[Sat Aug 11 17:15:37 2012] Detection parameters:
  Position = (348.9, 195.0) = 16 2 3.09 15 49 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.3 +/- 15.0
  Background counts = 9.4
  Rate = 0.02 +/- 0.002

[Sat Aug 11 17:15:37 2012] Off-axis axis estimate = 8.35'
[Sat Aug 11 22:58:50 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 22:58:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 22:58:50 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Sat Aug 11 22:58:50 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.043
[Sat Aug 11 22:58:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.60"
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 01:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:00 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 01:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 01:57:00 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 01:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 01:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:39 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 13.729056 pixels away
[Sun Aug 12 01:57:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:39 2012] Assessing source extent using major
[Sun Aug 12 01:57:39 2012] Source does appear to be extended
[Sun Aug 12 01:57:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 06:24:17 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 06:24:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 06:24:17 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Sun Aug 12 06:24:17 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.043
[Sun Aug 12 06:24:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.60"
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 12 08:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 12 08:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 08:02:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 12 08:02:16 2012] Fit fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 12 08:02:38 2012] Spatial fit model total counts = 281.093000, observed total counts = 267.000000
[Sun Aug 12 08:02:38 2012] Offset between fit and detection position for source 43 = 0.120337 pixels
[Sun Aug 12 08:02:38 2012] 280.265000 total counts/ 168.866000 bgd. counts: snr = 8.572553
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.120337 pixels
  Position = (349.1, 195.0) = 16 2 3.05 15 49 17.6
  Extent = 5.9 (4.8-7.1)", rotation angle = 0
  Source counts = 111.4 +/- 16.7
  Background counts = 168.9
  Rate = 0.01 +/- 0.001
[Sun Aug 12 08:02:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:38 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 08:02:38 2012] Source does appear to be extended
[Sun Aug 12 08:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 10:48:17 2012] XMMSAS src. selection expression = ellipse(30319.547200, 16913.343400, 353.745010, 353.745010, 0.000000, X, Y)
[Sun Aug 12 10:48:17 2012] Writing source region out to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43_src.reg
[Sun Aug 12 10:48:17 2012] Extracting stamp from image fullrun_mos2_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (329, 175) - (369, 215)
[Sun Aug 12 10:48:17 2012] XMMSAS bgd. selection expression = annulus(30319.547200, 16913.343400, 589.575017, 1179.150034, X, Y)
[Sun Aug 12 10:48:17 2012] Writing fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43.gif
[Sun Aug 12 10:48:20 2012] Mean detx,y = (405.94, -11614.10) 
[Sun Aug 12 10:48:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:48:43 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:48:43 2012] Setting source spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Aug 12 10:48:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Aug 12 11:10:05 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:10:06 2012] Error reading totcts from fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Aug 12 11:10:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:07 2012] Using photon index=1.80, rate=0.00959, arf fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43.arf
[Sun Aug 12 11:10:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:07 2012] Updating source flux to 2.1e-13
[Sun Aug 12 11:10:39 2012] Reading fit data from xmm0505210601/analysis//spectral/fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43_pl.csv
[Sun Aug 12 11:10:39 2012] Spectral fit parameter nH value = 1.48257e+15
[Sun Aug 12 11:10:39 2012] Spectral fit parameter PhoIndex value = 1.50051
[Sun Aug 12 11:10:39 2012] Failed to get F(0.3-8.0) from xmm0505210601/analysis//spectral/fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 11:10:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:39 2012] Using Nh = 1.5e+15, photon index=1.50, rate=0.00959, arf fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src43.arf
[Sun Aug 12 11:10:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:39 2012] Updating source flux to 2.5e-13