[Sun Feb 12 11:38:20 2012] Detection parameters:
  Position = (123.5, 325.9) = 17 11 51.93 -23 18 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.2 +/- 21.3
  Background counts = 118.9
  Rate = 0.004 +/- 0.0009

[Sun Feb 12 11:38:21 2012] Off-axis axis estimate = 12.84'
[Sun Feb 12 11:41:11 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:41:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 11:41:11 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Sun Feb 12 11:41:11 2012] source mask rpix=3.0, npix_max = 47, mask sum = 18, frac = 0.377
[Sun Feb 12 11:41:11 2012] Skipping simple spatial due to low active detector fraction
[Sun Feb 12 15:33:30 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:33:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:33:30 2012] Assessing source extent using major
[Sun Feb 12 15:33:30 2012] Source does appear to be extended
[Sun Feb 12 15:33:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 15:33:30 2012] Source is confused with source 6
[Sun Feb 12 15:33:30 2012] Source is confused with source 18
[Sun Feb 12 15:33:30 2012] Source is confused with source 21
[Sun Feb 12 15:33:51 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 15:33:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 15:33:51 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Sun Feb 12 15:33:51 2012] source mask rpix=3.0, npix_max = 47, mask sum = 18, frac = 0.377
[Sun Feb 12 15:33:51 2012] Skipping simple spatial due to low active detector fraction
[Sun Feb 12 19:54:33 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 23.858407 pixels away
[Sun Feb 12 19:54:33 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 19.134671 pixels away
[Sun Feb 12 19:54:33 2012] Spatial fit model total counts = 1079.780000, observed total counts = 1082.000000
[Sun Feb 12 19:54:33 2012] Offset between fit and detection position for source 1 = 3.998445 pixels
[Sun Feb 12 19:54:33 2012] Warning, changing simple spatial fit ID from -1 to 18
[Sun Feb 12 19:54:33 2012] 704.989720 total counts/ 0.067720 bgd. counts: snr = 2708.837236
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.998445 pixels
  Position = (127.5, 326.1) = 17 11 50.67 -23 18 44.1
  Extent = 25.0 (24.9-49.9)", rotation angle = 0
  Source counts = 704.9 +/- 26.6
  Background counts = 0.1
  Rate = 0.05 +/- 0.002
[Sun Feb 12 19:54:33 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:54:33 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:54:33 2012] Source does appear to be extended
[Sun Feb 12 19:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:54:47 2012] XMMSAS src. selection expression = ellipse(11043.548000, 28323.279600, 1497.786043, 1497.786043, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing source region out to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 12 19:54:47 2012] Extracting stamp from image fullrun_pn_xmm0505150301_pi300-10000_cl_sm2.00.img.gz, (41, 240) - (214, 412)
[Sun Feb 12 19:54:47 2012] XMMSAS bgd. selection expression = annulus(11043.548000, 28323.279600, 2496.310072, 4992.620144, X, Y) && !ellipse(11252.310944, 26579.736664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11534.920000, 23353.330000, 719.542421, 719.542421, 0.000000, X, Y) && !ellipse(12107.826431, 29687.405975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10936.872800, 29192.780000, 1812.864052, 1812.864052, 0.000000, X, Y) && !ellipse(11774.853897, 27699.256317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10993.348679, 27349.214600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11275.706000, 25423.880400, 1966.016057, 1966.016057, 0.000000, X, Y) && !ellipse(11488.553000, 30880.662000, 1470.376042, 1470.376042, 0.000000, X, Y) && !ellipse(12482.934000, 30749.520800, 852.344025, 852.344025, 0.000000, X, Y) && !ellipse(11617.231445, 30298.038818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11125.859863, 30399.527313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11020.118011, 28747.159210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11377.412000, 28842.507400, 1994.368057, 1994.368057, 0.000000, X, Y) && !ellipse(11556.329056, 28117.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11012.034775, 27805.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12188.838013, 26514.497284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12438.717422, 25572.532715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12320.838104, 24920.741608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11299.114000, 24452.852600, 1972.712057, 1972.712057, 0.000000, X, Y) && !ellipse(11843.179749, 24323.163544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11346.244553, 24049.990234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11929.385895, 22668.082001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11444.738174, 22744.520294, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 12 19:54:47 2012] Writing fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1.gif
[Sun Feb 12 19:54:54 2012] Mean detx,y = (13087.54, 5104.29) 
[Sun Feb 12 19:54:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 19:55:30 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 19:55:30 2012] Setting source spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 19:55:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 12 20:55:18 2012] Updating aperture counts using extracted products
[Sun Feb 12 20:55:18 2012] Error reading totcts from fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 20:55:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:55:19 2012] Using photon index=1.80, rate=0.0536, arf fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1.arf
[Sun Feb 12 20:55:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:55:19 2012] Updating source flux to 3.2e-13
[Sun Feb 12 20:56:07 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Feb 12 20:57:13 2012] Reading fit data from xmm0505150301/analysis//spectral/fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Feb 12 20:57:13 2012] Spectral fit parameter nH value = 5.69106e+21
[Sun Feb 12 20:57:13 2012] Spectral fit parameter PhoIndex value = 2.18395
[Sun Feb 12 20:57:13 2012] Failed to get F(0.3-8.0) from xmm0505150301/analysis//spectral/fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 12 20:57:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:57:13 2012] Using Nh = 5.7e+21, photon index=2.18, rate=0.0536, arf fullrun_pn_xmm0505150301_pi300-10000_pass1_cl_src1.arf
[Sun Feb 12 20:57:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:57:13 2012] Updating source flux to 5.2e-13