[Sat Aug 11 17:14:46 2012] Detection parameters:
  Position = (304.0, 319.8) = 16 2 16.63 15 58 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.2 +/- 16.3
  Background counts = 43.1
  Rate = 0.009 +/- 0.001

[Sat Aug 11 17:14:46 2012] Off-axis axis estimate = 1.60'
[Sat Aug 11 20:40:51 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 20:40:51 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Aug 11 20:40:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Sat Aug 11 20:40:51 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.23"
[Sat Aug 11 22:58:48 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_src4.ximg exists
[Sat Aug 11 22:58:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_src4.csv
[Sat Aug 11 22:58:48 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Aug 11 22:58:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_src4.csv
[Sat Aug 11 22:58:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 22:58:49 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Aug 11 22:58:49 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Aug 11 22:58:49 2012] Fit fullrun_mos1_xmm0505210601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Aug 12 01:57:30 2012] Source 18 is offset by -3.424970 and 4.252542 pixels which is larger than
2 X fitted extent = 0.939687 x 0.939687, not incorporating fit results
[Sun Aug 12 01:57:30 2012] Spatial fit model total counts = 869.959000, observed total counts = 870.000000
[Sun Aug 12 01:57:30 2012] Offset between fit and detection position for source 18 = 0.234943 pixels
[Sun Aug 12 01:57:30 2012] 820.383000 total counts/ 692.671000 bgd. counts: snr = 4.852530
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.234943 pixels
  Position = (304.0, 320.1) = 16 2 16.62 15 58 21.7
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 127.7 +/- 28.6
  Background counts = 692.7
  Rate = 0.01 +/- 0.002
[Sun Aug 12 01:57:30 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 01:57:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 01:57:30 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 01:57:30 2012] Source does appear to be extended
[Sun Aug 12 01:57:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 01:57:30 2012] Source is confused with source 20
[Sun Aug 12 01:57:30 2012] Source is confused with source 12
[Sun Aug 12 04:51:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 04:51:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 04:51:25 2012] Initial guess for spatial extent in simple fitting = 14.46"
[Sun Aug 12 04:51:25 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.094
[Sun Aug 12 04:51:25 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.46"
[Sun Aug 12 06:24:16 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass1_src4.ximg exists
[Sun Aug 12 06:24:16 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Aug 12 06:24:16 2012] Fit fullrun_mos1_xmm0505210601_pi300-10000_cl_pass1_src4 appears to have run properly
[Sun Aug 12 06:24:16 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Aug 12 06:24:16 2012] fullrun_mos1_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Aug 12 06:24:16 2012] Fit fullrun_mos1_xmm0505210601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Aug 12 08:02:32 2012] Warning, spatial fit 4 centroid is now closest to src. 17
[Sun Aug 12 08:02:32 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 08:02:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 08:02:32 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 08:02:32 2012] Source does appear to be extended
[Sun Aug 12 08:02:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 10:26:25 2012] XMMSAS src. selection expression = ellipse(26402.136800, 27795.993680, 867.540025, 867.540025, 0.000000, X, Y)
[Sun Aug 12 10:26:25 2012] Writing source region out to fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18_src.reg
[Sun Aug 12 10:26:25 2012] Extracting stamp from image fullrun_mos1_xmm0505210601_pi300-10000_cl_sm2.00.img.gz, (254, 270) - (354, 370)
[Sun Aug 12 10:26:25 2012] XMMSAS bgd. selection expression = annulus(26402.136800, 27795.993680, 1445.900042, 2891.800083, X, Y) && !ellipse(27350.151640, 25225.050200, 529.950415, 529.950415, 0.000000, X, Y) && !ellipse(27264.551025, 27017.835083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27256.169098, 27962.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.537292, 27618.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.470215, 27097.464722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26473.307159, 26986.057037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25089.341278, 28810.582550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26822.324036, 25861.739746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.093200, 28762.231600, 1643.072047, 304.678409, 10.736600, X, Y) && !ellipse(26506.526886, 28214.977173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27678.517883, 28312.286652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27412.462708, 25955.010925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25273.571106, 26379.637726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27698.029694, 26501.118591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27978.060944, 29158.996735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.842000, 25532.780260, 1081.064031, 1081.064031, 0.000000, X, Y) && !ellipse(27774.847656, 24679.954346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.055084, 27755.418152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28213.050000, 28354.626000, 1275.352037, 1275.352037, 0.000000, X, Y)
[Sun Aug 12 10:26:25 2012] Writing fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18.gif
[Sun Aug 12 10:27:47 2012] Mean detx,y = (130.10, -208.03) 
[Sun Aug 12 10:27:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 10:28:08 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 10:28:09 2012] Setting source spectrum file to fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Aug 12 10:28:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Aug 12 11:10:03 2012] Updating aperture counts using extracted products
[Sun Aug 12 11:10:03 2012] Error reading totcts from fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Aug 12 11:10:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:04 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18.arf
[Sun Aug 12 11:10:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:04 2012] Updating source flux to 1e-13
[Sun Aug 12 11:10:11 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Sun Aug 12 11:10:11 2012] Flag c found in src. 18 procflags, skipping spectral fitting
[Sun Aug 12 11:10:24 2012] Reading fit data from xmm0505210601/analysis//spectral/fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18_pl.csv
[Sun Aug 12 11:10:24 2012] Spectral fit parameter nH value = 1.41248e+21
[Sun Aug 12 11:10:24 2012] Spectral fit parameter PhoIndex value = 1.97832
[Sun Aug 12 11:10:24 2012] Failed to get F(0.3-8.0) from xmm0505210601/analysis//spectral/fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 11:10:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 11:10:24 2012] Using Nh = 1.4e+21, photon index=1.98, rate=0.011, arf fullrun_mos1_xmm0505210601_pi300-10000_pass1_cl_src18.arf
[Sun Aug 12 11:10:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 11:10:24 2012] Updating source flux to 1.1e-13