[Sat Aug 11 17:15:36 2012] Detection parameters:
  Position = (310.2, 311.0) = 16 2 14.76 15 57 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 14.6
  Background counts = 41.0
  Rate = 0.007 +/- 0.001

[Sat Aug 11 17:15:37 2012] Off-axis axis estimate = 1.25'
[Sat Aug 11 22:58:50 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 22:58:50 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Sat Aug 11 22:58:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.889
[Sat Aug 11 22:58:50 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.05"
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src11.ximg exists
[Sun Aug 12 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src11.csv
[Sun Aug 12 01:56:59 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Aug 12 01:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src11.csv
[Sun Aug 12 01:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:00 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Aug 12 01:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Aug 12 01:57:00 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Aug 12 01:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Aug 12 01:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 01:57:39 2012] Source 27 is offset by 0.602262 and -1.433348 pixels which is larger than
2 X fitted extent = 0.826547 x 0.826547, not incorporating fit results
[Sun Aug 12 01:57:39 2012] Warning, spatial fit 11 centroid is now closest to src. 26
[Sun Aug 12 01:57:39 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:39 2012] Assessing source extent using major
[Sun Aug 12 01:57:39 2012] Source does appear to be extended
[Sun Aug 12 01:57:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:39 2012] Source is confused with source 22
[Sun Aug 12 06:24:17 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 06:24:17 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Sun Aug 12 06:24:17 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.889
[Sun Aug 12 06:24:17 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.05"
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src8.ximg exists
[Sun Aug 12 08:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src8.csv
[Sun Aug 12 08:02:16 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Aug 12 08:02:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src8.csv
[Sun Aug 12 08:02:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 08:02:17 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Aug 12 08:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Aug 12 08:02:17 2012] fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Aug 12 08:02:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Aug 12 08:02:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 08:02:38 2012] Warning, spatial fit 8 centroid is now closest to src. 22
[Sun Aug 12 08:02:38 2012] Source 27 is offset by 1.211458 and 4.871623 pixels which is larger than
2 X fitted extent = 0.849922 x 0.849922, not incorporating fit results
[Sun Aug 12 08:02:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:38 2012] Assessing source extent using major
[Sun Aug 12 08:02:38 2012] Source does appear to be extended
[Sun Aug 12 08:02:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 10:48:17 2012] XMMSAS src. selection expression = ellipse(26940.172821, 27004.522766, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 10:48:17 2012] Writing source region out to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src27_src.reg
[Sun Aug 12 10:48:17 2012] Extracting stamp from image fullrun_mos2_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (273, 273) - (348, 348)
[Sun Aug 12 10:48:17 2012] XMMSAS bgd. selection expression = annulus(26940.172821, 27004.522766, 1087.500000, 2175.000000, X, Y) && !ellipse(27304.827820, 25185.270142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.929504, 27697.201324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.164734, 27005.924622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.948334, 27971.577362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.847046, 26472.712433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24881.720000, 28452.572200, 1211.568035, 1211.568035, 0.000000, X, Y) && !ellipse(25811.214539, 28787.550171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26659.722076, 28110.530975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.278839, 27009.668213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27174.707489, 28916.974884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28304.390594, 25242.918793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.460480, 24573.068176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27172.694977, 24312.854065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.220184, 26405.062286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26812.611938, 25432.259552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25586.622955, 25172.464935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26025.337341, 27275.569397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.707428, 25698.795288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.129852, 28807.667328, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 10:48:17 2012] Writing fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src27.gif
[Sun Aug 12 10:51:03 2012] Mean detx,y = (-104.64, -979.22) 
[Sun Aug 12 10:51:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:51:24 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:51:24 2012] Setting source spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Aug 12 10:51:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Aug 12 11:05:23 2012] Not generating rmf since there are only 77 counts
[Sun Aug 12 11:05:23 2012] rmf not generated due to insufficient counts
[Sun Aug 12 11:10:06 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:10:06 2012] Error reading totcts from fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Aug 12 11:10:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:08 2012] Using photon index=1.80, rate=0.00694, arf fullrun_mos2_xmm0505210601_pi300-10000_pass1_cl_src27.arf
[Sun Aug 12 11:10:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:08 2012] Updating source flux to 7.4e-14
[Sun Aug 12 11:10:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting