[Sun Feb 12 11:39:03 2012] Detection parameters:
  Position = (335.2, 344.2) = 17 10 45.07 -23 17 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.4 +/- 13.6
  Background counts = 32.2
  Rate = 0.004 +/- 0.0007

[Sun Feb 12 11:39:03 2012] Off-axis axis estimate = 4.26'
[Sun Feb 12 14:32:26 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:32:26 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Sun Feb 12 14:32:26 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Sun Feb 12 14:32:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.56"
[Sun Feb 12 15:33:21 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_src7.ximg exists
[Sun Feb 12 15:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 15:33:21 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Feb 12 15:33:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_src7.csv
[Sun Feb 12 15:33:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 15:33:21 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Feb 12 15:33:21 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Feb 12 15:33:21 2012] Fit fullrun_mos2_xmm0505150301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Feb 12 15:33:38 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.422732 pixels away
[Sun Feb 12 15:33:38 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 15:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 15:33:38 2012] Assessing source extent using major
[Sun Feb 12 15:33:38 2012] Source does appear to be extended
[Sun Feb 12 15:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 18:50:45 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 18:50:45 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Sun Feb 12 18:50:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Sun Feb 12 18:50:45 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.56"
[Sun Feb 12 19:54:25 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Feb 12 19:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 19:54:25 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Feb 12 19:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_src7.csv
[Sun Feb 12 19:54:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 19:54:25 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Feb 12 19:54:25 2012] fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Feb 12 19:54:25 2012] Fit fullrun_mos2_xmm0505150301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Feb 12 19:54:39 2012] Spatial fit model total counts = 422.221000, observed total counts = 424.000000
[Sun Feb 12 19:54:39 2012] Offset between fit and detection position for source 17 = 0.234087 pixels
[Sun Feb 12 19:54:39 2012] 421.746300 total counts/ 376.664000 bgd. counts: snr = 2.322892
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.234087 pixels
  Position = (335.0, 344.3) = 17 10 45.14 -23 17 25.6
  Extent = 3.7 (2.8-5.1)", rotation angle = 0
  Source counts = 45.1 +/- 20.5
  Background counts = 376.7
  Rate = 0.002 +/- 0.0007
[Sun Feb 12 19:54:39 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:54:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:54:39 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 19:54:39 2012] Source does appear to be extended
[Sun Feb 12 19:54:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 20:40:38 2012] XMMSAS src. selection expression = ellipse(29098.222786, 29905.319800, 222.360606, 222.360606, 0.000000, X, Y)
[Sun Feb 12 20:40:38 2012] Writing source region out to fullrun_mos2_xmm0505150301_pi300-10000_pass1_cl_src17_src.reg
[Sun Feb 12 20:40:38 2012] Extracting stamp from image fullrun_mos2_xmm0505150301_pi300-10000_cl_sm2.00.img.gz, (322, 332) - (348, 357)
[Sun Feb 12 20:40:38 2012] XMMSAS bgd. selection expression = annulus(29098.222786, 29905.319800, 370.601011, 741.202021, X, Y)
[Sun Feb 12 20:40:38 2012] Writing fullrun_mos2_xmm0505150301_pi300-10000_pass1_cl_src17.gif
[Sun Feb 12 20:42:23 2012] Mean detx,y = (4665.67, -5355.34) 
[Sun Feb 12 20:42:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 20:42:31 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 20:42:31 2012] Setting source spectrum file to fullrun_mos2_xmm0505150301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Feb 12 20:42:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Feb 12 20:48:19 2012] Not generating rmf since there are only 45 counts
[Sun Feb 12 20:48:19 2012] rmf not generated due to insufficient counts
[Sun Feb 12 20:55:19 2012] Updating aperture counts using extracted products
[Sun Feb 12 20:55:19 2012] Error reading totcts from fullrun_mos2_xmm0505150301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Feb 12 20:55:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 20:55:20 2012] Using photon index=1.80, rate=0.00163, arf fullrun_mos2_xmm0505150301_pi300-10000_pass1_cl_src17.arf
[Sun Feb 12 20:55:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 20:55:20 2012] Updating source flux to 3.3e-14
[Sun Feb 12 20:55:29 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 20:56:07 2012] xmm0505150301/analysis//spectral/fullrun_mos2_xmm0505150301_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete