[Tue Dec 20 12:47:55 2011] Detection parameters:
  Position = (340.9, 314.0) = 6 26 11.59 -53 41 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.0 +/- 27.4
  Background counts = 241.1
  Rate = 0.01 +/- 0.002

[Tue Dec 20 12:47:57 2011] Off-axis axis estimate = 3.28'
[Tue Dec 20 12:54:00 2011] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:54:00 2011] Initial guess for spatial extent in simple fitting = 8.07"
[Tue Dec 20 12:54:00 2011] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.676
[Tue Dec 20 12:54:00 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 8.07"
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src43.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src43.csv
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src43.csv
[Tue Dec 20 17:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Dec 20 17:53:37 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Dec 21 02:11:01 2011] Spatial fit model total counts = 3630.680000, observed total counts = 3629.000000
[Wed Dec 21 02:11:01 2011] Offset between fit and detection position for source 45 = 3.400179 pixels
[Wed Dec 21 02:11:01 2011] Warning, changing simple spatial fit ID from 43 to 16
[Wed Dec 21 02:11:01 2011] 3221.338000 total counts/ 2901.690000 bgd. counts: snr = 5.933986
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 3.400179 pixels
  Position = (344.3, 313.3) = 6 26 9.96 -53 41 19.8
  Extent = 10.2 (9.0-11.3)", rotation angle = 0
  Source counts = 319.6 +/- 56.8
  Background counts = 2901.7
  Rate = 0.01 +/- 0.003
[Wed Dec 21 02:11:02 2011] Spatial fit model total counts = 2633.150000, observed total counts = 2623.000000
[Wed Dec 21 02:11:02 2011] Offset between fit and detection position for source 45 = 1.594357 pixels
[Wed Dec 21 02:11:02 2011] Warning, changing simple spatial fit ID from 16 to 40
[Wed Dec 21 02:11:02 2011] 2529.749000 total counts/ 2228.660000 bgd. counts: snr = 6.377831
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.594357 pixels
  Position = (343.1, 314.3) = 6 26 10.54 -53 41 15.2
  Extent = 16.7 (16.7-33.4)", rotation angle = 0
  Source counts = 301.1 +/- 50.3
  Background counts = 2228.7
  Rate = 0.01 +/- 0.002
[Wed Dec 21 02:11:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 02:11:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 02:11:02 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 02:11:02 2011] Source does appear to be extended
[Wed Dec 21 02:11:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 02:11:02 2011] Source is confused with source 15
[Wed Dec 21 02:12:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 02:12:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 02:12:07 2011] Initial guess for spatial extent in simple fitting = 16.70"
[Wed Dec 21 02:12:07 2011] source mask rpix=3.8, npix_max = 75, mask sum = 63, frac = 0.836
[Wed Dec 21 02:12:07 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 16.70"
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src41.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src41.csv
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src41.csv
[Wed Dec 21 11:14:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Dec 21 11:14:30 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Dec 21 17:41:44 2011] Spatial fit model total counts = 3635.980000, observed total counts = 3629.000000
[Wed Dec 21 17:41:44 2011] Offset between fit and detection position for source 45 = 1.806539 pixels
[Wed Dec 21 17:41:44 2011] Warning, changing simple spatial fit ID from 41 to 16
[Wed Dec 21 17:41:44 2011] 2438.517000 total counts/ 1938.700000 bgd. counts: snr = 11.351564
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.806539 pixels
  Position = (343.1, 312.5) = 6 26 10.54 -53 41 23.0
  Extent = 15.8 (15.2-31.7)" x 6.9 (6.2-7.6)", rotation angle = 21 (16-25) degrees
  Source counts = 499.8 +/- 49.4
  Background counts = 1938.7
  Rate = 0.02 +/- 0.002
[Wed Dec 21 17:41:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:41:44 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 17:41:44 2011] Source does appear to be extended
[Wed Dec 21 17:41:44 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.99
