[Tue Dec 20 12:47:55 2011] Detection parameters:
  Position = (300.3, 316.0) = 6 26 31.51 -53 41 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.9 +/- 29.4
  Background counts = 237.2
  Rate = 0.01 +/- 0.002

[Tue Dec 20 12:47:57 2011] Off-axis axis estimate = 1.28'
[Tue Dec 20 12:54:00 2011] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:54:00 2011] Initial guess for spatial extent in simple fitting = 7.07"
[Tue Dec 20 12:54:00 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Tue Dec 20 12:54:00 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 7.07"
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src41.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src41.csv
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src41.csv
[Tue Dec 20 17:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue Dec 20 17:53:37 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Wed Dec 21 02:11:01 2011] Source 43 is offset by 4.506327 and 0.219443 pixels which is larger than
2 X fitted extent = 0.955857 x 0.955857, not incorporating fit results
[Wed Dec 21 02:11:02 2011] Warning, spatial fit 41 centroid is now closest to src. 17
[Wed Dec 21 02:11:02 2011] Source 43 is offset by -0.534386 and 8.266179 pixels which is larger than
2 X fitted extent = 0.776956 x 0.776956, not incorporating fit results
[Wed Dec 21 02:11:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 02:11:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 02:11:02 2011] Assessing source extent using major
[Wed Dec 21 02:11:02 2011] Source does appear to be extended
[Wed Dec 21 02:11:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 02:12:07 2011] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 02:12:07 2011] Initial guess for spatial extent in simple fitting = 7.07"
[Wed Dec 21 02:12:07 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Wed Dec 21 02:12:07 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 7.07"
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src39.ximg exists
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src39_1.ximg exists
[Wed Dec 21 11:14:29 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src39 appears to have run properly
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Wed Dec 21 11:14:30 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Wed Dec 21 17:41:44 2011] Spatial fit model total counts = 7407.540000, observed total counts = 7417.000000
[Wed Dec 21 17:41:44 2011] Offset between fit and detection position for source 43 = 3.820551 pixels
[Wed Dec 21 17:41:44 2011] Warning, changing simple spatial fit ID from 39 to 13
[Wed Dec 21 17:41:44 2011] 7233.580000 total counts/ 5322.990000 bgd. counts: snr = 26.187237
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.820551 pixels
  Position = (302.8, 318.8) = 6 26 30.26 -53 40 56.0
  Extent = 28.2 (21.5-31.6)", rotation angle = 0
  Source counts = 1910.6 +/- 85.1
  Background counts = 5323.0
  Rate = 0.09 +/- 0.004
[Wed Dec 21 17:41:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:41:44 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 17:41:44 2011] Source does appear to be extended
[Wed Dec 21 17:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 17:41:45 2011] Source is confused with source 17
[Wed Dec 21 17:42:31 2011] Counts = 1910.590000, rescaling region sizes by 2.000000
[Wed Dec 21 17:42:31 2011] XMMSAS src. selection expression = ellipse(26296.078000, 27685.874600, 3388.092097, 3388.092097, 0.000000, X, Y)
[Wed Dec 21 17:42:31 2011] Writing source region out to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src43_src.reg
[Wed Dec 21 17:42:31 2011] Extracting stamp from image fullrun_pn_xmm0505210401_pi300-10000_cl_sm2.00.img.gz, (108, 124) - (498, 514)
[Wed Dec 21 17:42:31 2011] XMMSAS bgd. selection expression = annulus(26296.078000, 27685.874600, 11293.640325, 22587.280650, X, Y) && !ellipse(17442.881600, 39846.369000, 544.206416, 544.206416, 0.000000, X, Y) && !ellipse(35430.855621, 36929.547974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22159.508800, 34873.632000, 766.975222, 766.975222, 0.000000, X, Y) && !ellipse(28314.049600, 26869.493000, 2455.792071, 972.616028, 211.088000, X, Y) && !ellipse(19598.946540, 25229.174400, 413.320812, 413.320812, 0.000000, X, Y) && !ellipse(21093.984161, 41064.997711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27531.439880, 43402.421783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17058.871964, 43175.881409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24353.865600, 35219.868000, 437.092013, 437.092013, 0.000000, X, Y) && !ellipse(23721.334778, 33971.749756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39141.431641, 30318.426788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.560669, 28349.834076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.184357, 28092.099762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.080000, 27788.688000, 714.293621, 714.293621, 0.000000, X, Y) && !ellipse(29019.976746, 27525.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.290000, 26821.906000, 1805.040052, 1805.040052, 0.000000, X, Y) && !ellipse(25169.057200, 27945.623740, 636.528018, 636.528018, 0.000000, X, Y) && !ellipse(29436.646423, 26468.230743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29329.253143, 25972.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.186200, 27063.573800, 1127.664032, 1127.664032, 0.000000, X, Y) && !ellipse(28979.284000, 26418.216000, 1256.184036, 1256.184036, 0.000000, X, Y) && !ellipse(33248.394989, 23270.157684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10359.056206, 21379.556458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22400.895782, 44159.556488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28041.234711, 41976.381653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28911.261261, 15440.816132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37298.302338, 31719.063599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.172200, 30191.255000, 626.621618, 626.621618, 0.000000, X, Y) && !ellipse(27320.662000, 28776.236000, 983.472028, 983.472028, 0.000000, X, Y) && !ellipse(27895.452362, 29155.093842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.993400, 29024.419000, 1233.760036, 1233.760036, 0.000000, X, Y) && !ellipse(28584.166962, 28222.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40734.998810, 28165.824615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.767639, 27783.646423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.618000, 27507.606000, 1302.392037, 1302.392037, 0.000000, X, Y) && !ellipse(30440.812000, 27815.718000, 2672.656077, 2672.656077, 0.000000, X, Y) && !ellipse(29980.892000, 27191.330000, 1336.328038, 1336.328038, 0.000000, X, Y) && !ellipse(29799.212000, 27142.774000, 1266.192036, 549.160016, 21.410000, X, Y) && !ellipse(31323.342102, 26446.047974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29791.910000, 26166.500000, 687.712020, 687.712020, 0.000000, X, Y) && !ellipse(25597.750000, 26742.687600, 1085.824031, 1085.824031, 0.000000, X, Y) && !ellipse(26672.665344, 26155.489532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33048.348000, 25537.656000, 1477.912043, 1477.912043, 0.000000, X, Y) && !ellipse(30357.994690, 25732.710632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27378.127869, 25624.364197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31328.602600, 25240.477800, 884.904025, 884.904025, 0.000000, X, Y) && !ellipse(27942.467621, 25187.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.294400, 24375.162000, 2546.976073, 1508.984043, 292.234000, X, Y) && !ellipse(26118.324432, 25096.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.709808, 25370.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28109.434448, 24518.334747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30958.270200, 24293.808000, 2246.264065, 1263.336036, 306.060100, X, Y) && !ellipse(29068.273600, 20183.537800, 359.044810, 359.044810, 0.000000, X, Y) && !ellipse(38568.471008, 20482.614548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35830.232400, 15448.352600, 746.064821, 402.332812, 342.861280, X, Y)
[Wed Dec 21 17:42:31 2011] Writing fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src43.gif
[Wed Dec 21 19:11:46 2011] Mean detx,y = (-991.52, -118.79) 
[Wed Dec 21 19:11:57 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 19:32:24 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 19:32:25 2011] Setting source spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Dec 21 19:32:25 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu Dec 22 23:09:05 2011] Updating aperture counts using extracted products
[Thu Dec 22 23:09:05 2011] Error reading totcts from fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Dec 22 23:09:10 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 23:09:10 2011] Using photon index=1.80, rate=0.0893, arf fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src43.arf
[Thu Dec 22 23:09:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 23:09:11 2011] Updating source flux to 2.1e-13
[Thu Dec 22 23:17:48 2011] Flag b found in src. 43 procflags, skipping spectral fitting
[Thu Dec 22 23:17:48 2011] Flag c found in src. 43 procflags, skipping spectral fitting