[Tue Dec 20 12:47:56 2011] Detection parameters:
  Position = (321.7, 290.1) = 6 26 20.98 -53 43 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.2 +/- 28.7
  Background counts = 259.5
  Rate = 0.009 +/- 0.001

[Tue Dec 20 12:47:57 2011] Off-axis axis estimate = 1.79'
[Tue Dec 20 12:54:00 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:54:00 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Tue Dec 20 12:54:00 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue Dec 20 12:54:00 2011] Giving source the simple spatial ID 54 for pass 0, mean size = 7.33"
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src54.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src54.csv
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src54.csv
[Tue Dec 20 17:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 17:53:38 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue Dec 20 17:53:38 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue Dec 20 17:53:38 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Wed Dec 21 02:11:02 2011] Warning, spatial fit 54 centroid is now closest to src. 62
[Wed Dec 21 02:11:02 2011] Source 57 is offset by 7.314051 and 3.087330 pixels which is larger than
2 X fitted extent = 0.820869 x 0.820869, not incorporating fit results
[Wed Dec 21 02:11:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 02:11:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 02:11:02 2011] Assessing source extent using major
[Wed Dec 21 02:11:02 2011] Source does appear to be extended
[Wed Dec 21 02:11:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 02:12:07 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 02:12:07 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Wed Dec 21 02:12:07 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Wed Dec 21 02:12:07 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 7.33"
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src49.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src49.csv
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src49_1.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src49.csv
[Wed Dec 21 11:14:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 11:14:31 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Wed Dec 21 11:14:31 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Wed Dec 21 11:14:31 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Wed Dec 21 17:41:44 2011] Warning, spatial fit 49 centroid is now closest to src. 61
[Wed Dec 21 17:41:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:41:44 2011] Assessing source extent using major
[Wed Dec 21 17:41:44 2011] Source does appear to be extended
[Wed Dec 21 17:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 17:41:45 2011] Source is confused with source 4
[Wed Dec 21 17:41:45 2011] Source is confused with source 59
[Wed Dec 21 17:42:32 2011] XMMSAS src. selection expression = ellipse(27942.467621, 25187.805695, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 21 17:42:32 2011] Writing source region out to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src57_src.reg
[Wed Dec 21 17:42:32 2011] Extracting stamp from image fullrun_pn_xmm0505210401_pi300-10000_cl_sm2.00.img.gz, (284, 253) - (359, 328)
[Wed Dec 21 17:42:32 2011] XMMSAS bgd. selection expression = annulus(27942.467621, 25187.805695, 1087.500000, 2175.000000, X, Y) && !ellipse(28314.049600, 26869.493000, 2455.792071, 972.616028, 211.088000, X, Y) && !ellipse(27999.184357, 28092.099762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.080000, 27788.688000, 714.293621, 714.293621, 0.000000, X, Y) && !ellipse(29019.976746, 27525.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.290000, 26821.906000, 1805.040052, 1805.040052, 0.000000, X, Y) && !ellipse(25169.057200, 27945.623740, 636.528018, 636.528018, 0.000000, X, Y) && !ellipse(29436.646423, 26468.230743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29329.253143, 25972.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.186200, 27063.573800, 1127.664032, 1127.664032, 0.000000, X, Y) && !ellipse(28979.284000, 26418.216000, 1256.184036, 1256.184036, 0.000000, X, Y) && !ellipse(28584.166962, 28222.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.618000, 27507.606000, 1302.392037, 1302.392037, 0.000000, X, Y) && !ellipse(30440.812000, 27815.718000, 2672.656077, 2672.656077, 0.000000, X, Y) && !ellipse(26296.078000, 27685.874600, 2258.728065, 2258.728065, 0.000000, X, Y) && !ellipse(29980.892000, 27191.330000, 1336.328038, 1336.328038, 0.000000, X, Y) && !ellipse(29799.212000, 27142.774000, 1266.192036, 549.160016, 21.410000, X, Y) && !ellipse(29791.910000, 26166.500000, 687.712020, 687.712020, 0.000000, X, Y) && !ellipse(25597.750000, 26742.687600, 1085.824031, 1085.824031, 0.000000, X, Y) && !ellipse(26672.665344, 26155.489532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30357.994690, 25732.710632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27378.127869, 25624.364197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.294400, 24375.162000, 2546.976073, 1508.984043, 292.234000, X, Y) && !ellipse(26118.324432, 25096.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.709808, 25370.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28109.434448, 24518.334747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30958.270200, 24293.808000, 2246.264065, 1263.336036, 306.060100, X, Y)
[Wed Dec 21 17:42:32 2011] Writing fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src57.gif
[Wed Dec 21 19:42:09 2011] Mean detx,y = (1053.23, 1113.45) 
[Wed Dec 21 19:42:14 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 19:42:35 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 19:42:35 2011] Setting source spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Wed Dec 21 19:42:35 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Thu Dec 22 17:14:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec 22 17:14:23 2011] rmf not generated due to insufficient counts
[Thu Dec 22 23:09:06 2011] Updating aperture counts using extracted products
[Thu Dec 22 23:09:06 2011] Error reading totcts from fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Thu Dec 22 23:09:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 23:09:12 2011] Using photon index=1.80, rate=0.00854, arf fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src57.arf
[Thu Dec 22 23:09:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 23:09:12 2011] Updating source flux to 2e-14
[Thu Dec 22 23:17:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting