[Sun Feb 12 11:38:21 2012] Detection parameters:
  Position = (126.9, 314.9) = 17 11 50.86 -23 19 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.0 +/- 20.8
  Background counts = 121.1
  Rate = 0.006 +/- 0.0009

[Sun Feb 12 11:38:21 2012] Off-axis axis estimate = 12.49'
[Sun Feb 12 11:41:11 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:41:11 2012] Initial guess for spatial extent in simple fitting = 12.67"
[Sun Feb 12 11:41:11 2012] source mask rpix=2.9, npix_max = 46, mask sum = 29, frac = 0.622
[Sun Feb 12 11:41:11 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.67"
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src7.ximg exists
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Feb 12 13:43:54 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src7 appears to have run properly
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Feb 12 13:43:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Feb 12 13:43:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Feb 12 13:43:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 15:33:30 2012] Warning, spatial fit 7 centroid is now closest to src. 20
[Sun Feb 12 15:33:30 2012] Source 8 is offset by -2.570199 and -0.935372 pixels which is larger than
2 X fitted extent = 1.438864 x 1.438864, not incorporating fit results
[Sun Feb 12 15:33:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:33:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:33:30 2012] Assessing source extent using major
[Sun Feb 12 15:33:30 2012] Source does appear to be extended
[Sun Feb 12 15:33:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:33:30 2012] Source is confused with source 21
[Sun Feb 12 15:33:51 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:33:51 2012] Initial guess for spatial extent in simple fitting = 12.67"
[Sun Feb 12 15:33:51 2012] source mask rpix=2.9, npix_max = 46, mask sum = 29, frac = 0.622
[Sun Feb 12 15:33:51 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.67"
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 18:13:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun Feb 12 18:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:54:33 2012] Warning, spatial fit 7 centroid is now closest to src. 23
[Sun Feb 12 19:54:33 2012] Source 8 is offset by -2.811050 and -1.465189 pixels which is larger than
2 X fitted extent = 1.992993 x 1.992993, not incorporating fit results
[Sun Feb 12 19:54:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:54:33 2012] Assessing source extent using major
[Sun Feb 12 19:54:33 2012] Source does appear to be extended
[Sun Feb 12 19:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:54:47 2012] XMMSAS src. selection expression = ellipse(10993.348679, 27349.214600, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing source region out to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src8_src.reg
[Sun Feb 12 19:54:47 2012] Extracting stamp from image fullrun_pn_xmm0505150301_pi300-10000_cl_sm2.00.img.gz, (89, 277) - (164, 352)
[Sun Feb 12 19:54:47 2012] XMMSAS bgd. selection expression = annulus(10993.348679, 27349.214600, 1087.500000, 2175.000000, X, Y) && !ellipse(11043.548000, 28323.279600, 1997.048057, 1997.048057, 0.000000, X, Y) && !ellipse(11252.310944, 26579.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12107.826431, 29687.405975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10936.872800, 29192.780000, 1812.864052, 1812.864052, 0.000000, X, Y) && !ellipse(11774.853897, 27699.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11275.706000, 25423.880400, 1966.016057, 1966.016057, 0.000000, X, Y) && !ellipse(11488.553000, 30880.662000, 1470.376042, 1470.376042, 0.000000, X, Y) && !ellipse(11617.231445, 30298.038818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11020.118011, 28747.159210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11377.412000, 28842.507400, 1994.368057, 1994.368057, 0.000000, X, Y) && !ellipse(11556.329056, 28117.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11012.034775, 27805.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12188.838013, 26514.497284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12438.717422, 25572.532715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12320.838104, 24920.741608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11299.114000, 24452.852600, 1972.712057, 1972.712057, 0.000000, X, Y) && !ellipse(11843.179749, 24323.163544, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src8.gif
[Sun Feb 12 19:58:00 2012] Mean detx,y = (13481.41, 4160.66) 
[Sun Feb 12 19:58:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 19:58:21 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 19:58:21 2012] Setting source spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Feb 12 19:58:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Feb 12 20:16:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 12 20:16:17 2012] rmf not generated due to insufficient counts
[Sun Feb 12 20:55:18 2012] Updating aperture counts using extracted products
[Sun Feb 12 20:55:18 2012] Error reading totcts from fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Feb 12 20:55:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:55:19 2012] Using photon index=1.80, rate=0.00573, arf fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src8.arf
[Sun Feb 12 20:55:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:55:19 2012] Updating source flux to 5.3e-14
[Sun Feb 12 20:56:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting