[Tue Dec 20 12:47:56 2011] Detection parameters:
  Position = (300.3, 308.1) = 6 26 31.49 -53 41 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.5 +/- 31.5
  Background counts = 237.1
  Rate = 0.02 +/- 0.002

[Tue Dec 20 12:47:57 2011] Off-axis axis estimate = 0.72'
[Tue Dec 20 12:54:00 2011] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:54:00 2011] Initial guess for spatial extent in simple fitting = 6.79"
[Tue Dec 20 12:54:00 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.943
[Tue Dec 20 12:54:00 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 6.79"
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src45.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src45.csv
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src45.csv
[Tue Dec 20 17:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Dec 20 17:53:37 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Wed Dec 21 02:11:02 2011] Spatial fit model total counts = 3504.460000, observed total counts = 3503.000000
[Wed Dec 21 02:11:02 2011] Offset between fit and detection position for source 48 = 5.511822 pixels
[Wed Dec 21 02:11:02 2011] 3609.326000 total counts/ 3179.610000 bgd. counts: snr = 7.620695
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 5.511822 pixels
  Position = (294.8, 307.9) = 6 26 34.19 -53 41 43.1
  Extent = 13.6 (13.5-27.1)", rotation angle = 0
  Source counts = 429.7 +/- 60.1
  Background counts = 3179.6
  Rate = 0.02 +/- 0.003
[Wed Dec 21 02:11:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 02:11:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 02:11:02 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 02:11:02 2011] Source does appear to be extended
[Wed Dec 21 02:11:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 02:12:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 02:12:07 2011] Initial guess for spatial extent in simple fitting = 13.57"
[Wed Dec 21 02:12:07 2011] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.897
[Wed Dec 21 02:12:07 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 13.57"
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src43.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src43.csv
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src43.csv
[Wed Dec 21 11:14:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed Dec 21 11:14:31 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Wed Dec 21 17:41:44 2011] Warning, spatial fit 43 centroid is now closest to src. 60
[Wed Dec 21 17:41:44 2011] Source 48 is offset by -6.000345 and 0.253628 pixels which is larger than
2 X fitted extent = 0.776956 x 0.776956, not incorporating fit results
[Wed Dec 21 17:41:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:41:44 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 17:41:44 2011] Source does appear to be extended
[Wed Dec 21 17:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 17:41:45 2011] Source is confused with source 43
[Wed Dec 21 17:42:31 2011] XMMSAS src. selection expression = ellipse(25597.750000, 26742.687600, 814.368023, 814.368023, 0.000000, X, Y)
[Wed Dec 21 17:42:31 2011] Writing source region out to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src48_src.reg
[Wed Dec 21 17:42:31 2011] Extracting stamp from image fullrun_pn_xmm0505210401_pi300-10000_cl_sm2.00.img.gz, (248, 261) - (342, 355)
[Wed Dec 21 17:42:31 2011] XMMSAS bgd. selection expression = annulus(25597.750000, 26742.687600, 1357.280039, 2714.560078, X, Y) && !ellipse(28314.049600, 26869.493000, 2455.792071, 972.616028, 211.088000, X, Y) && !ellipse(27538.560669, 28349.834076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.184357, 28092.099762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.080000, 27788.688000, 714.293621, 714.293621, 0.000000, X, Y) && !ellipse(29019.976746, 27525.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.290000, 26821.906000, 1805.040052, 1805.040052, 0.000000, X, Y) && !ellipse(25169.057200, 27945.623740, 636.528018, 636.528018, 0.000000, X, Y) && !ellipse(26800.186200, 27063.573800, 1127.664032, 1127.664032, 0.000000, X, Y) && !ellipse(28979.284000, 26418.216000, 1256.184036, 1256.184036, 0.000000, X, Y) && !ellipse(27320.662000, 28776.236000, 983.472028, 983.472028, 0.000000, X, Y) && !ellipse(27895.452362, 29155.093842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.993400, 29024.419000, 1233.760036, 1233.760036, 0.000000, X, Y) && !ellipse(28584.166962, 28222.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.767639, 27783.646423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.618000, 27507.606000, 1302.392037, 1302.392037, 0.000000, X, Y) && !ellipse(30440.812000, 27815.718000, 2672.656077, 2672.656077, 0.000000, X, Y) && !ellipse(26296.078000, 27685.874600, 2258.728065, 2258.728065, 0.000000, X, Y) && !ellipse(26672.665344, 26155.489532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27378.127869, 25624.364197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27942.467621, 25187.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.294400, 24375.162000, 2546.976073, 1508.984043, 292.234000, X, Y) && !ellipse(26118.324432, 25096.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.709808, 25370.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28109.434448, 24518.334747, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 21 17:42:31 2011] Writing fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src48.gif
[Wed Dec 21 19:36:21 2011] Mean detx,y = (-1603.89, 852.47) 
[Wed Dec 21 19:36:26 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 19:36:53 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 19:36:54 2011] Setting source spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Dec 21 19:36:54 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu Dec 22 23:09:05 2011] Updating aperture counts using extracted products
[Thu Dec 22 23:09:05 2011] Error reading totcts from fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Dec 22 23:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 23:09:11 2011] Using photon index=1.80, rate=0.0201, arf fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src48.arf
[Thu Dec 22 23:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 23:09:11 2011] Updating source flux to 5.9e-14
[Thu Dec 22 23:17:48 2011] Flag b found in src. 48 procflags, skipping spectral fitting
[Thu Dec 22 23:17:48 2011] Flag c found in src. 48 procflags, skipping spectral fitting