[Sat Apr 28 10:39:08 2012] Detection parameters:
  Position = (279.2, 312.0) = 17 12 37.30 -23 22 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 654.4 +/- 59.8
  Background counts = 1529.0
  Rate = 0.03 +/- 0.003

[Sat Apr 28 10:39:11 2012] Off-axis axis estimate = 1.71'
[Sat Apr 28 10:48:43 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 10:48:43 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Apr 28 10:48:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sat Apr 28 10:48:43 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 7.28"
[Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src52.ximg exists
[Sun Apr 29 08:47:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src52.csv
[Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src52_1.ximg exists
[Sun Apr 29 08:47:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src52.csv
[Sun Apr 29 08:47:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 08:47:08 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sun Apr 29 08:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sun Apr 29 08:47:08 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sun Apr 29 08:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sun Apr 29 08:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:32:29 2012] Spatial fit model total counts = -4525.370000, observed total counts = 16028.000000
[Mon Apr 30 21:32:29 2012] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 21:32:29 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:32:29 2012] Assessing source extent using major
[Mon Apr 30 21:32:29 2012] Source does appear to be extended
[Mon Apr 30 21:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:32:29 2012] Source is confused with source 62
[Mon Apr 30 21:34:19 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:34:19 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Apr 30 21:34:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Apr 30 21:34:19 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 7.28"
[Tue May  1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src46.ximg exists
[Tue May  1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src46.csv
[Tue May  1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue May  1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src46.csv
[Tue May  1 11:40:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue May  1 11:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue May  1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue May  1 11:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue May  1 11:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:53 2012] Spatial fit model total counts = 20447.400000, observed total counts = 16028.000000
[Thu May  3 23:17:53 2012] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:17:53 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 12.600500 pixels away
[Thu May  3 23:17:53 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:17:53 2012] Assessing source extent using major
[Thu May  3 23:17:53 2012] Source does appear to be extended
[Thu May  3 23:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:19:58 2012] XMMSAS src. selection expression = ellipse(24239.153107, 27092.834351, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  3 23:19:58 2012] Writing source region out to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src60_src.reg
[Thu May  3 23:19:58 2012] Extracting stamp from image fullrun_pn_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (242, 274) - (317, 349)
[Thu May  3 23:19:58 2012] XMMSAS bgd. selection expression = annulus(24239.153107, 27092.834351, 1087.500000, 2175.000000, X, Y) && !ellipse(25919.836000, 31908.322000, 4193.328121, 4193.328121, 0.000000, X, Y) && !ellipse(27387.812000, 30716.584000, 2820.448081, 2820.448081, 0.000000, X, Y) && !ellipse(28092.788000, 30309.800000, 8530.752245, 8530.752245, 0.000000, X, Y) && !ellipse(25573.950000, 30654.906000, 1509.304043, 1509.304043, 0.000000, X, Y) && !ellipse(26715.124573, 30134.820892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25875.266000, 30178.698000, 1327.856038, 1327.856038, 0.000000, X, Y) && !ellipse(28209.064000, 29843.054000, 4527.912130, 4527.912130, 344.057000, X, Y) && !ellipse(25112.230286, 29702.584778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23631.087677, 29234.152649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.976000, 29365.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(27205.976000, 29017.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(26218.804016, 28963.196289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.358398, 28884.482635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23202.881897, 28749.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.427094, 27837.442627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27852.790000, 27131.038000, 2246.208065, 1113.240032, 248.657000, X, Y) && !ellipse(24699.040000, 26471.182000, 3744.456108, 3744.456108, 0.000000, X, Y) && !ellipse(23129.645569, 25872.588196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.496552, 25964.444244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.494354, 25519.766663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26865.124400, 27909.991400, 3518.856101, 3518.856101, 0.000000, X, Y) && !ellipse(26684.632000, 25688.308000, 1816.176052, 1816.176052, 0.000000, X, Y) && !ellipse(25795.315600, 24870.786000, 1077.784031, 1077.784031, 0.000000, X, Y) && !ellipse(25347.720764, 24931.112152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.633240, 25012.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24039.139130, 25023.671783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.841600, 25202.640000, 908.688026, 908.688026, 0.000000, X, Y)
[Thu May  3 23:19:58 2012] Writing fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src60.gif
[Fri May  4 05:06:58 2012] Mean detx,y = (-2722.35, 151.17) 
[Fri May  4 05:07:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 05:07:53 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 05:07:54 2012] Setting source spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Fri May  4 05:07:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Fri May  4 15:07:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 15:07:50 2012] rmf not generated due to insufficient counts
[Wed May  9 07:39:49 2012] Updating aperture counts using extracted products
[Wed May  9 07:39:49 2012] Error reading totcts from fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Wed May  9 07:40:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:00 2012] Using photon index=1.80, rate=0.0349, arf fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src60.arf
[Wed May  9 07:40:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:00 2012] Updating source flux to 1.1e-13
[Wed May  9 08:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting