[Sun Feb 12 11:38:21 2012] Detection parameters:
  Position = (127.2, 331.0) = 17 11 50.75 -23 18 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.2 +/- 21.7
  Background counts = 119.9
  Rate = 0.005 +/- 0.0009

[Sun Feb 12 11:38:21 2012] Off-axis axis estimate = 12.64'
[Sun Feb 12 11:41:11 2012] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:41:11 2012] Initial guess for spatial extent in simple fitting = 12.75"
[Sun Feb 12 11:41:11 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.892
[Sun Feb 12 11:41:11 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.75"
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src17.ximg exists
[Sun Feb 12 13:43:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src17.csv
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Feb 12 13:43:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src17.csv
[Sun Feb 12 13:43:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:43:55 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Feb 12 13:43:55 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Feb 12 13:43:55 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Feb 12 15:33:30 2012] Warning, spatial fit 17 centroid is now closest to src. 5
[Sun Feb 12 15:33:30 2012] Source 18 is offset by 6.202759 and -4.992676 pixels which is larger than
2 X fitted extent = 1.434658 x 1.434658, not incorporating fit results
[Sun Feb 12 15:33:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:33:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:33:30 2012] Assessing source extent using major
[Sun Feb 12 15:33:30 2012] Source does appear to be extended
[Sun Feb 12 15:33:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:33:30 2012] Source is confused with source 1
[Sun Feb 12 15:33:51 2012] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:33:51 2012] Initial guess for spatial extent in simple fitting = 12.75"
[Sun Feb 12 15:33:51 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.892
[Sun Feb 12 15:33:51 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 12.75"
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src16.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src16.csv
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src16.csv
[Sun Feb 12 18:13:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Feb 12 18:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:54:33 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.894979 pixels away
[Sun Feb 12 19:54:33 2012] Warning, spatial fit 16 centroid is now closest to src. 7
[Sun Feb 12 19:54:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:54:33 2012] Assessing source extent using major
[Sun Feb 12 19:54:33 2012] Source does appear to be extended
[Sun Feb 12 19:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:54:48 2012] XMMSAS src. selection expression = ellipse(11020.118011, 28747.159210, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 12 19:54:48 2012] Writing source region out to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src18_src.reg
[Sun Feb 12 19:54:48 2012] Extracting stamp from image fullrun_pn_xmm0505150301_pi300-10000_cl_sm2.00.img.gz, (90, 293) - (165, 368)
[Sun Feb 12 19:54:48 2012] XMMSAS bgd. selection expression = annulus(11020.118011, 28747.159210, 1087.500000, 2175.000000, X, Y) && !ellipse(11043.548000, 28323.279600, 1997.048057, 1997.048057, 0.000000, X, Y) && !ellipse(11252.310944, 26579.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12107.826431, 29687.405975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10936.872800, 29192.780000, 1812.864052, 1812.864052, 0.000000, X, Y) && !ellipse(11774.853897, 27699.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10993.348679, 27349.214600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11275.706000, 25423.880400, 1966.016057, 1966.016057, 0.000000, X, Y) && !ellipse(11488.553000, 30880.662000, 1470.376042, 1470.376042, 0.000000, X, Y) && !ellipse(12482.934000, 30749.520800, 852.344025, 852.344025, 0.000000, X, Y) && !ellipse(11617.231445, 30298.038818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11125.859863, 30399.527313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11377.412000, 28842.507400, 1994.368057, 1994.368057, 0.000000, X, Y) && !ellipse(11556.329056, 28117.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11012.034775, 27805.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12188.838013, 26514.497284, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:54:48 2012] Writing fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src18.gif
[Sun Feb 12 20:01:06 2012] Mean detx,y = (13393.27, 5573.69) 
[Sun Feb 12 20:01:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 20:01:21 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 20:01:21 2012] Setting source spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Feb 12 20:01:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Feb 12 20:21:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 12 20:21:55 2012] rmf not generated due to insufficient counts
[Sun Feb 12 20:55:19 2012] Updating aperture counts using extracted products
[Sun Feb 12 20:55:19 2012] Error reading totcts from fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Feb 12 20:55:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:55:19 2012] Using photon index=1.80, rate=0.00536, arf fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src18.arf
[Sun Feb 12 20:55:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:55:19 2012] Updating source flux to 3.5e-14
[Sun Feb 12 20:56:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting