[Tue Dec 20 12:47:56 2011] Detection parameters:
  Position = (375.9, 298.2) = 6 25 54.44 -53 42 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.6 +/- 20.2
  Background counts = 158.2
  Rate = 0.005 +/- 0.001

[Tue Dec 20 12:47:57 2011] Off-axis axis estimate = 5.62'
[Tue Dec 20 12:54:00 2011] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:54:00 2011] Initial guess for spatial extent in simple fitting = 9.24"
[Tue Dec 20 12:54:00 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.090
[Tue Dec 20 12:54:00 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 9.24"
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src47.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src47.csv
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src47_1.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src47.csv
[Tue Dec 20 17:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Tue Dec 20 17:53:37 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Wed Dec 21 02:11:02 2011] Spatial fit model total counts = 1543.240000, observed total counts = 1542.000000
[Wed Dec 21 02:11:02 2011] Offset between fit and detection position for source 50 = 6.121708 pixels
[Wed Dec 21 02:11:02 2011] 1555.683000 total counts/ 1067.810000 bgd. counts: snr = 14.929999
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 6.121708 pixels
  Position = (380.4, 294.1) = 6 25 52.23 -53 42 43.0
  Extent = 18.5 (18.4-36.9)", rotation angle = 0
  Source counts = 487.9 +/- 39.4
  Background counts = 1067.8
  Rate = 0.02 +/- 0.002
[Wed Dec 21 02:11:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 02:11:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 02:11:02 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 02:11:02 2011] Source does appear to be extended
[Wed Dec 21 02:11:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 02:12:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 02:12:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 02:12:07 2011] Initial guess for spatial extent in simple fitting = 18.47"
[Wed Dec 21 02:12:07 2011] source mask rpix=4.2, npix_max = 90, mask sum = 76, frac = 0.843
[Wed Dec 21 02:12:07 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 18.47"
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src45.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src45.csv
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src45_1.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src45.csv
[Wed Dec 21 11:14:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 11:14:31 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Wed Dec 21 11:14:31 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Wed Dec 21 11:14:31 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Wed Dec 21 17:41:44 2011] Warning, spatial fit 45 centroid is now closest to src. 23
[Wed Dec 21 17:41:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:41:44 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 17:41:44 2011] Source does appear to be extended
[Wed Dec 21 17:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 17:42:32 2011] XMMSAS src. selection expression = ellipse(33048.348000, 25537.656000, 1108.434032, 1108.434032, 0.000000, X, Y)
[Wed Dec 21 17:42:32 2011] Writing source region out to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src50_src.reg
[Wed Dec 21 17:42:32 2011] Extracting stamp from image fullrun_pn_xmm0505210401_pi300-10000_cl_sm2.00.img.gz, (317, 230) - (444, 358)
[Wed Dec 21 17:42:32 2011] XMMSAS bgd. selection expression = annulus(33048.348000, 25537.656000, 1847.390053, 3694.780106, X, Y) && !ellipse(28314.049600, 26869.493000, 2455.792071, 972.616028, 211.088000, X, Y) && !ellipse(29019.976746, 27525.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.290000, 26821.906000, 1805.040052, 1805.040052, 0.000000, X, Y) && !ellipse(29436.646423, 26468.230743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29329.253143, 25972.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28979.284000, 26418.216000, 1256.184036, 1256.184036, 0.000000, X, Y) && !ellipse(33248.394989, 23270.157684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.166962, 28222.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.618000, 27507.606000, 1302.392037, 1302.392037, 0.000000, X, Y) && !ellipse(30440.812000, 27815.718000, 2672.656077, 2672.656077, 0.000000, X, Y) && !ellipse(29980.892000, 27191.330000, 1336.328038, 1336.328038, 0.000000, X, Y) && !ellipse(29799.212000, 27142.774000, 1266.192036, 549.160016, 21.410000, X, Y) && !ellipse(31323.342102, 26446.047974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29791.910000, 26166.500000, 687.712020, 687.712020, 0.000000, X, Y) && !ellipse(30357.994690, 25732.710632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31328.602600, 25240.477800, 884.904025, 884.904025, 0.000000, X, Y) && !ellipse(29018.294400, 24375.162000, 2546.976073, 1508.984043, 292.234000, X, Y) && !ellipse(28720.709808, 25370.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30958.270200, 24293.808000, 2246.264065, 1263.336036, 306.060100, X, Y)
[Wed Dec 21 17:42:32 2011] Writing fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src50.gif
[Wed Dec 21 19:38:02 2011] Mean detx,y = (5329.26, -1691.50) 
[Wed Dec 21 19:38:07 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 19:39:25 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 19:39:25 2011] Setting source spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Dec 21 19:39:25 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Thu Dec 22 23:09:06 2011] Updating aperture counts using extracted products
[Thu Dec 22 23:09:06 2011] Error reading totcts from fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Dec 22 23:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 23:09:11 2011] Using photon index=1.80, rate=0.0228, arf fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src50.arf
[Thu Dec 22 23:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 23:09:12 2011] Updating source flux to 6.7e-14