[Wed Dec 21 17:41:44 2011] Source is asymmetric
[Wed Dec 21 17:42:31 2011] XMMSAS src. selection expression = ellipse(29799.212000, 27142.774000, 949.644027, 411.870012, 21.410000, X, Y)
[Wed Dec 21 17:42:31 2011] Writing source region out to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src45_src.reg
[Wed Dec 21 17:42:31 2011] Extracting stamp from image fullrun_pn_xmm0505210401_pi300-10000_cl_sm2.00.img.gz, (288, 258) - (398, 367)
[Wed Dec 21 17:42:31 2011] XMMSAS bgd. selection expression = annulus(29799.212000, 27142.774000, 1582.740046, 3165.480091, X, Y) && !ellipse(28314.049600, 26869.493000, 2455.792071, 972.616028, 211.088000, X, Y) && !ellipse(27538.560669, 28349.834076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.184357, 28092.099762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.080000, 27788.688000, 714.293621, 714.293621, 0.000000, X, Y) && !ellipse(29019.976746, 27525.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.290000, 26821.906000, 1805.040052, 1805.040052, 0.000000, X, Y) && !ellipse(29436.646423, 26468.230743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29329.253143, 25972.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.186200, 27063.573800, 1127.664032, 1127.664032, 0.000000, X, Y) && !ellipse(28979.284000, 26418.216000, 1256.184036, 1256.184036, 0.000000, X, Y) && !ellipse(33248.394989, 23270.157684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.662000, 28776.236000, 983.472028, 983.472028, 0.000000, X, Y) && !ellipse(27895.452362, 29155.093842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.993400, 29024.419000, 1233.760036, 1233.760036, 0.000000, X, Y) && !ellipse(28584.166962, 28222.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.618000, 27507.606000, 1302.392037, 1302.392037, 0.000000, X, Y) && !ellipse(30440.812000, 27815.718000, 2672.656077, 2672.656077, 0.000000, X, Y) && !ellipse(26296.078000, 27685.874600, 2258.728065, 2258.728065, 0.000000, X, Y) && !ellipse(29980.892000, 27191.330000, 1336.328038, 1336.328038, 0.000000, X, Y) && !ellipse(31323.342102, 26446.047974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29791.910000, 26166.500000, 687.712020, 687.712020, 0.000000, X, Y) && !ellipse(25597.750000, 26742.687600, 1085.824031, 1085.824031, 0.000000, X, Y) && !ellipse(26672.665344, 26155.489532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33048.348000, 25537.656000, 1477.912043, 1477.912043, 0.000000, X, Y) && !ellipse(30357.994690, 25732.710632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27378.127869, 25624.364197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31328.602600, 25240.477800, 884.904025, 884.904025, 0.000000, X, Y) && !ellipse(27942.467621, 25187.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.294400, 24375.162000, 2546.976073, 1508.984043, 292.234000, X, Y) && !ellipse(26118.324432, 25096.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.709808, 25370.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28109.434448, 24518.334747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30958.270200, 24293.808000, 2246.264065, 1263.336036, 306.060100, X, Y)
[Wed Dec 21 17:42:31 2011] Writing fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src45.gif
[Wed Dec 21 19:33:47 2011] Mean detx,y = (1740.37, -1468.25) 
[Wed Dec 21 19:33:52 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 19:34:18 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 19:34:19 2011] Setting source spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed Dec 21 19:34:19 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Dec 22 23:09:05 2011] Updating aperture counts using extracted products
[Thu Dec 22 23:09:05 2011] Error reading totcts from fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Dec 22 23:09:11 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 23:09:11 2011] Using photon index=1.80, rate=0.0234, arf fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src45.arf
[Thu Dec 22 23:09:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 23:09:11 2011] Updating source flux to 7.9e-14
[Thu Dec 22 23:17:48 2011] Flag c found in src. 45 procflags, skipping spectral fitting