[Tue Dec 20 12:47:55 2011] Detection parameters:
  Position = (312.2, 331.0) = 6 26 25.65 -53 40 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.8 +/- 26.1
  Background counts = 225.4
  Rate = 0.01 +/- 0.002

[Tue Dec 20 12:47:57 2011] Off-axis axis estimate = 2.56'
[Tue Dec 20 12:54:00 2011] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 12:54:00 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Dec 20 12:54:00 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.968
[Tue Dec 20 12:54:00 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 7.71"
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src35.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src35.csv
[Tue Dec 20 17:53:36 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Dec 20 17:53:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src35.csv
[Tue Dec 20 17:53:36 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Dec 20 17:53:37 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Dec 20 17:53:37 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed Dec 21 02:11:02 2011] Spatial fit model total counts = 2466.470000, observed total counts = 2473.000000
[Wed Dec 21 02:11:02 2011] Offset between fit and detection position for source 37 = 3.142439 pixels
[Wed Dec 21 02:11:02 2011] Warning, changing simple spatial fit ID from 35 to 32
[Wed Dec 21 02:11:02 2011] 2300.162000 total counts/ 1719.590000 bgd. counts: snr = 14.000503
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 3.142439 pixels
  Position = (310.6, 333.7) = 6 26 26.45 -53 39 51.1
  Extent = 15.8 (15.8-31.7)", rotation angle = 0
  Source counts = 580.6 +/- 48.0
  Background counts = 1719.6
  Rate = 0.03 +/- 0.002
[Wed Dec 21 02:11:02 2011] Spatial fit model total counts = 2332.600000, observed total counts = 2339.000000
[Wed Dec 21 02:11:02 2011] Offset between fit and detection position for source 37 = 0.486204 pixels
[Wed Dec 21 02:11:02 2011] Warning, changing simple spatial fit ID from 32 to 35
[Wed Dec 21 02:11:02 2011] 2095.901000 total counts/ 1130.760000 bgd. counts: snr = 28.701563
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.486204 pixels
  Position = (310.7, 334.2) = 6 26 26.40 -53 39 49.0
  Extent = 15.4 (15.4-30.8)", rotation angle = 0
  Source counts = 965.1 +/- 45.8
  Background counts = 1130.8
  Rate = 0.05 +/- 0.002
[Wed Dec 21 02:11:02 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 02:11:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 02:11:02 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 02:11:02 2011] Source does appear to be extended
[Wed Dec 21 02:11:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 02:11:02 2011] Source is confused with source 12
[Wed Dec 21 02:12:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 02:12:07 2011] Initial guess for spatial extent in simple fitting = 15.42"
[Wed Dec 21 02:12:07 2011] source mask rpix=3.5, npix_max = 65, mask sum = 62, frac = 0.947
[Wed Dec 21 02:12:07 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 15.42"
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src33.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src33.csv
[Wed Dec 21 11:14:29 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Dec 21 11:14:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src33.csv
[Wed Dec 21 11:14:29 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Dec 21 11:14:30 2011] fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Dec 21 11:14:30 2011] Fit fullrun_pn_xmm0505210401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Dec 21 17:41:44 2011] Warning, spatial fit 33 centroid is now closest to src. 36
[Wed Dec 21 17:41:44 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:41:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:41:44 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 17:41:44 2011] Source does appear to be extended
[Wed Dec 21 17:41:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 17:42:30 2011] XMMSAS src. selection expression = ellipse(26981.993400, 29024.419000, 925.320027, 925.320027, 0.000000, X, Y)
[Wed Dec 21 17:42:30 2011] Writing source region out to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src37_src.reg
[Wed Dec 21 17:42:30 2011] Extracting stamp from image fullrun_pn_xmm0505210401_pi300-10000_cl_sm2.00.img.gz, (258, 281) - (364, 387)
[Wed Dec 21 17:42:30 2011] XMMSAS bgd. selection expression = annulus(26981.993400, 29024.419000, 1542.200044, 3084.400089, X, Y) && !ellipse(28314.049600, 26869.493000, 2455.792071, 972.616028, 211.088000, X, Y) && !ellipse(27538.560669, 28349.834076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.184357, 28092.099762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.080000, 27788.688000, 714.293621, 714.293621, 0.000000, X, Y) && !ellipse(29019.976746, 27525.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28088.290000, 26821.906000, 1805.040052, 1805.040052, 0.000000, X, Y) && !ellipse(25169.057200, 27945.623740, 636.528018, 636.528018, 0.000000, X, Y) && !ellipse(29436.646423, 26468.230743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29329.253143, 25972.873962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.186200, 27063.573800, 1127.664032, 1127.664032, 0.000000, X, Y) && !ellipse(28979.284000, 26418.216000, 1256.184036, 1256.184036, 0.000000, X, Y) && !ellipse(24464.172200, 30191.255000, 626.621618, 626.621618, 0.000000, X, Y) && !ellipse(27320.662000, 28776.236000, 983.472028, 983.472028, 0.000000, X, Y) && !ellipse(27895.452362, 29155.093842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28584.166962, 28222.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.767639, 27783.646423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29411.618000, 27507.606000, 1302.392037, 1302.392037, 0.000000, X, Y) && !ellipse(30440.812000, 27815.718000, 2672.656077, 2672.656077, 0.000000, X, Y) && !ellipse(26296.078000, 27685.874600, 2258.728065, 2258.728065, 0.000000, X, Y) && !ellipse(29980.892000, 27191.330000, 1336.328038, 1336.328038, 0.000000, X, Y) && !ellipse(29799.212000, 27142.774000, 1266.192036, 549.160016, 21.410000, X, Y) && !ellipse(29791.910000, 26166.500000, 687.712020, 687.712020, 0.000000, X, Y) && !ellipse(25597.750000, 26742.687600, 1085.824031, 1085.824031, 0.000000, X, Y) && !ellipse(26672.665344, 26155.489532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30357.994690, 25732.710632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27378.127869, 25624.364197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27942.467621, 25187.805695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.294400, 24375.162000, 2546.976073, 1508.984043, 292.234000, X, Y) && !ellipse(26118.324432, 25096.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28720.709808, 25370.179657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30958.270200, 24293.808000, 2246.264065, 1263.336036, 306.060100, X, Y)
[Wed Dec 21 17:42:30 2011] Writing fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src37.gif
[Wed Dec 21 18:51:11 2011] Mean detx,y = (-1418.30, -1799.31) 
[Wed Dec 21 18:51:16 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 18:52:04 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 18:52:05 2011] Setting source spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Wed Dec 21 18:52:05 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Thu Dec 22 23:09:05 2011] Updating aperture counts using extracted products
[Thu Dec 22 23:09:05 2011] Error reading totcts from fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Dec 22 23:09:10 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 23:09:10 2011] Using photon index=1.80, rate=0.0451, arf fullrun_pn_xmm0505210401_pi300-10000_pass1_cl_src37.arf
[Thu Dec 22 23:09:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 23:09:10 2011] Updating source flux to 1.3e-13
[Thu Dec 22 23:17:48 2011] Flag c found in src. 37 procflags, skipping spectral fitting