[Sat Aug 11 17:15:36 2012] Detection parameters:
  Position = (312.9, 332.9) = 16 2 13.94 15 59 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.4 +/- 14.1
  Background counts = 39.0
  Rate = 0.006 +/- 0.001

[Sat Aug 11 17:15:37 2012] Off-axis axis estimate = 2.71'
[Sat Aug 11 22:58:50 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 22:58:50 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Sat Aug 11 22:58:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Sat Aug 11 22:58:50 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.78"
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src18.ximg exists
[Sun Aug 12 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src18.csv
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Aug 12 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src18.csv
[Sun Aug 12 01:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:00 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Aug 12 01:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Aug 12 01:57:00 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Aug 12 01:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Aug 12 01:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:39 2012] Warning, spatial fit 18 centroid is now closest to src. 5
[Sun Aug 12 01:57:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:39 2012] Assessing source extent using major
[Sun Aug 12 01:57:39 2012] Source does appear to be extended
[Sun Aug 12 01:57:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 06:24:17 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 06:24:17 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Sun Aug 12 06:24:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.763
[Sun Aug 12 06:24:17 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.78"
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src14.ximg exists
[Sun Aug 12 08:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src14.csv
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Aug 12 08:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src14.csv
[Sun Aug 12 08:02:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 08:02:17 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Aug 12 08:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Aug 12 08:02:17 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Aug 12 08:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Aug 12 08:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 08:02:38 2012] Source 7 is offset by 0.446364 and -4.865714 pixels which is larger than
2 X fitted extent = 2.638014 x 2.638014, not incorporating fit results
[Sun Aug 12 08:02:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:38 2012] Assessing source extent using major
[Sun Aug 12 08:02:38 2012] Source does appear to be extended
[Sun Aug 12 08:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 10:48:17 2012] XMMSAS src. selection expression = ellipse(27174.707489, 28916.974884, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 10:48:17 2012] Writing source region out to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src7_src.reg
[Sun Aug 12 10:48:17 2012] Extracting stamp from image fullrun_mos2_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (275, 295) - (350, 370)
[Sun Aug 12 10:48:17 2012] XMMSAS bgd. selection expression = annulus(27174.707489, 28916.974884, 1087.500000, 2175.000000, X, Y) && !ellipse(26331.929504, 27697.201324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.164734, 27005.924622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.948334, 27971.577362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26940.172821, 27004.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.847046, 26472.712433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24881.720000, 28452.572200, 1211.568035, 1211.568035, 0.000000, X, Y) && !ellipse(25811.214539, 28787.550171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.722076, 28110.530975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.278839, 27009.668213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.220184, 26405.062286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26025.337341, 27275.569397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.129852, 28807.667328, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 10:48:17 2012] Writing fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src7.gif
[Sun Aug 12 10:53:28 2012] Mean detx,y = (-1100.53, 676.90) 
[Sun Aug 12 10:53:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:53:47 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:53:47 2012] Setting source spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Aug 12 10:53:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Aug 12 11:06:30 2012] Not generating rmf since there are only 68 counts
[Sun Aug 12 11:06:30 2012] rmf not generated due to insufficient counts
[Sun Aug 12 11:10:07 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:10:07 2012] Error reading totcts from fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Aug 12 11:10:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:08 2012] Using photon index=1.80, rate=0.00629, arf fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src7.arf
[Sun Aug 12 11:10:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:08 2012] Updating source flux to 6e-14
[Sun Aug 12 11:10:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting