[Sat Aug 11 17:14:07 2012] Detection parameters:
  Position = (332.8, 325.1) = 16 2 7.93 15 58 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.6 +/- 21.2
  Background counts = 107.0
  Rate = 0.02 +/- 0.003

[Sat Aug 11 17:14:09 2012] Off-axis axis estimate = 3.16'
[Sat Aug 11 17:18:27 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 17:18:27 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Sat Aug 11 17:18:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.913
[Sat Aug 11 17:18:27 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.01"
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src17.ximg exists
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Aug 11 20:40:49 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src17 appears to have run properly
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Aug 11 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Aug 11 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Aug 11 20:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:19 2012] Spatial fit model total counts = -4542.430000, observed total counts = 1428.000000
[Sun Aug 12 01:57:19 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 01:57:19 2012] Warning, spatial fit 17 centroid is now closest to src. 18
[Sun Aug 12 01:57:20 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:20 2012] Assessing source extent using major
[Sun Aug 12 01:57:20 2012] Source does appear to be extended
[Sun Aug 12 01:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:56 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 01:57:56 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Aug 12 01:57:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.913
[Sun Aug 12 01:57:56 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.01"
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src15.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src15.csv
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src15.csv
[Sun Aug 12 04:51:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 04:51:23 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Aug 12 04:51:23 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Aug 12 04:51:23 2012] Fit fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Aug 12 08:02:27 2012] Spatial fit model total counts = 1920.790000, observed total counts = 1732.000000
[Sun Aug 12 08:02:27 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 08:02:27 2012] Spatial fit model total counts = 1775.350000, observed total counts = 1617.000000
[Sun Aug 12 08:02:27 2012] Offset between fit and detection position for source 19 = 1.034601 pixels
[Sun Aug 12 08:02:27 2012] 1690.651000 total counts/ 1590.030000 bgd. counts: snr = 2.523399
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.034601 pixels
  Position = (333.0, 326.2) = 16 2 7.88 15 58 48.3
  Extent = 10.3 (4.8-16.0)", rotation angle = 0
  Source counts = 100.6 +/- 41.1
  Background counts = 1590.0
  Rate = 0.01 +/- 0.004
[Sun Aug 12 08:02:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 08:02:27 2012] Source does appear to be extended
[Sun Aug 12 08:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 08:02:49 2012] XMMSAS src. selection expression = ellipse(28922.853336, 28327.838320, 620.472018, 620.472018, 0.000000, X, Y)
[Sun Aug 12 08:02:49 2012] Writing source region out to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19_src.reg
[Sun Aug 12 08:02:49 2012] Extracting stamp from image fullrun_pn_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (297, 291) - (369, 362)
[Sun Aug 12 08:02:49 2012] XMMSAS bgd. selection expression = annulus(28922.853336, 28327.838320, 1034.120030, 2068.240060, X, Y) && !ellipse(27879.378815, 30198.440704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.170044, 29224.116638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.381561, 29010.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.998627, 29075.565094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.829407, 28835.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.968781, 28710.384399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.840668, 28392.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26192.545776, 28298.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.691000, 27947.789000, 1281.152037, 572.399216, 353.770000, X, Y) && !ellipse(29632.030029, 27308.951080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28986.101227, 27276.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.544000, 27587.478400, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(27532.828461, 27263.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.214000, 27557.028000, 1119.776032, 1119.776032, 0.000000, X, Y) && !ellipse(28742.714691, 26757.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.976318, 26492.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.304840, 25781.045441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26883.817169, 25803.440613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.236877, 25962.423767, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 08:02:49 2012] Writing fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19.gif
[Sun Aug 12 08:10:59 2012] Mean detx,y = (2551.59, 374.40) 
[Sun Aug 12 08:11:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 08:11:22 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 08:11:23 2012] Setting source spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 12 08:11:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Aug 12 11:09:57 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:09:57 2012] Error reading totcts from fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 12 11:10:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:00 2012] Using photon index=1.80, rate=0.0102, arf fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19.arf
[Sun Aug 12 11:10:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:00 2012] Updating source flux to 2.5e-14
[Sun Aug 12 11:10:39 2012] Flag p found in src. 19 procflags, skipping spectral fitting
[Sun Aug 12 11:13:26 2012] Reading fit data from xmm0505210601/analysis//spectral/fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19_pl.csv
[Sun Aug 12 11:13:26 2012] Spectral fit parameter nH value = 3.63032e+21
[Sun Aug 12 11:13:26 2012] Spectral fit parameter PhoIndex value = 3.30253
[Sun Aug 12 11:13:26 2012] Failed to get F(0.3-8.0) from xmm0505210601/analysis//spectral/fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 11:13:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:13:26 2012] Using Nh = 3.6e+21, photon index=3.30, rate=0.0102, arf fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src19.arf
[Sun Aug 12 11:13:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:13:26 2012] Updating source flux to 2.2e-14