[Sat Apr 28 10:39:06 2012] Detection parameters:
  Position = (326.7, 373.9) = 17 12 22.29 -23 18 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 504.5 +/- 62.2
  Background counts = 1942.0
  Rate = 0.03 +/- 0.003

[Sat Apr 28 10:39:11 2012] Off-axis axis estimate = 5.84'
[Sat Apr 28 10:48:43 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 10:48:43 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Sat Apr 28 10:48:43 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.068
[Sat Apr 28 10:48:43 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.35"
[Sun Apr 29 08:47:04 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Apr 29 08:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src16.csv
[Sun Apr 29 08:47:04 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Apr 29 08:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src16.csv
[Sun Apr 29 08:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 08:47:07 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Apr 29 08:47:07 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Apr 29 08:47:07 2012] Fit fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Apr 30 21:32:29 2012] Warning, spatial fit 16 centroid is now closest to src. 20
[Mon Apr 30 21:32:29 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:32:29 2012] Assessing source extent using major
[Mon Apr 30 21:32:29 2012] Source does appear to be extended
[Mon Apr 30 21:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:32:29 2012] Source is confused with source 20
[Mon Apr 30 21:32:29 2012] Source is confused with source 21
[Mon Apr 30 21:32:29 2012] Source is confused with source 34
[Mon Apr 30 21:34:19 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:34:19 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Mon Apr 30 21:34:19 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.068
[Mon Apr 30 21:34:19 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.35"
[Tue May  1 11:40:45 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src13.ximg exists
[Tue May  1 11:40:45 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue May  1 11:40:45 2012] Fit fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src13 appears to have run properly
[Tue May  1 11:40:47 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue May  1 11:40:47 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue May  1 11:40:47 2012] Fit fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu May  3 23:17:53 2012] Warning, spatial fit 13 centroid is now closest to src. 21
[Thu May  3 23:17:53 2012] Spatial fit model total counts = 47330.200000, observed total counts = 47310.000000
[Thu May  3 23:17:53 2012] Offset between fit and detection position for source 18 = 7.387032 pixels
[Thu May  3 23:17:53 2012] Warning, changing simple spatial fit ID from 13 to 28
[Thu May  3 23:17:53 2012] 46203.990000 total counts/ 44070.800000 bgd. counts: snr = 10.161412
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 7.387032 pixels
  Position = (334.0, 373.1) = 17 12 19.98 -23 18 24.3
  Extent = 29.9 (28.9-30.4)", rotation angle = 0
  Source counts = 2133.2 +/- 215.0
  Background counts = 44070.8
  Rate = 0.08 +/- 0.008
[Thu May  3 23:17:53 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:17:53 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:17:53 2012] Source does appear to be extended
[Thu May  3 23:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:19:50 2012] Counts = 2133.190000, rescaling region sizes by 2.000000
[Thu May  3 23:19:50 2012] XMMSAS src. selection expression = ellipse(29009.794000, 32408.360000, 3590.472103, 3590.472103, 0.000000, X, Y)
[Thu May  3 23:19:50 2012] Writing source region out to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src18_src.reg
[Thu May  3 23:19:50 2012] Extracting stamp from image fullrun_pn_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (128, 167) - (540, 579)
[Thu May  3 23:19:50 2012] XMMSAS bgd. selection expression = annulus(29009.794000, 32408.360000, 11968.240344, 23936.480689, X, Y) && !ellipse(29313.997345, 34909.190155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29508.876495, 33878.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28717.401642, 33869.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27827.669464, 33700.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30375.756836, 33606.000885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.567719, 33528.094360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36450.258400, 33604.308060, 484.839214, 484.839214, 0.000000, X, Y) && !ellipse(27873.991760, 33109.605988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30351.577484, 33108.403259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28885.162000, 33119.356000, 948.480027, 948.480027, 0.000000, X, Y) && !ellipse(25563.593231, 32466.510101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28647.272000, 32322.296000, 1178.360034, 1178.360034, 0.000000, X, Y) && !ellipse(27675.686000, 32374.870000, 1189.264034, 823.776024, 201.428000, X, Y) && !ellipse(26395.939606, 32137.368774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.558563, 31971.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25200.350708, 31689.353821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.836000, 31908.322000, 4193.328121, 4193.328121, 0.000000, X, Y) && !ellipse(30436.355225, 31533.296509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.137115, 31540.401367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.638000, 31514.320000, 1410.224041, 1410.224041, 0.000000, X, Y) && !ellipse(31297.260000, 31806.740000, 1448.800042, 1448.800042, 0.000000, X, Y) && !ellipse(26745.577759, 31357.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24981.422302, 31262.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.342600, 31418.880000, 1621.256047, 1621.256047, 348.679000, X, Y) && !ellipse(28437.164000, 31750.772000, 1613.872046, 820.680024, 201.764000, X, Y) && !ellipse(25710.530000, 31114.056400, 1380.912040, 1380.912040, 0.000000, X, Y) && !ellipse(28385.839200, 30872.252000, 1421.792041, 1421.792041, 0.000000, X, Y) && !ellipse(30290.920685, 31092.346588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.536000, 30955.278200, 1404.640040, 1404.640040, 0.000000, X, Y) && !ellipse(27387.812000, 30716.584000, 2820.448081, 2820.448081, 0.000000, X, Y) && !ellipse(28092.788000, 30309.800000, 8530.752245, 8530.752245, 0.000000, X, Y) && !ellipse(25573.950000, 30654.906000, 1509.304043, 1509.304043, 0.000000, X, Y) && !ellipse(26715.124573, 30134.820892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25875.266000, 30178.698000, 1327.856038, 1327.856038, 0.000000, X, Y) && !ellipse(28209.064000, 29843.054000, 4527.912130, 4527.912130, 344.057000, X, Y) && !ellipse(25112.230286, 29702.584778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29925.652374, 30319.900330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23631.087677, 29234.152649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28768.401800, 29786.358000, 1286.664037, 1286.664037, 0.205000, X, Y) && !ellipse(25900.976000, 29365.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(27577.207275, 29268.922913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.976000, 29017.233000, 1258.928036, 1258.928036, 0.000000, X, Y) && !ellipse(26218.804016, 28963.196289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.358398, 28884.482635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20794.421188, 28936.205261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23202.881897, 28749.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.427094, 27837.442627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27852.790000, 27131.038000, 2246.208065, 1113.240032, 248.657000, X, Y) && !ellipse(29185.156738, 26572.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.153107, 27092.834351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35272.116730, 26444.855865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24699.040000, 26471.182000, 3744.456108, 3744.456108, 0.000000, X, Y) && !ellipse(28559.426000, 26130.420000, 1248.152036, 1248.152036, 0.000000, X, Y) && !ellipse(23129.645569, 25872.588196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24327.496552, 25964.444244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.494354, 25519.766663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26865.124400, 27909.991400, 3518.856101, 3518.856101, 0.000000, X, Y) && !ellipse(29175.853516, 25448.330444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27960.938660, 25537.818207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28716.804260, 25452.963470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.632000, 25688.308000, 1816.176052, 1816.176052, 0.000000, X, Y) && !ellipse(25795.315600, 24870.786000, 1077.784031, 1077.784031, 0.000000, X, Y) && !ellipse(25347.720764, 24931.112152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.633240, 25012.950775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24039.139130, 25023.671783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.841600, 25202.640000, 908.688026, 908.688026, 0.000000, X, Y) && !ellipse(25381.364800, 24432.837400, 380.405611, 380.405611, 0.000000, X, Y) && !ellipse(29325.193604, 24301.201141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27288.815338, 24144.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27467.570496, 23712.273163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25985.644653, 23353.594635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.991821, 23436.643951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28674.222900, 23007.535461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28053.206238, 23022.432831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26484.784851, 23345.419800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31381.211121, 21969.643356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28675.744232, 21871.155045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32114.586000, 42710.632600, 760.213622, 358.314410, 14.047057, X, Y) && !ellipse(32000.238000, 30632.088400, 1534.168044, 1534.168044, 0.000000, X, Y) && !ellipse(27384.096000, 21980.778000, 1277.368037, 1277.368037, 0.000000, X, Y) && !ellipse(27089.724000, 20983.736000, 1101.608032, 1101.608032, 0.000000, X, Y) && !ellipse(27108.572000, 19000.286000, 1522.440044, 1522.440044, 0.000000, X, Y)
[Thu May  3 23:19:50 2012] Writing fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src18.gif
[Thu May  3 23:45:49 2012] Mean detx,y = (2242.33, -4089.79) 
[Thu May  3 23:46:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May  4 00:11:15 2012] Binned source spectrum to 10 counts/bin
[Fri May  4 00:11:16 2012] Setting source spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri May  4 00:11:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May  9 07:39:46 2012] Updating aperture counts using extracted products
[Wed May  9 07:39:46 2012] Error reading totcts from fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May  9 07:39:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:39:55 2012] Using photon index=1.80, rate=0.0822, arf fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src18.arf
[Wed May  9 07:39:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:39:55 2012] Updating source flux to 2.2e-13
[Wed May  9 08:02:02 2012] Flag c found in src. 18 procflags, skipping spectral fitting