[Thu Mar 15 19:23:01 2012] Detection parameters:
  Position = (426.6, 284.2) = 23 44 24.41 9 9 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 917.0 +/- 39.3
  Background counts = 84.6
  Rate = 0.06 +/- 0.003

[Thu Mar 15 19:23:01 2012] Off-axis axis estimate = 9.35'
[Thu Mar 15 19:30:07 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 19:30:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 19:30:07 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Thu Mar 15 19:30:07 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Thu Mar 15 19:30:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.10"
[Thu Mar 15 20:34:51 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 20:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 20:34:51 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 20:34:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 20:34:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 20:34:51 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 20:34:51 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 20:34:51 2012] Fit fullrun_mos1_xmm0505210301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 15 21:50:24 2012] Spatial fit model total counts = 475.834000, observed total counts = 467.000000
[Thu Mar 15 21:50:24 2012] Offset between fit and detection position for source 1 = 0.359898 pixels
[Thu Mar 15 21:50:24 2012] 475.807000 total counts/ 224.286000 bgd. counts: snr = 16.794735
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.359898 pixels
  Position = (426.2, 284.0) = 23 44 24.51 9 9 50.2
  Extent = 6.0 (5.4-6.9)", rotation angle = 0
  Source counts = 251.5 +/- 21.8
  Background counts = 224.3
  Rate = 0.05 +/- 0.004
[Thu Mar 15 21:50:24 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 21:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 21:50:24 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 21:50:24 2012] Source does appear to be extended
[Thu Mar 15 21:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 21:57:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 21:57:33 2012] Initial guess for spatial extent in simple fitting = 6.01"
[Thu Mar 15 21:57:33 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.130
[Thu Mar 15 21:57:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.01"
[Thu Mar 15 22:59:26 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 15 22:59:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 22:59:26 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 15 22:59:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 22:59:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:59:27 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 15 22:59:27 2012] fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 15 22:59:27 2012] Fit fullrun_mos1_xmm0505210301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 00:14:15 2012] Spatial fit model total counts = 418.389000, observed total counts = 416.000000
[Fri Mar 16 00:14:15 2012] Offset between fit and detection position for source 1 = 0.015503 pixels
[Fri Mar 16 00:14:15 2012] 419.513000 total counts/ 179.152000 bgd. counts: snr = 17.957802
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015503 pixels
  Position = (426.3, 284.0) = 23 44 24.50 9 9 50.2
  Extent = 5.7 (5.1-6.5)", rotation angle = 0
  Source counts = 240.4 +/- 20.5
  Background counts = 179.2
  Rate = 0.05 +/- 0.004
[Fri Mar 16 00:14:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 00:14:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 00:14:15 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 00:14:15 2012] Source does appear to be extended
[Fri Mar 16 00:14:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 00:15:27 2012] XMMSAS src. selection expression = ellipse(37036.491800, 24663.693000, 344.683810, 344.683810, 0.000000, X, Y)
[Fri Mar 16 00:15:27 2012] Writing source region out to fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 00:15:27 2012] Extracting stamp from image fullrun_mos1_xmm0505210301_pi300-10000_cl_sm2.00.img.gz, (406, 264) - (446, 304)
[Fri Mar 16 00:15:27 2012] XMMSAS bgd. selection expression = annulus(37036.491800, 24663.693000, 574.473017, 1148.946033, X, Y)
[Fri Mar 16 00:15:27 2012] Writing fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 00:15:29 2012] Mean detx,y = (2513.72, 9141.29) 
[Fri Mar 16 00:15:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 00:15:36 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 00:15:36 2012] Setting source spectrum file to fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 00:15:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 01:07:13 2012] Updating aperture counts using extracted products
[Fri Mar 16 01:07:13 2012] Error reading totcts from fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 01:07:14 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 01:07:14 2012] Using photon index=1.80, rate=0.0452, arf fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 01:07:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 01:07:14 2012] Updating source flux to 7.9e-13
[Fri Mar 16 01:07:32 2012] Reading fit data from xmm0505210301/analysis//spectral/fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 16 01:07:32 2012] Spectral fit parameter nH value = 1.29976e+21
[Fri Mar 16 01:07:32 2012] Spectral fit parameter PhoIndex value = 1.81
[Fri Mar 16 01:07:32 2012] Failed to get F(0.3-8.0) from xmm0505210301/analysis//spectral/fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 01:07:32 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 01:07:32 2012] Using Nh = 1.3e+21, photon index=1.81, rate=0.0452, arf fullrun_mos1_xmm0505210301_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 01:07:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 01:07:32 2012] Updating source flux to 9e-13