[Sat Aug 11 17:15:37 2012] Detection parameters:
  Position = (308.7, 292.9) = 16 2 15.20 15 56 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.0 +/- 13.9
  Background counts = 39.0
  Rate = 0.006 +/- 0.001

[Sat Aug 11 17:15:37 2012] Off-axis axis estimate = 0.85'
[Sat Aug 11 22:58:50 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 22:58:50 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Sat Aug 11 22:58:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Sat Aug 11 22:58:50 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 6.85"
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src30.ximg exists
[Sun Aug 12 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src30.csv
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Aug 12 01:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src30.csv
[Sun Aug 12 01:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:01 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Aug 12 01:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Aug 12 01:57:01 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Aug 12 01:57:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Aug 12 01:57:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:39 2012] Source 34 is offset by 2.313563 and -7.313338 pixels which is larger than
2 X fitted extent = 0.882717 x 0.882717, not incorporating fit results
[Sun Aug 12 01:57:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:39 2012] Assessing source extent using major
[Sun Aug 12 01:57:39 2012] Source does appear to be extended
[Sun Aug 12 01:57:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:39 2012] Source is confused with source 35
[Sun Aug 12 06:24:17 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 06:24:17 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Sun Aug 12 06:24:17 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Sun Aug 12 06:24:17 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 6.85"
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src20.ximg exists
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Aug 12 08:02:16 2012] Fit fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Aug 12 08:02:17 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Aug 12 08:02:17 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Aug 12 08:02:17 2012] Fit fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Aug 12 08:02:38 2012] Source 34 is offset by 5.964551 and 5.184041 pixels which is larger than
2 X fitted extent = 0.906970 x 0.906970, not incorporating fit results
[Sun Aug 12 08:02:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:38 2012] Assessing source extent using major
[Sun Aug 12 08:02:38 2012] Source does appear to be extended
[Sun Aug 12 08:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 10:48:17 2012] XMMSAS src. selection expression = ellipse(26812.611938, 25432.259552, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 10:48:17 2012] Writing source region out to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src34_src.reg
[Sun Aug 12 10:48:17 2012] Extracting stamp from image fullrun_mos2_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (271, 255) - (346, 330)
[Sun Aug 12 10:48:17 2012] XMMSAS bgd. selection expression = annulus(26812.611938, 25432.259552, 1087.500000, 2175.000000, X, Y) && !ellipse(27304.827820, 25185.270142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.929504, 27697.201324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.164734, 27005.924622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.948334, 27971.577362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26940.172821, 27004.522766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.847046, 26472.712433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24881.720000, 28452.572200, 1211.568035, 1211.568035, 0.000000, X, Y) && !ellipse(26659.722076, 28110.530975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.278839, 27009.668213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28304.390594, 25242.918793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.460480, 24573.068176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27172.694977, 24312.854065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.220184, 26405.062286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25586.622955, 25172.464935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26025.337341, 27275.569397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27816.696228, 23711.763397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.707428, 25698.795288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27850.024811, 22883.765961, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 10:48:17 2012] Writing fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src34.gif
[Sun Aug 12 10:55:28 2012] Mean detx,y = (491.62, -2433.09) 
[Sun Aug 12 10:55:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:55:43 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:55:44 2012] Setting source spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Aug 12 10:55:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Aug 12 11:08:00 2012] Not generating rmf since there are only 62 counts
[Sun Aug 12 11:08:00 2012] rmf not generated due to insufficient counts
[Sun Aug 12 11:10:07 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:10:07 2012] Error reading totcts from fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Aug 12 11:10:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:08 2012] Using photon index=1.80, rate=0.00559, arf fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src34.arf
[Sun Aug 12 11:10:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:08 2012] Updating source flux to 6e-14
[Sun Aug 12 11:10:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting