[Sun Jan 1 19:09:22 2012] Detection parameters: Position = (482.7, 266.0) = 17 12 52.58 -23 23 12.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 133.5 +/- 18.8 Background counts = 58.0 Rate = 0.005 +/- 0.0006 [Sun Jan 1 19:09:23 2012] Off-axis axis estimate = 13.56' [Sun Jan 1 20:49:11 2012] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting [Sun Jan 1 20:49:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jan 1 20:49:11 2012] Initial guess for spatial extent in simple fitting = 13.21" [Sun Jan 1 20:49:11 2012] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.119 [Sun Jan 1 20:49:11 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.21" [Sun Jan 1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src4.ximg exists [Sun Jan 1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src4_1.ximg exists [Sun Jan 1 23:15:14 2012] Fit fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_src4 appears to have run properly [Sun Jan 1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Sun Jan 1 23:15:14 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Sun Jan 1 23:15:14 2012] Fit fullrun_mos1_xmm0505150501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Mon Jan 2 01:13:45 2012] Warning, spatial fit 4 centroid is now closest to src. 14 [Mon Jan 2 01:13:45 2012] Source 2 is offset by 1.871981 and -0.828550 pixels which is larger than 2 X fitted extent = 1.476345 x 1.476345, not incorporating fit results [Mon Jan 2 01:13:46 2012] Vigneting correction estimate = 1.000000 [Mon Jan 2 01:13:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 2 01:13:46 2012] Assessing source extent using major [Mon Jan 2 01:13:46 2012] Source does appear to be extended [Mon Jan 2 01:13:46 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 2 01:13:46 2012] Source is confused with source 3 [Mon Jan 2 01:13:46 2012] Source is confused with source 12 [Mon Jan 2 01:13:46 2012] Source is confused with source 11 [Mon Jan 2 03:17:16 2012] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting [Mon Jan 2 03:17:16 2012] Initial guess for spatial extent in simple fitting = 13.21" [Mon Jan 2 03:17:16 2012] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.119 [Mon Jan 2 03:17:16 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.21" [Mon Jan 2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src4.ximg exists [Mon Jan 2 07:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src4.csv [Mon Jan 2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src4_1.ximg exists [Mon Jan 2 07:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src4.csv [Mon Jan 2 07:11:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Mon Jan 2 07:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src4.csv [Mon Jan 2 07:11:35 2012] fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Mon Jan 2 07:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src4.csv [Mon Jan 2 07:11:36 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0505150501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Jan 2 08:51:37 2012] Spatial fit model total counts = 768.520000, observed total counts = 908.000000 [Mon Jan 2 08:51:37 2012] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Mon Jan 2 08:51:37 2012] Vigneting correction estimate = 1.000000 [Mon Jan 2 08:51:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 2 08:51:37 2012] Assessing source extent using major [Mon Jan 2 08:51:37 2012] Source does appear to be extended [Mon Jan 2 08:51:37 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 2 09:18:47 2012] XMMSAS src. selection expression = ellipse(41944.898315, 23091.952118, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jan 2 09:18:47 2012] Writing source region out to fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src2_src.reg [Mon Jan 2 09:18:47 2012] Extracting stamp from image fullrun_mos1_xmm0505150501_pi300-10000_cl_sm2.00.img.gz, (445, 228) - (520, 303) [Mon Jan 2 09:18:47 2012] XMMSAS bgd. selection expression = annulus(41944.898315, 23091.952118, 1087.500000, 2175.000000, X, Y) && !ellipse(41473.580170, 23863.787720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41622.147400, 24451.368000, 1413.632041, 1413.632041, 0.000000, X, Y) && !ellipse(40412.601400, 24992.390800, 1152.592033, 1152.592033, 0.000000, X, Y) && !ellipse(41634.708489, 26004.857751, 2113.648061, 586.304127, 87.668714, X, Y) && !ellipse(41611.307159, 20588.157272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41626.589508, 22052.824097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42073.396000, 20857.629800, 1966.712057, 1966.712057, 0.000000, X, Y) && !ellipse(41495.699000, 26192.440000, 1621.232047, 1621.232047, 0.000000, X, Y) && !ellipse(41135.884338, 24318.610168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41843.144000, 22418.916000, 2087.288060, 2087.288060, 0.000000, X, Y) && !ellipse(41556.632000, 21274.842000, 3481.848100, 3481.848100, 0.000000, X, Y) && !ellipse(41559.568604, 23183.463013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41119.231995, 23264.321930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41558.158783, 24892.962036, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jan 2 09:18:47 2012] Writing fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src2.gif [Mon Jan 2 09:20:07 2012] Mean detx,y = (2657.11, -16963.02) [Mon Jan 2 09:20:09 2012] Setting backscal keywords in source and bgd. spectrum [Mon Jan 2 09:20:24 2012] Binned source spectrum to 10 counts/bin [Mon Jan 2 09:20:24 2012] Setting source spectrum file to fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Mon Jan 2 09:20:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src2_bgd.pi.gz [Mon Jan 2 09:45:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jan 2 09:45:48 2012] rmf not generated due to insufficient counts [Mon Jan 2 11:23:40 2012] Updating aperture counts using extracted products [Mon Jan 2 11:23:40 2012] Error reading totcts from fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Mon Jan 2 11:23:41 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jan 2 11:23:41 2012] Using photon index=1.80, rate=0.00452, arf fullrun_mos1_xmm0505150501_pi300-10000_pass1_cl_src2.arf [Mon Jan 2 11:23:41 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jan 2 11:23:41 2012] Updating source flux to 1.8e-13 [Mon Jan 2 11:23:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting