[Thu Mar 15 19:23:22 2012] Detection parameters:
  Position = (329.1, 324.1) = 23 44 53.04 9 12 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.9 +/- 21.4
  Background counts = 156.1
  Rate = 0.006 +/- 0.001

[Thu Mar 15 19:23:23 2012] Off-axis axis estimate = 2.90'
[Thu Mar 15 20:34:52 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 20:34:52 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Thu Mar 15 20:34:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.749
[Thu Mar 15 20:34:52 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.88"
[Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src16.ximg exists
[Thu Mar 15 21:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src16.csv
[Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Mar 15 21:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src16.csv
[Thu Mar 15 21:50:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Mar 15 21:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Mar 15 21:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu Mar 15 21:50:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 21:50:28 2012] Warning, spatial fit 16 centroid is now closest to src. 10
[Thu Mar 15 21:50:28 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 21:50:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 21:50:28 2012] Assessing source extent using major
[Thu Mar 15 21:50:28 2012] Source does appear to be extended
[Thu Mar 15 21:50:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:59:27 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:59:27 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Thu Mar 15 22:59:27 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.749
[Thu Mar 15 22:59:27 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.88"
[Fri Mar 16 00:14:09 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_src16.ximg exists
[Fri Mar 16 00:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_src16.csv
[Fri Mar 16 00:14:09 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Mar 16 00:14:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_src16.csv
[Fri Mar 16 00:14:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 00:14:10 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Mar 16 00:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Mar 16 00:14:10 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Mar 16 00:14:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri Mar 16 00:14:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 00:14:20 2012] Warning, spatial fit 16 centroid is now closest to src. 10
[Fri Mar 16 00:14:20 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 00:14:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 00:14:20 2012] Assessing source extent using major
[Fri Mar 16 00:14:20 2012] Source does appear to be extended
[Fri Mar 16 00:14:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 00:49:20 2012] XMMSAS src. selection expression = ellipse(28584.124481, 28145.805695, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 00:49:20 2012] Writing source region out to fullrun_mos2_xmm0505210301_pi300-10000_pass1_cl_src7_src.reg
[Fri Mar 16 00:49:20 2012] Extracting stamp from image fullrun_mos2_xmm0505210301_pi300-10000_cl_sm2.00.img.gz, (292, 287) - (367, 362)
[Fri Mar 16 00:49:20 2012] XMMSAS bgd. selection expression = annulus(28584.124481, 28145.805695, 1087.500000, 2175.000000, X, Y) && !ellipse(26910.364000, 26508.922000, 2291.216066, 2291.216066, 0.000000, X, Y) && !ellipse(28247.286224, 27109.016754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27165.599000, 26728.730040, 1203.208035, 1203.208035, 45.407400, X, Y) && !ellipse(28488.960266, 26132.374847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27468.032471, 27255.407104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28004.327148, 25517.478027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28844.078400, 26917.477631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29157.817902, 27688.917633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29253.077698, 26404.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29507.193207, 26835.880615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26561.096000, 27131.080000, 1145.608033, 1145.608033, 0.000000, X, Y) && !ellipse(26735.844000, 27501.348000, 868.456025, 868.456025, 0.000000, X, Y) && !ellipse(27638.714000, 28274.068000, 1249.416036, 1249.416036, 0.000000, X, Y) && !ellipse(27178.217438, 27949.445038, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 00:49:20 2012] Writing fullrun_mos2_xmm0505210301_pi300-10000_pass1_cl_src7.gif
[Fri Mar 16 00:52:22 2012] Mean detx,y = (-105.94, 1519.82) 
[Fri Mar 16 00:52:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 00:52:32 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 00:52:32 2012] Setting source spectrum file to fullrun_mos2_xmm0505210301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Mar 16 00:52:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505210301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Mar 16 01:06:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 01:06:13 2012] rmf not generated due to insufficient counts
[Fri Mar 16 01:07:15 2012] Updating aperture counts using extracted products
[Fri Mar 16 01:07:15 2012] Error reading totcts from fullrun_mos2_xmm0505210301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Mar 16 01:07:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 01:07:15 2012] Using photon index=1.80, rate=0.00623, arf fullrun_mos2_xmm0505210301_pi300-10000_pass1_cl_src7.arf
[Fri Mar 16 01:07:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 01:07:15 2012] Updating source flux to 6.3e-14
[Fri Mar 16 01:07:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting