[Thu Mar 15 19:23:23 2012] Detection parameters: Position = (337.1, 298.0) = 23 44 50.69 9 10 52.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 109.5 +/- 21.3 Background counts = 154.9 Rate = 0.006 +/- 0.001 [Thu Mar 15 19:23:23 2012] Off-axis axis estimate = 2.80' [Thu Mar 15 20:34:52 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting [Thu Mar 15 20:34:52 2012] Initial guess for spatial extent in simple fitting = 7.83" [Thu Mar 15 20:34:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.756 [Thu Mar 15 20:34:52 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.83" [Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src17.ximg exists [Thu Mar 15 21:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src17.csv [Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src17_1.ximg exists [Thu Mar 15 21:50:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src17.csv [Thu Mar 15 21:50:18 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Thu Mar 15 21:50:18 2012] fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Thu Mar 15 21:50:19 2012] Fit fullrun_mos2_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly [Thu Mar 15 21:50:28 2012] Spatial fit model total counts = 502.003000, observed total counts = 498.000000 [Thu Mar 15 21:50:28 2012] Offset between fit and detection position for source 18 = 0.762746 pixels [Thu Mar 15 21:50:28 2012] Warning, changing simple spatial fit ID from 17 to 11 [Thu Mar 15 21:50:28 2012] 477.287070 total counts/ 467.924000 bgd. counts: snr = 0.432843 Spatial fit parameters: Offset between fit and detection position for source 18 = 0.762746 pixels Position = (336.9, 298.7) = 23 44 50.74 9 10 54.2 Extent = 2.0" x 2.0", rotation angle = 0 Source counts = 9.4 +/- 21.8 Background counts = 467.9 Rate = 0.002 +/- 0.006 Deleting source due to low Poisson probability