[Sat Dec 31 15:19:22 2011] Detection parameters:
  Position = (283.1, 88.0) = 17 12 28.82 -23 16 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.8 +/- 23.5
  Background counts = 81.4
  Rate = 0.008 +/- 0.0009

[Sat Dec 31 15:19:23 2011] Off-axis axis estimate = 15.29'
[Sat Dec 31 18:31:55 2011] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 18:31:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 31 18:31:55 2011] Initial guess for spatial extent in simple fitting = 14.08"
[Sat Dec 31 18:31:55 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.146
[Sat Dec 31 18:31:55 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 14.08"
[Sat Dec 31 21:30:28 2011] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec 31 21:30:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_src3.csv
[Sat Dec 31 21:30:28 2011] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec 31 21:30:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_src3.csv
[Sat Dec 31 21:30:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 21:30:29 2011] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec 31 21:30:29 2011] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec 31 21:30:29 2011] Fit fullrun_mos1_xmm0505150401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jan  1 00:16:16 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Sun Jan  1 00:16:16 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 00:16:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 00:16:16 2012] Assessing source extent using major
[Sun Jan  1 00:16:16 2012] Source does appear to be extended
[Sun Jan  1 00:16:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 00:16:16 2012] Source is confused with source 17
[Sun Jan  1 00:16:16 2012] Source is confused with source 15
[Sun Jan  1 03:16:09 2012] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 03:16:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 03:16:09 2012] Initial guess for spatial extent in simple fitting = 14.08"
[Sun Jan  1 03:16:09 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.146
[Sun Jan  1 03:16:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.08"
[Sun Jan  1 06:18:37 2012] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jan  1 06:18:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_src3.csv
[Sun Jan  1 06:18:37 2012] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jan  1 06:18:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_src3.csv
[Sun Jan  1 06:18:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 06:18:37 2012] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jan  1 06:18:37 2012] fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jan  1 06:18:37 2012] Fit fullrun_mos1_xmm0505150401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jan  1 09:09:49 2012] Warning, spatial fit 3 centroid is now closest to src. 24
[Sun Jan  1 09:09:49 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 09:09:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 09:09:49 2012] Assessing source extent using major
[Sun Jan  1 09:09:49 2012] Source does appear to be extended
[Sun Jan  1 09:09:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 10:33:31 2012] XMMSAS src. selection expression = ellipse(24577.061340, 7611.568169, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 10:33:31 2012] Writing source region out to fullrun_mos1_xmm0505150401_pi300-10000_pass1_cl_src3_src.reg
[Sun Jan  1 10:33:31 2012] Extracting stamp from image fullrun_mos1_xmm0505150401_pi300-10000_cl_sm2.00.img.gz, (246, 51) - (321, 126)
[Sun Jan  1 10:33:31 2012] XMMSAS bgd. selection expression = annulus(24577.061340, 7611.568169, 1087.500000, 2175.000000, X, Y) && !ellipse(25564.227783, 7532.758934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23631.021301, 7544.307648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24802.738831, 8430.942734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25019.545868, 7955.077850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22991.119415, 7622.996078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26309.334600, 7738.238000, 2215.560064, 1198.000034, 345.609000, X, Y) && !ellipse(26097.601929, 7524.594719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26284.359344, 8114.486473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21758.918991, 8433.873222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24162.746000, 7846.394800, 2227.424064, 2227.424064, 0.000000, X, Y) && !ellipse(22453.231720, 7924.775337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21783.344000, 7888.897000, 2077.520060, 1668.144048, 18.576000, X, Y)
[Sun Jan  1 10:33:31 2012] Writing fullrun_mos1_xmm0505150401_pi300-10000_pass1_cl_src3.gif
[Sun Jan  1 10:37:08 2012] Mean detx,y = (16610.19, 1459.31) 
[Sun Jan  1 10:37:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 10:37:35 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 10:37:35 2012] Setting source spectrum file to fullrun_mos1_xmm0505150401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jan  1 10:37:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505150401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jan  1 11:15:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 11:15:42 2012] rmf not generated due to insufficient counts
[Sun Jan  1 12:46:08 2012] Updating aperture counts using extracted products
[Sun Jan  1 12:46:08 2012] Error reading totcts from fullrun_mos1_xmm0505150401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jan  1 12:46:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 12:46:09 2012] Using photon index=1.80, rate=0.00785, arf fullrun_mos1_xmm0505150401_pi300-10000_pass1_cl_src3.arf
[Sun Jan  1 12:46:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 12:46:09 2012] Updating source flux to 2.7e-13
[Sun Jan  1 12:46:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting