[Sun Feb 12 11:38:20 2012] Detection parameters:
  Position = (129.9, 306.1) = 17 11 49.92 -23 20 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.1 +/- 25.1
  Background counts = 140.8
  Rate = 0.008 +/- 0.001

[Sun Feb 12 11:38:21 2012] Off-axis axis estimate = 12.23'
[Sun Feb 12 11:41:11 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:41:11 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Sun Feb 12 11:41:11 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.786
[Sun Feb 12 11:41:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.54"
[Sun Feb 12 13:43:53 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 13:43:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 13:43:53 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 13:43:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 13:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 13:43:54 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 15:33:30 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Sun Feb 12 15:33:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:33:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:33:30 2012] Assessing source extent using major
[Sun Feb 12 15:33:30 2012] Source does appear to be extended
[Sun Feb 12 15:33:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:33:30 2012] Source is confused with source 10
[Sun Feb 12 15:33:51 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:33:51 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Sun Feb 12 15:33:51 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.786
[Sun Feb 12 15:33:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.54"
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 18:13:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Feb 12 18:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:54:33 2012] Warning, spatial fit 1 centroid is now closest to src. 21
[Sun Feb 12 19:54:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:54:33 2012] Assessing source extent using major
[Sun Feb 12 19:54:33 2012] Source does appear to be extended
[Sun Feb 12 19:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:54:47 2012] XMMSAS src. selection expression = ellipse(11252.310944, 26579.736664, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing source region out to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src2_src.reg
[Sun Feb 12 19:54:47 2012] Extracting stamp from image fullrun_pn_xmm0505150301_pi300-10000_cl_sm2.00.img.gz, (92, 269) - (167, 344)
[Sun Feb 12 19:54:47 2012] XMMSAS bgd. selection expression = annulus(11252.310944, 26579.736664, 1087.500000, 2175.000000, X, Y) && !ellipse(11043.548000, 28323.279600, 1997.048057, 1997.048057, 0.000000, X, Y) && !ellipse(10936.872800, 29192.780000, 1812.864052, 1812.864052, 0.000000, X, Y) && !ellipse(11774.853897, 27699.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10993.348679, 27349.214600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11275.706000, 25423.880400, 1966.016057, 1966.016057, 0.000000, X, Y) && !ellipse(11020.118011, 28747.159210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11377.412000, 28842.507400, 1994.368057, 1994.368057, 0.000000, X, Y) && !ellipse(11556.329056, 28117.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11012.034775, 27805.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12188.838013, 26514.497284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12438.717422, 25572.532715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12320.838104, 24920.741608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11299.114000, 24452.852600, 1972.712057, 1972.712057, 0.000000, X, Y) && !ellipse(11843.179749, 24323.163544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11346.244553, 24049.990234, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src2.gif
[Sun Feb 12 19:55:37 2012] Mean detx,y = (13406.05, 3385.98) 
[Sun Feb 12 19:55:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 19:55:54 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 19:55:54 2012] Setting source spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Feb 12 19:55:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Feb 12 20:10:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 12 20:10:01 2012] rmf not generated due to insufficient counts
[Sun Feb 12 20:55:18 2012] Updating aperture counts using extracted products
[Sun Feb 12 20:55:18 2012] Error reading totcts from fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Feb 12 20:55:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:55:19 2012] Using photon index=1.80, rate=0.00834, arf fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src2.arf
[Sun Feb 12 20:55:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:55:19 2012] Updating source flux to 5e-14
[Sun Feb 12 20:56:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting