees
  Source counts = 128.1 +/- 62.1
  Background counts = 3726.1
  Rate = 0.01 +/- 0.006
[Sun Aug 12 08:02:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 08:02:27 2012] Source does appear to be extended
[Sun Aug 12 08:02:27 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.65
[Sun Aug 12 08:02:49 2012] XMMSAS src. selection expression = ellipse(28012.691000, 27947.789000, 960.864028, 429.299412, 353.770000, X, Y)
[Sun Aug 12 08:02:49 2012] Writing source region out to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src21_src.reg
[Sun Aug 12 08:02:49 2012] Extracting stamp from image fullrun_pn_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (267, 267) - (378, 377)
[Sun Aug 12 08:02:49 2012] XMMSAS bgd. selection expression = annulus(28012.691000, 27947.789000, 1601.440046, 3202.880092, X, Y) && !ellipse(27879.378815, 30198.440704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.170044, 29224.116638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.381561, 29010.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.998627, 29075.565094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.005524, 29381.666077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.829407, 28835.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.968781, 28710.384399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.840668, 28392.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26192.545776, 28298.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28922.853336, 28327.838320, 827.296024, 827.296024, 0.000000, X, Y) && !ellipse(29632.030029, 27308.951080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28986.101227, 27276.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.544000, 27587.478400, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(27532.828461, 27263.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.602417, 27006.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.214000, 27557.028000, 1119.776032, 1119.776032, 0.000000, X, Y) && !ellipse(28742.714691, 26757.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25170.792267, 26830.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.976318, 26492.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.304840, 25781.045441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26883.817169, 25803.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25505.519775, 26320.972198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.236877, 25962.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.315094, 25177.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25475.561600, 25362.024400, 1064.544031, 1064.544031, 0.000000, X, Y) && !ellipse(27342.076200, 25311.858000, 541.903216, 541.903216, 0.000000, X, Y) && !ellipse(25377.629669, 24752.309204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28376.416000, 24332.428000, 1176.144034, 1176.144034, 0.000000, X, Y) && !ellipse(27473.812469, 24396.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27740.143800, 23914.780000, 1200.664035, 1200.664035, 0.000000, X, Y) && !ellipse(26337.290009, 24094.127441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.432892, 24118.463440, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 08:02:49 2012] Writing fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src21.gif
[Sun Aug 12 08:11:32 2012] Mean detx,y = (1580.68, 352.27) 
[Sun Aug 12 08:11:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 08:12:09 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 08:12:10 2012] Setting source spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Aug 12 08:12:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Aug 12 11:09:57 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:09:57 2012] Error reading totcts from fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Aug 12 11:10:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:00 2012] Using photon index=1.80, rate=0.0129, arf fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src21.arf
[Sun Aug 12 11:10:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:00 2012] Updating source flux to 3.6e-14
[Sun Aug 12 11:10:39 2012] Flag c found in src. 21 procflags, skipping spectral fitting