[Thu Mar 15 19:23:01 2012] Detection parameters:
  Position = (336.2, 314.1) = 23 44 50.96 9 12 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.2 +/- 22.4
  Background counts = 144.9
  Rate = 0.006 +/- 0.001

[Thu Mar 15 19:23:01 2012] Off-axis axis estimate = 2.96'
[Thu Mar 15 19:30:07 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 19:30:07 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Thu Mar 15 19:30:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Thu Mar 15 19:30:07 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.91"
[Thu Mar 15 20:34:51 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src18.ximg exists
[Thu Mar 15 20:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src18.csv
[Thu Mar 15 20:34:51 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Mar 15 20:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src18.csv
[Thu Mar 15 20:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:34:52 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Mar 15 20:34:52 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Mar 15 20:34:52 2012] Fit fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Mar 15 21:50:24 2012] Source 12 is offset by 5.094261 and -3.838768 pixels which is larger than
2 X fitted extent = 1.114506 x 1.114506, not incorporating fit results
[Thu Mar 15 21:50:24 2012] Source 12 is offset by 2.474227 and 4.270175 pixels which is larger than
2 X fitted extent = 1.881324 x 1.881324, not incorporating fit results
[Thu Mar 15 21:50:24 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 21:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 21:50:24 2012] Assessing source extent using major
[Thu Mar 15 21:50:24 2012] Source does appear to be extended
[Thu Mar 15 21:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 21:50:24 2012] Source is confused with source 16
[Thu Mar 15 21:57:33 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 21:57:33 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Thu Mar 15 21:57:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Thu Mar 15 21:57:33 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.91"
[Thu Mar 15 22:59:27 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src17.ximg exists
[Thu Mar 15 22:59:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src17.csv
[Thu Mar 15 22:59:27 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Mar 15 22:59:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src17.csv
[Thu Mar 15 22:59:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:59:27 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Mar 15 22:59:27 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Mar 15 22:59:27 2012] Fit fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Mar 16 00:14:15 2012] Source 12 is offset by 3.233158 and 3.704614 pixels which is larger than
2 X fitted extent = 0.868129 x 0.868129, not incorporating fit results
[Fri Mar 16 00:14:15 2012] Source 12 is offset by 5.045939 and -4.441090 pixels which is larger than
2 X fitted extent = 0.909140 x 0.909140, not incorporating fit results
[Fri Mar 16 00:14:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 00:14:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 00:14:15 2012] Assessing source extent using major
[Fri Mar 16 00:14:15 2012] Source does appear to be extended
[Fri Mar 16 00:14:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 00:15:27 2012] XMMSAS src. selection expression = ellipse(29199.002716, 27276.225189, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 00:15:27 2012] Writing source region out to fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src12_src.reg
[Fri Mar 16 00:15:27 2012] Extracting stamp from image fullrun_mos1_xmm0505210301_pi300-10000_cl_sm2.00.img.gz, (299, 277) - (374, 352)
[Fri Mar 16 00:15:27 2012] XMMSAS bgd. selection expression = annulus(29199.002716, 27276.225189, 1087.500000, 2175.000000, X, Y) && !ellipse(27227.644000, 26279.388000, 2123.008061, 2123.008061, 0.000000, X, Y) && !ellipse(26929.614000, 26495.254000, 1061.504031, 1061.504031, 0.000000, X, Y) && !ellipse(28053.777069, 26399.624786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27966.086761, 27084.778992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29619.266000, 26789.710000, 1300.136037, 1300.136037, 0.000000, X, Y) && !ellipse(28379.634125, 27014.107422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27801.328918, 27783.967682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28451.670000, 25652.512000, 1212.928035, 1212.928035, 0.000000, X, Y) && !ellipse(26251.261749, 26746.525604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27123.051239, 27698.327057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.901459, 25890.610535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29922.997345, 27223.982178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28676.012390, 28436.276520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26258.636800, 27829.640000, 1174.600034, 1174.600034, 0.000000, X, Y)
[Fri Mar 16 00:15:27 2012] Writing fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src12.gif
[Fri Mar 16 00:18:25 2012] Mean detx,y = (1220.78, 974.92) 
[Fri Mar 16 00:18:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 00:18:33 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 00:18:34 2012] Setting source spectrum file to fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Mar 16 00:18:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Mar 16 00:49:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 00:49:08 2012] rmf not generated due to insufficient counts
[Fri Mar 16 01:07:14 2012] Updating aperture counts using extracted products
[Fri Mar 16 01:07:14 2012] Error reading totcts from fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Mar 16 01:07:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 01:07:14 2012] Using photon index=1.80, rate=0.00597, arf fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src12.arf
[Fri Mar 16 01:07:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 01:07:14 2012] Updating source flux to 5.8e-14
[Fri Mar 16 01:07:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting