[Sat Dec 31 15:18:40 2011] Detection parameters:
  Position = (301.5, 93.5) = 17 12 22.99 -23 15 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.3 +/- 30.4
  Background counts = 232.2
  Rate = 0.009 +/- 0.001

[Sat Dec 31 15:18:41 2011] Off-axis axis estimate = 14.86'
[Sat Dec 31 15:24:37 2011] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 15:24:37 2011] Initial guess for spatial extent in simple fitting = 13.86"
[Sat Dec 31 15:24:37 2011] source mask rpix=3.2, npix_max = 54, mask sum = 41, frac = 0.755
[Sat Dec 31 15:24:37 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 13.86"
[Sat Dec 31 18:31:54 2011] fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_src5.ximg exists
[Sat Dec 31 18:31:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_src5.csv
[Sat Dec 31 18:31:54 2011] fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Dec 31 18:31:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_src5.csv
[Sat Dec 31 18:31:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 18:31:54 2011] fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Dec 31 18:31:54 2011] fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Dec 31 18:31:54 2011] Fit fullrun_pn_xmm0505150401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jan  1 00:16:07 2012] Warning, spatial fit 5 centroid is now closest to src. 5
[Sun Jan  1 00:16:07 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 00:16:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 00:16:07 2012] Assessing source extent using major
[Sun Jan  1 00:16:07 2012] Source does appear to be extended
[Sun Jan  1 00:16:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 00:16:07 2012] Source is confused with source 1
[Sun Jan  1 00:16:39 2012] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 00:16:39 2012] Initial guess for spatial extent in simple fitting = 13.86"
[Sun Jan  1 00:16:39 2012] source mask rpix=3.2, npix_max = 54, mask sum = 41, frac = 0.755
[Sun Jan  1 00:16:39 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.86"
[Sun Jan  1 03:16:08 2012] fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jan  1 03:16:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_src5.csv
[Sun Jan  1 03:16:08 2012] fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jan  1 03:16:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_src5.csv
[Sun Jan  1 03:16:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 03:16:09 2012] fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jan  1 03:16:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jan  1 03:16:09 2012] fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jan  1 03:16:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jan  1 03:16:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 09:09:41 2012] Spatial fit model total counts = 5669.540000, observed total counts = 5695.000000
[Sun Jan  1 09:09:41 2012] Offset between fit and detection position for source 6 = 1.928069 pixels
[Sun Jan  1 09:09:41 2012] Warning, changing simple spatial fit ID from 5 to 1
[Sun Jan  1 09:09:41 2012] 3701.564000 total counts/ 2823.080000 bgd. counts: snr = 16.533784
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.928069 pixels
  Position = (303.0, 94.7) = 17 12 22.51 -23 15 34.6
  Extent = 13.0 (12.1-13.7)", rotation angle = 0
  Source counts = 878.5 +/- 60.8
  Background counts = 2823.1
  Rate = 0.04 +/- 0.003
[Sun Jan  1 09:09:41 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 09:09:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 09:09:41 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 09:09:41 2012] Source does appear to be extended
[Sun Jan  1 09:09:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 09:10:12 2012] XMMSAS src. selection expression = ellipse(26314.126000, 8190.724000, 781.584022, 781.584022, 0.000000, X, Y)
[Sun Jan  1 09:10:12 2012] Writing source region out to fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6_src.reg
[Sun Jan  1 09:10:12 2012] Extracting stamp from image fullrun_pn_xmm0505150401_pi300-10000_cl_sm2.00.img.gz, (258, 50) - (348, 140)
[Sun Jan  1 09:10:12 2012] XMMSAS bgd. selection expression = annulus(26314.126000, 8190.724000, 1302.640037, 2605.280075, X, Y) && !ellipse(25650.731293, 8449.138313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25058.930573, 7971.099625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23255.722290, 7730.676102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.097717, 8078.059471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23815.890000, 7960.532000, 647.639219, 647.639219, 0.000000, X, Y) && !ellipse(28020.175018, 8194.521667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23407.021790, 8192.342552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24739.912000, 8178.590000, 2193.128063, 2193.128063, 0.000000, X, Y)
[Sun Jan  1 09:10:12 2012] Writing fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6.gif
[Sun Jan  1 09:19:19 2012] Mean detx,y = (-30.49, -16082.16) 
[Sun Jan  1 09:19:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 09:20:03 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 09:20:04 2012] Setting source spectrum file to fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan  1 09:20:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jan  1 12:46:04 2012] Updating aperture counts using extracted products
[Sun Jan  1 12:46:04 2012] Error reading totcts from fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan  1 12:46:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 12:46:07 2012] Using photon index=1.80, rate=0.0386, arf fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6.arf
[Sun Jan  1 12:46:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 12:46:07 2012] Updating source flux to 3.8e-13
[Sun Jan  1 12:51:57 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Sun Jan  1 12:54:25 2012] Reading fit data from xmm0505150401/analysis//spectral/fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6_pl.csv
[Sun Jan  1 12:54:25 2012] Spectral fit parameter nH value = 5.41325e+21
[Sun Jan  1 12:54:25 2012] Spectral fit parameter PhoIndex value = 2.17352
[Sun Jan  1 12:54:25 2012] Failed to get F(0.3-8.0) from xmm0505150401/analysis//spectral/fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Sun Jan  1 12:54:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 12:54:25 2012] Using Nh = 5.4e+21, photon index=2.17, rate=0.0386, arf fullrun_pn_xmm0505150401_pi300-10000_pass1_cl_src6.arf
[Sun Jan  1 12:54:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 12:54:25 2012] Updating source flux to 5.3e-13