[Sat Apr 28 10:39:08 2012] Detection parameters:
  Position = (291.9, 287.1) = 17 12 33.27 -23 24 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 618.4 +/- 57.7
  Background counts = 1323.3
  Rate = 0.03 +/- 0.003

[Sat Apr 28 10:39:11 2012] Off-axis axis estimate = 0.95'
[Sat Apr 28 10:48:43 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 10:48:43 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sat Apr 28 10:48:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Sat Apr 28 10:48:43 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 6.90"
[Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src66.ximg exists
[Sun Apr 29 08:47:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src66.csv
[Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src66_1.ximg exists
[Sun Apr 29 08:47:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src66.csv
[Sun Apr 29 08:47:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 08:47:09 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Sun Apr 29 08:47:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Sun Apr 29 08:47:09 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Sun Apr 29 08:47:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Sun Apr 29 08:47:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:32:29 2012] Warning, spatial fit 66 centroid is now closest to src. 73
[Mon Apr 30 21:32:29 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:32:29 2012] Assessing source extent using major
[Mon Apr 30 21:32:29 2012] Source does appear to be extended
[Mon Apr 30 21:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:32:29 2012] Source is confused with source 73
[Mon Apr 30 21:34:19 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:34:19 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Mon Apr 30 21:34:19 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Mon Apr 30 21:34:19 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 6.90"
[Tue May  1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src58.ximg exists
[Tue May  1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src58.csv
[Tue May  1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src58_1.ximg exists
[Tue May  1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src58.csv
[Tue May  1 11:40:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Tue May  1 11:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Tue May  1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Tue May  1 11:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Tue May  1 11:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:53 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 12.268308 pixels away
[Thu May  3 23:17:53 2012] Warning, spatial fit 58 centroid is now closest to src. 82
[Thu May  3 23:17:53 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:17:53 2012] Assessing source extent using major
[Thu May  3 23:17:53 2012] Source does appear to be extended
[Thu May  3 23:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:20:00 2012] XMMSAS src. selection expression = ellipse(25347.720764, 24931.112152, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  3 23:20:00 2012] Writing source region out to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src75_src.reg
[Thu May  3 23:20:00 2012] Extracting stamp from image fullrun_pn_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (254, 250) - (329, 325)
[Thu May  3 23:20:00 2012] XMMSAS bgd. selection expression = annulus(25347.720764, 24931.112152, 1087.500000, 2175.000000, X, Y) && !ellipse(28092.788000, 30309.800000, 8530.752245, 8530.752245, 0.000000, X, Y) && !ellipse(28209.064000, 29843.054000, 4527.912130, 4527.912130, 344.057000, X, Y) && !ellipse(24610.427094, 27837.442627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27852.790000, 27131.038000, 2246.208065, 1113.240032, 248.657000, X, Y) && !ellipse(24239.153107, 27092.834351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.040000, 26471.182000, 3744.456108, 3744.456108, 0.000000, X, Y) && !ellipse(28559.426000, 26130.420000, 1248.152036, 1248.152036, 0.000000, X, Y) && !ellipse(23129.645569, 25872.588196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.496552, 25964.444244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.494354, 25519.766663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26865.124400, 27909.991400, 3518.856101, 3518.856101, 0.000000, X, Y) && !ellipse(27960.938660, 25537.818207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.632000, 25688.308000, 1816.176052, 1816.176052, 0.000000, X, Y) && !ellipse(25795.315600, 24870.786000, 1077.784031, 1077.784031, 0.000000, X, Y) && !ellipse(24783.633240, 25012.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24039.139130, 25023.671783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.841600, 25202.640000, 908.688026, 908.688026, 0.000000, X, Y) && !ellipse(25381.364800, 24432.837400, 380.405611, 380.405611, 0.000000, X, Y) && !ellipse(27288.815338, 24144.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27467.570496, 23712.273163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25985.644653, 23353.594635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.991821, 23436.643951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.206238, 23022.432831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.784851, 23345.419800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27384.096000, 21980.778000, 1277.368037, 1277.368037, 0.000000, X, Y)
[Thu May  3 23:20:00 2012] Writing fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src75.gif
[Fri May  4 06:35:59 2012] Mean detx,y = (-1602.96, 2386.79) 
[Fri May  4 06:36:05 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 06:36:52 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 06:36:53 2012] Setting source spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Fri May  4 06:36:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sat May  5 23:18:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  5 23:18:27 2012] rmf not generated due to insufficient counts
[Wed May  9 07:39:52 2012] Updating aperture counts using extracted products
[Wed May  9 07:39:52 2012] Error reading totcts from fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed May  9 07:40:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:02 2012] Using photon index=1.80, rate=0.0318, arf fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src75.arf
[Wed May  9 07:40:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:02 2012] Updating source flux to 9.7e-14
[Wed May  9 08:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting