[Sun Jan  1 19:08:47 2012] Detection parameters:
  Position = (159.2, 307.1) = 17 14 34.78 -23 20 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.0 +/- 21.1
  Background counts = 102.4
  Rate = 0.008 +/- 0.0008

[Sun Jan  1 19:08:47 2012] Off-axis axis estimate = 10.12'
[Sun Jan  1 19:14:20 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 19:14:20 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sun Jan  1 19:14:20 2012] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.786
[Sun Jan  1 19:14:20 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.49"
[Sun Jan  1 20:49:11 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jan  1 20:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_src10.csv
[Sun Jan  1 20:49:11 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jan  1 20:49:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_src10.csv
[Sun Jan  1 20:49:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 20:49:11 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jan  1 20:49:11 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jan  1 20:49:11 2012] Fit fullrun_pn_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jan  2 01:13:37 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.447148 pixels away
[Mon Jan  2 01:13:37 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 01:13:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 01:13:37 2012] Assessing source extent using major
[Mon Jan  2 01:13:37 2012] Source does appear to be extended
[Mon Jan  2 01:13:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 01:14:04 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 01:14:04 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Mon Jan  2 01:14:04 2012] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.786
[Mon Jan  2 01:14:04 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.49"
[Mon Jan  2 03:17:16 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jan  2 03:17:16 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jan  2 03:17:16 2012] Fit fullrun_pn_xmm0505150501_pi300-10000_cl_pass1_src9 appears to have run properly
[Mon Jan  2 03:17:16 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jan  2 03:17:16 2012] fullrun_pn_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jan  2 03:17:16 2012] Fit fullrun_pn_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jan  2 08:51:29 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.256924 pixels away
[Mon Jan  2 08:51:29 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 08:51:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 08:51:29 2012] Assessing source extent using major
[Mon Jan  2 08:51:29 2012] Source does appear to be extended
[Mon Jan  2 08:51:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 08:51:55 2012] XMMSAS src. selection expression = ellipse(13799.994751, 26671.489166, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan  2 08:51:55 2012] Writing source region out to fullrun_pn_xmm0505150501_pi300-10000_pass1_cl_src10_src.reg
[Mon Jan  2 08:51:55 2012] Extracting stamp from image fullrun_pn_xmm0505150501_pi300-10000_cl_sm2.00.img.gz, (122, 270) - (197, 345)
[Mon Jan  2 08:51:55 2012] XMMSAS bgd. selection expression = annulus(13799.994751, 26671.489166, 1087.500000, 2175.000000, X, Y)
[Mon Jan  2 08:51:55 2012] Writing fullrun_pn_xmm0505150501_pi300-10000_pass1_cl_src10.gif
[Mon Jan  2 08:57:37 2012] Mean detx,y = (10888.98, 3191.95) 
[Mon Jan  2 08:57:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 08:58:02 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 08:58:03 2012] Setting source spectrum file to fullrun_pn_xmm0505150501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 08:58:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jan  2 09:10:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 09:10:19 2012] rmf not generated due to insufficient counts
[Mon Jan  2 11:23:38 2012] Updating aperture counts using extracted products
[Mon Jan  2 11:23:38 2012] Error reading totcts from fullrun_pn_xmm0505150501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 11:23:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 11:23:40 2012] Using photon index=1.80, rate=0.00814, arf fullrun_pn_xmm0505150501_pi300-10000_pass1_cl_src10.arf
[Mon Jan  2 11:23:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 11:23:40 2012] Updating source flux to 3.8e-14
[Mon Jan  2 11:30:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting