[Sun Feb 12 11:38:21 2012] Detection parameters:
  Position = (134.9, 360.1) = 17 11 48.30 -23 16 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.9 +/- 20.0
  Background counts = 128.6
  Rate = 0.004 +/- 0.0008

[Sun Feb 12 11:38:21 2012] Off-axis axis estimate = 12.67'
[Sun Feb 12 11:41:11 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:41:11 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Sun Feb 12 11:41:11 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.890
[Sun Feb 12 11:41:11 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.76"
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 12 13:43:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 12 13:43:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src11.csv
[Sun Feb 12 13:43:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 12 13:43:54 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 12 15:33:30 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.818647 pixels away
[Sun Feb 12 15:33:30 2012] Spatial fit model total counts = 963.541000, observed total counts = 961.000000
[Sun Feb 12 15:33:30 2012] Offset between fit and detection position for source 12 = 5.174968 pixels
[Sun Feb 12 15:33:30 2012] Warning, changing simple spatial fit ID from 11 to 13
[Sun Feb 12 15:33:30 2012] 756.584000 total counts/ 554.763000 bgd. counts: snr = 8.568654
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 5.174968 pixels
  Position = (132.6, 355.5) = 17 11 49.04 -23 16 36.3
  Extent = 18.4 (13.2-25.3)", rotation angle = 0
  Source counts = 201.8 +/- 27.5
  Background counts = 554.8
  Rate = 0.02 +/- 0.002
[Sun Feb 12 15:33:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:33:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:33:30 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 15:33:30 2012] Source does appear to be extended
[Sun Feb 12 15:33:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:33:30 2012] Source is confused with source 13
[Sun Feb 12 15:33:30 2012] Source is confused with source 14
[Sun Feb 12 15:33:30 2012] Source is confused with source 15
[Sun Feb 12 15:33:30 2012] Source is confused with source 16
[Sun Feb 12 15:33:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:33:51 2012] Initial guess for spatial extent in simple fitting = 18.38"
[Sun Feb 12 15:33:51 2012] source mask rpix=4.2, npix_max = 89, mask sum = 81, frac = 0.907
[Sun Feb 12 15:33:51 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 18.38"
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src10.ximg exists
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Feb 12 18:13:12 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Feb 12 18:13:13 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Feb 12 19:54:33 2012] Source 12 is offset by -1.494264 and 1.685149 pixels which is larger than
2 X fitted extent = 1.424432 x 1.424432, not incorporating fit results
[Sun Feb 12 19:54:33 2012] Warning, spatial fit 10 centroid is now closest to src. 14
[Sun Feb 12 19:54:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:54:33 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:54:33 2012] Source does appear to be extended
[Sun Feb 12 19:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:54:47 2012] XMMSAS src. selection expression = ellipse(11488.553000, 30880.662000, 1102.782032, 1102.782032, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing source region out to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src12_src.reg
[Sun Feb 12 19:54:47 2012] Extracting stamp from image fullrun_pn_xmm0505150301_pi300-10000_cl_sm2.00.img.gz, (69, 292) - (196, 419)
[Sun Feb 12 19:54:47 2012] XMMSAS bgd. selection expression = annulus(11488.553000, 30880.662000, 1837.970053, 3675.940106, X, Y) && !ellipse(11043.548000, 28323.279600, 1997.048057, 1997.048057, 0.000000, X, Y) && !ellipse(11252.310944, 26579.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12107.826431, 29687.405975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10936.872800, 29192.780000, 1812.864052, 1812.864052, 0.000000, X, Y) && !ellipse(11774.853897, 27699.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10993.348679, 27349.214600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11275.706000, 25423.880400, 1966.016057, 1966.016057, 0.000000, X, Y) && !ellipse(12482.934000, 30749.520800, 852.344025, 852.344025, 0.000000, X, Y) && !ellipse(11617.231445, 30298.038818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11125.859863, 30399.527313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11020.118011, 28747.159210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11377.412000, 28842.507400, 1994.368057, 1994.368057, 0.000000, X, Y) && !ellipse(11556.329056, 28117.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11012.034775, 27805.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12188.838013, 26514.497284, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src12.gif
[Sun Feb 12 19:59:08 2012] Mean detx,y = (12691.68, 7484.46) 
[Sun Feb 12 19:59:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 19:59:36 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 19:59:36 2012] Setting source spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Feb 12 19:59:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Feb 12 20:55:18 2012] Updating aperture counts using extracted products
[Sun Feb 12 20:55:18 2012] Error reading totcts from fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Feb 12 20:55:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:55:19 2012] Using photon index=1.80, rate=0.0154, arf fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src12.arf
[Sun Feb 12 20:55:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:55:19 2012] Updating source flux to 9e-14
[Sun Feb 12 20:56:07 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Sun Feb 12 20:56:07 2012] Flag c found in src. 12 procflags, skipping spectral fitting