[Sun Jan  1 19:10:01 2012] Detection parameters:
  Position = (159.3, 307.0) = 17 14 34.75 -23 20 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.7 +/- 15.7
  Background counts = 48.9
  Rate = 0.006 +/- 0.0009

[Sun Jan  1 19:10:01 2012] Off-axis axis estimate = 10.11'
[Sun Jan  1 23:15:15 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 23:15:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 23:15:15 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Sun Jan  1 23:15:15 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Sun Jan  1 23:15:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.48"
[Mon Jan  2 01:13:30 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jan  2 01:13:30 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jan  2 01:13:30 2012] Fit fullrun_mos2_xmm0505150501_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Jan  2 01:13:30 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jan  2 01:13:30 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jan  2 01:13:30 2012] Fit fullrun_mos2_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jan  2 01:13:51 2012] Spatial fit model total counts = 651.679000, observed total counts = 652.000000
[Mon Jan  2 01:13:51 2012] Offset between fit and detection position for source 10 = 0.513758 pixels
[Mon Jan  2 01:13:51 2012] 648.620300 total counts/ 577.927000 bgd. counts: snr = 2.940639
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.513758 pixels
  Position = (159.7, 306.7) = 17 14 34.62 -23 20 12.7
  Extent = 7.2 (5.0-9.5)", rotation angle = 0
  Source counts = 70.7 +/- 25.5
  Background counts = 577.9
  Rate = 0.003 +/- 0.001
[Mon Jan  2 01:13:51 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 01:13:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 01:13:51 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 01:13:51 2012] Source does appear to be extended
[Mon Jan  2 01:13:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 07:11:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan  2 07:11:36 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Mon Jan  2 07:11:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Mon Jan  2 07:11:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.21"
[Mon Jan  2 08:51:22 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jan  2 08:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_src1.csv
[Mon Jan  2 08:51:22 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jan  2 08:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_src1.csv
[Mon Jan  2 08:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan  2 08:51:22 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jan  2 08:51:22 2012] fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jan  2 08:51:22 2012] Fit fullrun_mos2_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jan  2 08:51:43 2012] Spatial fit model total counts = 397.000000, observed total counts = 397.000000
[Mon Jan  2 08:51:43 2012] Offset between fit and detection position for source 10 = 0.181446 pixels
[Mon Jan  2 08:51:43 2012] 394.037000 total counts/ 325.024000 bgd. counts: snr = 3.828011
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.181446 pixels
  Position = (159.6, 306.9) = 17 14 34.65 -23 20 12.0
  Extent = 6.9 (4.9-9.7)", rotation angle = 0
  Source counts = 69.0 +/- 19.9
  Background counts = 325.0
  Rate = 0.003 +/- 0.0008
[Mon Jan  2 08:51:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 08:51:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 08:51:43 2012] Assessing source extent using major axis lower bound
[Mon Jan  2 08:51:43 2012] Source does appear to be extended
[Mon Jan  2 08:51:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 10:26:53 2012] XMMSAS src. selection expression = ellipse(13837.786000, 26649.081800, 412.527012, 412.527012, 0.000000, X, Y)
[Mon Jan  2 10:26:53 2012] Writing source region out to fullrun_mos2_xmm0505150501_pi300-10000_pass1_cl_src10_src.reg
[Mon Jan  2 10:26:53 2012] Extracting stamp from image fullrun_mos2_xmm0505150501_pi300-10000_cl_sm2.00.img.gz, (136, 283) - (183, 331)
[Mon Jan  2 10:26:53 2012] XMMSAS bgd. selection expression = annulus(13837.786000, 26649.081800, 687.545020, 1375.090040, X, Y)
[Mon Jan  2 10:26:53 2012] Writing fullrun_mos2_xmm0505150501_pi300-10000_pass1_cl_src10.gif
[Mon Jan  2 10:26:59 2012] Mean detx,y = (-10784.71, -3218.34) 
[Mon Jan  2 10:27:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 10:27:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 10:27:15 2012] Setting source spectrum file to fullrun_mos2_xmm0505150501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 10:27:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jan  2 10:50:24 2012] Not generating rmf since there are only 69 counts
[Mon Jan  2 10:50:24 2012] rmf not generated due to insufficient counts
[Mon Jan  2 11:23:42 2012] Updating aperture counts using extracted products
[Mon Jan  2 11:23:42 2012] Error reading totcts from fullrun_mos2_xmm0505150501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jan  2 11:23:43 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 11:23:43 2012] Using photon index=1.80, rate=0.0027, arf fullrun_mos2_xmm0505150501_pi300-10000_pass1_cl_src10.arf
[Mon Jan  2 11:23:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 11:23:43 2012] Updating source flux to 5.5e-14
[Mon Jan  2 11:27:36 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan  2 11:30:14 2012] xmm0505150501/analysis//spectral/fullrun_mos2_xmm0505150501_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete