[Sun Jan  1 19:09:23 2012] Detection parameters:
  Position = (159.2, 307.1) = 17 14 34.78 -23 20 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.7 +/- 15.0
  Background counts = 56.3
  Rate = 0.005 +/- 0.0009

[Sun Jan  1 19:09:23 2012] Off-axis axis estimate = 10.12'
[Sun Jan  1 20:49:11 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 20:49:11 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sun Jan  1 20:49:11 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Sun Jan  1 20:49:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.49"
[Sun Jan  1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jan  1 23:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src3.csv
[Sun Jan  1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jan  1 23:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src3.csv
[Sun Jan  1 23:15:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jan  1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jan  1 23:15:14 2012] Fit fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jan  2 01:13:45 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.966822 pixels away
[Mon Jan  2 01:13:46 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 01:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 01:13:46 2012] Assessing source extent using major
[Mon Jan  2 01:13:46 2012] Source does appear to be extended
[Mon Jan  2 01:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 03:17:16 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 03:17:16 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Mon Jan  2 03:17:16 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Mon Jan  2 03:17:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.49"
[Mon Jan  2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jan  2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jan  2 07:11:35 2012] Fit fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Jan  2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jan  2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jan  2 07:11:35 2012] Fit fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jan  2 08:51:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.324030 pixels away
[Mon Jan  2 08:51:37 2012] Vigneting correction estimate = 1.000000
[Mon Jan  2 08:51:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan  2 08:51:37 2012] Assessing source extent using major
[Mon Jan  2 08:51:37 2012] Source does appear to be extended
[Mon Jan  2 08:51:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 09:18:46 2012] XMMSAS src. selection expression = ellipse(13800.698334, 26665.937500, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan  2 09:18:46 2012] Writing source region out to fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src22_src.reg
[Mon Jan  2 09:18:46 2012] Extracting stamp from image fullrun_mos1_xmm0505150501_pi300-10000_cl_sm2.00.img.gz, (122, 270) - (197, 345)
[Mon Jan  2 09:18:47 2012] XMMSAS bgd. selection expression = annulus(13800.698334, 26665.937500, 1087.500000, 2175.000000, X, Y)
[Mon Jan  2 09:18:47 2012] Writing fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src22.gif
[Mon Jan  2 09:19:48 2012] Mean detx,y = (-3078.19, 10630.01) 
[Mon Jan  2 09:19:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 09:20:01 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 09:20:01 2012] Setting source spectrum file to fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Jan  2 09:20:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Jan  2 09:45:45 2012] Not generating rmf since there are only 79 counts
[Mon Jan  2 09:45:45 2012] rmf not generated due to insufficient counts
[Mon Jan  2 11:23:40 2012] Updating aperture counts using extracted products
[Mon Jan  2 11:23:40 2012] Error reading totcts from fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Jan  2 11:23:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan  2 11:23:41 2012] Using photon index=1.80, rate=0.00487, arf fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src22.arf
[Mon Jan  2 11:23:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan  2 11:23:41 2012] Updating source flux to 7.7e-14
[Mon Jan  2 11:23:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting