[Sat Apr 28 10:39:07 2012] Detection parameters:
  Position = (287.7, 332.6) = 17 12 34.61 -23 21 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 933.6 +/- 68.8
  Background counts = 2053.7
  Rate = 0.05 +/- 0.004

[Sat Apr 28 10:39:11 2012] Off-axis axis estimate = 2.59'
[Sat Apr 28 10:48:43 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 10:48:43 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sat Apr 28 10:48:43 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.110
[Sat Apr 28 10:48:43 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 7.73"
[Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src47.ximg exists
[Sun Apr 29 08:47:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src47.csv
[Sun Apr 29 08:47:05 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun Apr 29 08:47:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src47.csv
[Sun Apr 29 08:47:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 08:47:08 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun Apr 29 08:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sun Apr 29 08:47:08 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Apr 29 08:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Sun Apr 29 08:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:32:29 2012] Spatial fit model total counts = 27030.900000, observed total counts = 16502.000000
[Mon Apr 30 21:32:29 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 21:32:29 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:32:29 2012] Assessing source extent using major
[Mon Apr 30 21:32:29 2012] Source does appear to be extended
[Mon Apr 30 21:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:34:19 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:34:19 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Mon Apr 30 21:34:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.110
[Mon Apr 30 21:34:19 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 7.73"
[Tue May  1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src42.ximg exists
[Tue May  1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src42.csv
[Tue May  1 11:40:46 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src42_1.ximg exists
[Tue May  1 11:40:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src42.csv
[Tue May  1 11:40:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Tue May  1 11:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Tue May  1 11:40:49 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Tue May  1 11:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Tue May  1 11:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:53 2012] Spatial fit model total counts = 26742.500000, observed total counts = 16502.000000
[Thu May  3 23:17:53 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:17:53 2012] Spatial fit model total counts = 29680.800000, observed total counts = 10519.000000
[Thu May  3 23:17:53 2012] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  3 23:17:53 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:17:53 2012] Assessing source extent using major
[Thu May  3 23:17:53 2012] Source does appear to be extended
[Thu May  3 23:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:19:57 2012] XMMSAS src. selection expression = ellipse(24978.358398, 28884.482635, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  3 23:19:57 2012] Writing source region out to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src53_src.reg
[Thu May  3 23:19:57 2012] Extracting stamp from image fullrun_pn_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (250, 295) - (325, 370)
[Thu May  3 23:19:57 2012] XMMSAS bgd. selection expression = annulus(24978.358398, 28884.482635, 1087.500000, 2175.000000, X, Y) && !ellipse(29009.794000, 32408.360000, 2393.648069, 2393.648069, 0.000000, X, Y) && !ellipse(25200.350708, 31689.353821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.836000, 31908.322000, 4193.328121, 4193.328121, 0.000000, X, Y) && !ellipse(27753.638000, 31514.320000, 1410.224041, 1410.224041, 0.000000, X, Y) && !ellipse(26745.577759, 31357.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24981.422302, 31262.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.342600, 31418.880000, 1621.256047, 1621.256047, 348.679000, X, Y) && !ellipse(28437.164000, 31750.772000, 1613.872046, 820.680024, 201.764000, X, Y) && !ellipse(25710.530000, 31114.056400, 1380.912040, 1380.912040, 0.000000, X, Y) && !ellipse(28385.839200, 30872.252000, 1421.792041, 1421.792041, 0.000000, X, Y) && !ellipse(27387.812000, 30716.584000, 2820.448081, 2820.448081, 0.000000, X, Y) && !ellipse(28092.788000, 30309.800000, 8530.752245, 8530.752245, 0.000000, X, Y) && !ellipse(25573.950000, 30654.906000, 1509.304043, 1509.304043, 0.000000, X, Y) && !ellipse(26715.124573, 30134.820892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25875.266000, 30178.698000, 1327.856038, 1327.856038, 0.000000, X, Y) && !ellipse(28209.064000, 29843.054000, 4527.912130, 4527.912130, 344.057000, X, Y) && !ellipse(25112.230286, 29702.584778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23631.087677, 29234.152649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.976000, 29365.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(27577.207275, 29268.922913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.976000, 29017.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(26218.804016, 28963.196289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23202.881897, 28749.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.427094, 27837.442627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27852.790000, 27131.038000, 2246.208065, 1113.240032, 248.657000, X, Y) && !ellipse(24239.153107, 27092.834351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.040000, 26471.182000, 3744.456108, 3744.456108, 0.000000, X, Y) && !ellipse(23129.645569, 25872.588196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.496552, 25964.444244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26865.124400, 27909.991400, 3518.856101, 3518.856101, 0.000000, X, Y) && !ellipse(26684.632000, 25688.308000, 1816.176052, 1816.176052, 0.000000, X, Y)
[Thu May  3 23:19:57 2012] Writing fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src53.gif
[Fri May  4 04:29:05 2012] Mean detx,y = (-1602.83, -1650.90) 
[Fri May  4 04:29:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 04:29:59 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 04:30:00 2012] Setting source spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri May  4 04:30:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Fri May  4 14:56:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 14:56:52 2012] rmf not generated due to insufficient counts
[Wed May  9 07:39:49 2012] Updating aperture counts using extracted products
[Wed May  9 07:39:49 2012] Error reading totcts from fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Wed May  9 07:39:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:39:59 2012] Using photon index=1.80, rate=0.0517, arf fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src53.arf
[Wed May  9 07:39:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:39:59 2012] Updating source flux to 1.7e-13
[Wed May  9 08:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting