[Sat Dec 17 13:48:47 2011] Detection parameters:
  Position = (323.4, 507.1) = 17 12 23.23 -23 28 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.1 +/- 15.7
  Background counts = 181.5
  Rate = 0.003 +/- 0.0007

[Sat Dec 17 13:48:47 2011] Off-axis axis estimate = 15.24'
[Sat Dec 17 13:51:11 2011] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 13:51:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 13:51:11 2011] Initial guess for spatial extent in simple fitting = 14.05"
[Sat Dec 17 13:51:11 2011] source mask rpix=3.2, npix_max = 55, mask sum = 47, frac = 0.845
[Sat Dec 17 13:51:11 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 14.05"
[Sat Dec 17 14:14:42 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_src19.ximg exists
[Sat Dec 17 14:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_src19.csv
[Sat Dec 17 14:14:42 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Dec 17 14:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_src19.csv
[Sat Dec 17 14:14:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 14:14:42 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Dec 17 14:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Dec 17 14:14:42 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Dec 17 14:14:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Dec 17 14:14:42 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 14:37:24 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 10.576442 pixels away
[Sat Dec 17 14:37:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 14:37:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 14:37:24 2011] Assessing source extent using major
[Sat Dec 17 14:37:24 2011] Source does appear to be extended
[Sat Dec 17 14:37:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 14:37:34 2011] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 14:37:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 14:37:34 2011] Initial guess for spatial extent in simple fitting = 14.05"
[Sat Dec 17 14:37:34 2011] source mask rpix=3.2, npix_max = 55, mask sum = 47, frac = 0.845
[Sat Dec 17 14:37:34 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 14.05"
[Sat Dec 17 15:03:23 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_src19.ximg exists
[Sat Dec 17 15:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_src19.csv
[Sat Dec 17 15:03:23 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Dec 17 15:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_src19.csv
[Sat Dec 17 15:03:23 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 15:03:23 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Dec 17 15:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Dec 17 15:03:23 2011] fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Dec 17 15:03:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Dec 17 15:03:23 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 15:26:16 2011] Spatial fit model total counts = 1406.770000, observed total counts = 1684.000000
[Sat Dec 17 15:26:16 2011] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Dec 17 15:26:16 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 15:26:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 15:26:16 2011] Assessing source extent using major
[Sat Dec 17 15:26:16 2011] Source does appear to be extended
[Sat Dec 17 15:26:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 15:26:25 2011] XMMSAS src. selection expression = ellipse(28086.526855, 44072.721100, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 15:26:25 2011] Writing source region out to fullrun_pn_xmm0505150201_pi300-10000_pass1_cl_src19_src.reg
[Sat Dec 17 15:26:25 2011] Extracting stamp from image fullrun_pn_xmm0505150201_pi300-10000_cl_sm2.00.img.gz, (286, 470) - (361, 545)
[Sat Dec 17 15:26:25 2011] XMMSAS bgd. selection expression = annulus(28086.526855, 44072.721100, 1087.500000, 2175.000000, X, Y)
[Sat Dec 17 15:26:25 2011] Writing fullrun_pn_xmm0505150201_pi300-10000_pass1_cl_src19.gif
[Sat Dec 17 15:37:22 2011] Mean detx,y = (2581.30, -16211.23) 
[Sat Dec 17 15:37:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 15:37:51 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 15:37:51 2011] Setting source spectrum file to fullrun_pn_xmm0505150201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Dec 17 15:37:51 2011] Setting bgd. spectrum file to fullrun_pn_xmm0505150201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Dec 17 15:46:50 2011] Not generating rmf since there are only 75 counts
[Sat Dec 17 15:46:50 2011] rmf not generated due to insufficient counts
[Sat Dec 17 16:14:29 2011] Updating aperture counts using extracted products
[Sat Dec 17 16:14:29 2011] Error reading totcts from fullrun_pn_xmm0505150201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Dec 17 16:14:29 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 16:14:29 2011] Using photon index=1.80, rate=0.00333, arf fullrun_pn_xmm0505150201_pi300-10000_pass1_cl_src19.arf
[Sat Dec 17 16:14:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 16:14:29 2011] Updating source flux to 2.8e-14
[Sat Dec 17 16:15:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting