[Sun Feb 12 11:38:21 2012] Detection parameters:
  Position = (131.9, 290.0) = 17 11 49.29 -23 21 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.6 +/- 23.6
  Background counts = 147.6
  Rate = 0.006 +/- 0.001

[Sun Feb 12 11:38:21 2012] Off-axis axis estimate = 12.09'
[Sun Feb 12 11:41:11 2012] Using EEF radius (= 12.47 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:41:11 2012] Initial guess for spatial extent in simple fitting = 12.47"
[Sun Feb 12 11:41:11 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.794
[Sun Feb 12 11:41:11 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.47"
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src9.ximg exists
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Feb 12 13:43:54 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_src9 appears to have run properly
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Feb 12 13:43:54 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Feb 12 13:43:54 2012] Fit fullrun_pn_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Feb 12 15:33:30 2012] Spatial fit model total counts = 1277.460000, observed total counts = 1278.000000
[Sun Feb 12 15:33:30 2012] Offset between fit and detection position for source 10 = 3.295992 pixels
[Sun Feb 12 15:33:30 2012] Warning, changing simple spatial fit ID from 9 to 8
[Sun Feb 12 15:33:30 2012] 1258.060000 total counts/ 949.392000 bgd. counts: snr = 10.017719
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.295992 pixels
  Position = (130.2, 292.8) = 17 11 49.84 -23 21 9.1
  Extent = 24.6 (24.5-49.2)", rotation angle = 0
  Source counts = 308.7 +/- 35.5
  Background counts = 949.4
  Rate = 0.02 +/- 0.003
[Sun Feb 12 15:33:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:33:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:33:30 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 15:33:30 2012] Source does appear to be extended
[Sun Feb 12 15:33:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:33:30 2012] Source is confused with source 2
[Sun Feb 12 15:33:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:33:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 15:33:51 2012] Initial guess for spatial extent in simple fitting = 24.58"
[Sun Feb 12 15:33:51 2012] source mask rpix=5.6, npix_max = 151, mask sum = 105, frac = 0.694
[Sun Feb 12 15:33:51 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 24.58"
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src8.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src8.csv
[Sun Feb 12 18:13:12 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Feb 12 18:13:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src8.csv
[Sun Feb 12 18:13:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Feb 12 18:13:13 2012] fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Feb 12 18:13:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sun Feb 12 18:13:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:54:33 2012] Warning, spatial fit 8 centroid is now closest to src. 1
[Sun Feb 12 19:54:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:54:33 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:54:33 2012] Source does appear to be extended
[Sun Feb 12 19:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:54:47 2012] XMMSAS src. selection expression = ellipse(11275.706000, 25423.880400, 1474.512042, 1474.512042, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing source region out to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src10_src.reg
[Sun Feb 12 19:54:47 2012] Extracting stamp from image fullrun_pn_xmm0505150301_pi300-10000_cl_sm2.00.img.gz, (45, 208) - (215, 378)
[Sun Feb 12 19:54:47 2012] XMMSAS bgd. selection expression = annulus(11275.706000, 25423.880400, 2457.520071, 4915.040141, X, Y) && !ellipse(11043.548000, 28323.279600, 1997.048057, 1997.048057, 0.000000, X, Y) && !ellipse(11252.310944, 26579.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11534.920000, 23353.330000, 719.542421, 719.542421, 0.000000, X, Y) && !ellipse(12107.826431, 29687.405975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10936.872800, 29192.780000, 1812.864052, 1812.864052, 0.000000, X, Y) && !ellipse(11774.853897, 27699.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10993.348679, 27349.214600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11488.553000, 30880.662000, 1470.376042, 1470.376042, 0.000000, X, Y) && !ellipse(12482.934000, 30749.520800, 852.344025, 852.344025, 0.000000, X, Y) && !ellipse(11617.231445, 30298.038818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11125.859863, 30399.527313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11020.118011, 28747.159210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11377.412000, 28842.507400, 1994.368057, 1994.368057, 0.000000, X, Y) && !ellipse(11556.329056, 28117.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11012.034775, 27805.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12188.838013, 26514.497284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12438.717422, 25572.532715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12320.838104, 24920.741608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11299.114000, 24452.852600, 1972.712057, 1972.712057, 0.000000, X, Y) && !ellipse(11843.179749, 24323.163544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11346.244553, 24049.990234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11929.385895, 22668.082001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11444.738174, 22744.520294, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src10.gif
[Sun Feb 12 19:58:27 2012] Mean detx,y = (13116.93, 2228.86) 
[Sun Feb 12 19:58:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 19:59:02 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 19:59:03 2012] Setting source spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Feb 12 19:59:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Feb 12 20:55:18 2012] Updating aperture counts using extracted products
[Sun Feb 12 20:55:18 2012] Error reading totcts from fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Feb 12 20:55:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:55:19 2012] Using photon index=1.80, rate=0.0235, arf fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src10.arf
[Sun Feb 12 20:55:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:55:19 2012] Updating source flux to 1.3e-13
[Sun Feb 12 20:56:07 2012] Flag c found in src. 10 procflags, skipping spectral fitting