[Sat Apr 28 10:39:07 2012] Detection parameters: Position = (336.0, 306.0) = 17 12 19.33 -23 23 16.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 396.5 +/- 65.2 Background counts = 2086.7 Rate = 0.02 +/- 0.003 [Sat Apr 28 10:39:11 2012] Off-axis axis estimate = 2.78' [Sat Apr 28 10:48:43 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting [Sat Apr 28 10:48:43 2012] Initial guess for spatial extent in simple fitting = 7.82" [Sat Apr 28 10:48:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758 [Sat Apr 28 10:48:43 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 7.82" [Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src51.ximg exists [Sun Apr 29 08:47:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src51.csv [Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src51_1.ximg exists [Sun Apr 29 08:47:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src51.csv [Sun Apr 29 08:47:05 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Apr 29 08:47:08 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists [Sun Apr 29 08:47:08 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists [Sun Apr 29 08:47:08 2012] Fit fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly [Mon Apr 30 21:32:29 2012] Warning, spatial fit 51 centroid is now closest to src. 63 [Mon Apr 30 21:32:29 2012] Vigneting correction estimate = 1.000000 [Mon Apr 30 21:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Apr 30 21:32:29 2012] Assessing source extent using major [Mon Apr 30 21:32:29 2012] Source does appear to be extended [Mon Apr 30 21:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Apr 30 21:32:29 2012] Source is confused with source 64 [Mon Apr 30 21:34:19 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting [Mon Apr 30 21:34:19 2012] Initial guess for spatial extent in simple fitting = 7.82" [Mon Apr 30 21:34:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758 [Mon Apr 30 21:34:19 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.82" [Tue May 1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src45.ximg exists [Tue May 1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src45.csv [Tue May 1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src45_1.ximg exists [Tue May 1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src45.csv [Tue May 1 11:40:46 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src45_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists [Tue May 1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists [Tue May 1 11:40:49 2012] Fit fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly [Thu May 3 23:17:53 2012] Source 59 is offset by 0.591257 and 6.046292 pixels which is larger than 2 X fitted extent = 0.899209 x 0.899209, not incorporating fit results [Thu May 3 23:17:53 2012] Vigneting correction estimate = 1.000000 [Thu May 3 23:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 3 23:17:53 2012] Assessing source extent using major [Thu May 3 23:17:53 2012] Source does appear to be extended [Thu May 3 23:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 3 23:19:58 2012] XMMSAS src. selection expression = ellipse(29185.156738, 26572.719421, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 3 23:19:58 2012] Writing source region out to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src59_src.reg [Thu May 3 23:19:58 2012] Extracting stamp from image fullrun_pn_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (299, 268) - (374, 343) [Thu May 3 23:19:58 2012] XMMSAS bgd. selection expression = annulus(29185.156738, 26572.719421, 1087.500000, 2175.000000, X, Y) && !ellipse(25919.836000, 31908.322000, 4193.328121, 4193.328121, 0.000000, X, Y) && !ellipse(27387.812000, 30716.584000, 2820.448081, 2820.448081, 0.000000, X, Y) && !ellipse(28092.788000, 30309.800000, 8530.752245, 8530.752245, 0.000000, X, Y) && !ellipse(28209.064000, 29843.054000, 4527.912130, 4527.912130, 344.057000, X, Y) && !ellipse(28768.401800, 29786.358000, 1286.664037, 1286.664037, 0.205000, X, Y) && !ellipse(25900.976000, 29365.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(27577.207275, 29268.922913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.976000, 29017.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(26218.804016, 28963.196289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27852.790000, 27131.038000, 2246.208065, 1113.240032, 248.657000, X, Y) && !ellipse(24699.040000, 26471.182000, 3744.456108, 3744.456108, 0.000000, X, Y) && !ellipse(28559.426000, 26130.420000, 1248.152036, 1248.152036, 0.000000, X, Y) && !ellipse(26865.124400, 27909.991400, 3518.856101, 3518.856101, 0.000000, X, Y) && !ellipse(29175.853516, 25448.330444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27960.938660, 25537.818207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28716.804260, 25452.963470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.632000, 25688.308000, 1816.176052, 1816.176052, 0.000000, X, Y) && !ellipse(27125.841600, 25202.640000, 908.688026, 908.688026, 0.000000, X, Y) && !ellipse(29325.193604, 24301.201141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.815338, 24144.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27467.570496, 23712.273163, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 3 23:19:58 2012] Writing fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src59.gif [Fri May 4 05:05:24 2012] Mean detx,y = (2223.34, 1075.31) [Fri May 4 05:05:29 2012] Setting backscal keywords in source and bgd. spectrum [Fri May 4 05:06:18 2012] Binned source spectrum to 10 counts/bin [Fri May 4 05:06:19 2012] Setting source spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src59_src_b10.pi.gz [Fri May 4 05:06:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src59_bgd.pi.gz [Fri May 4 15:07:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 4 15:07:23 2012] rmf not generated due to insufficient counts [Wed May 9 07:39:49 2012] Updating aperture counts using extracted products [Wed May 9 07:39:49 2012] Error reading totcts from fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src59_src_b10.pi.gz [Wed May 9 07:39:59 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 9 07:39:59 2012] Using photon index=1.80, rate=0.0184, arf fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src59.arf [Wed May 9 07:39:59 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 9 07:40:00 2012] Updating source flux to 4.7e-14 [Wed May 9 08:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting