[Sat Aug 11 17:14:06 2012] Detection parameters:
  Position = (318.5, 334.0) = 16 2 12.25 15 59 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.2 +/- 16.5
  Background counts = 115.8
  Rate = 0.02 +/- 0.002

[Sat Aug 11 17:14:09 2012] Off-axis axis estimate = 2.96'
[Sat Aug 11 17:18:27 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 17:18:27 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sat Aug 11 17:18:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.884
[Sat Aug 11 17:18:27 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.91"
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src9.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src9.csv
[Sat Aug 11 20:40:49 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Aug 11 20:40:49 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src9.csv
[Sat Aug 11 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Aug 11 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Aug 11 20:40:50 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Aug 11 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Aug 11 20:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:19 2012] Warning, spatial fit 9 centroid is now closest to src. 16
[Sun Aug 12 01:57:20 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:20 2012] Assessing source extent using major
[Sun Aug 12 01:57:20 2012] Source does appear to be extended
[Sun Aug 12 01:57:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:20 2012] Source is confused with source 10
[Sun Aug 12 01:57:56 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 01:57:56 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Aug 12 01:57:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.884
[Sun Aug 12 01:57:56 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.91"
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src8.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src8.csv
[Sun Aug 12 04:51:21 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Aug 12 04:51:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src8.csv
[Sun Aug 12 04:51:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 04:51:23 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Aug 12 04:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Aug 12 04:51:23 2012] fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Aug 12 04:51:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Aug 12 04:51:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 08:02:27 2012] Warning, spatial fit 8 centroid is now closest to src. 15
[Sun Aug 12 08:02:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:27 2012] Assessing source extent using major
[Sun Aug 12 08:02:27 2012] Source does appear to be extended
[Sun Aug 12 08:02:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 08:02:49 2012] XMMSAS src. selection expression = ellipse(27663.381561, 29010.933716, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 08:02:49 2012] Writing source region out to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src11_src.reg
[Sun Aug 12 08:02:49 2012] Extracting stamp from image fullrun_pn_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (281, 297) - (356, 372)
[Sun Aug 12 08:02:49 2012] XMMSAS bgd. selection expression = annulus(27663.381561, 29010.933716, 1087.500000, 2175.000000, X, Y) && !ellipse(27879.378815, 30198.440704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28214.170044, 29224.116638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.998627, 29075.565094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.005524, 29381.666077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.829407, 28835.492035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.968781, 28710.384399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26630.840668, 28392.054352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26192.545776, 28298.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28922.853336, 28327.838320, 827.296024, 827.296024, 0.000000, X, Y) && !ellipse(28012.691000, 27947.789000, 1281.152037, 572.399216, 353.770000, X, Y) && !ellipse(29632.030029, 27308.951080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28986.101227, 27276.644684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26395.544000, 27587.478400, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(27532.828461, 27263.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.602417, 27006.402527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.214000, 27557.028000, 1119.776032, 1119.776032, 0.000000, X, Y) && !ellipse(28742.714691, 26757.902405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25170.792267, 26830.209473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.976318, 26492.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25505.519775, 26320.972198, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 08:02:49 2012] Writing fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src11.gif
[Sun Aug 12 08:07:15 2012] Mean detx,y = (1683.66, -644.65) 
[Sun Aug 12 08:07:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 08:07:40 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 08:07:41 2012] Setting source spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Aug 12 08:07:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Aug 12 08:35:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 08:35:47 2012] rmf not generated due to insufficient counts
[Sun Aug 12 11:09:57 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:09:57 2012] Error reading totcts from fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Aug 12 11:09:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:09:59 2012] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src11.arf
[Sun Aug 12 11:09:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:09:59 2012] Updating source flux to 4.2e-14
[Sun Aug 12 11:10:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 12 11:13:26 2012] xmm0505210601/analysis//spectral/fullrun_pn_xmm0505210601_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete