[Sat Apr 28 10:39:05 2012] Detection parameters:
  Position = (335.3, 378.0) = 17 12 19.58 -23 18 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 412.5 +/- 55.6
  Background counts = 1712.2
  Rate = 0.03 +/- 0.003

[Sat Apr 28 10:39:11 2012] Off-axis axis estimate = 6.36'
[Sat Apr 28 10:48:43 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 10:48:43 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Sat Apr 28 10:48:43 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Sat Apr 28 10:48:43 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.61"
[Sun Apr 29 08:47:04 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Apr 29 08:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src13.csv
[Sun Apr 29 08:47:04 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Apr 29 08:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src13.csv
[Sun Apr 29 08:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 08:47:07 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Apr 29 08:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Apr 29 08:47:07 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Apr 29 08:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun Apr 29 08:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:32:29 2012] Spatial fit model total counts = 9723.650000, observed total counts = 16194.000000
[Mon Apr 30 21:32:29 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 21:32:29 2012] Source 15 is offset by -6.908335 and 0.219309 pixels which is larger than
2 X fitted extent = 1.102860 x 1.102860, not incorporating fit results
[Mon Apr 30 21:32:29 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:32:29 2012] Assessing source extent using major
[Mon Apr 30 21:32:29 2012] Source does appear to be extended
[Mon Apr 30 21:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:32:29 2012] Source is confused with source 20
[Mon Apr 30 21:34:19 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:34:19 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Mon Apr 30 21:34:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Mon Apr 30 21:34:19 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.61"
[Tue May  1 11:40:45 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src11.ximg exists
[Tue May  1 11:40:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src11.csv
[Tue May  1 11:40:45 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May  1 11:40:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src11.csv
[Tue May  1 11:40:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  1 11:40:47 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May  1 11:40:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May  1 11:40:47 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May  1 11:40:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May  1 11:40:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:53 2012] Source 15 is offset by 1.506378 and -2.851863 pixels which is larger than
2 X fitted extent = 1.184294 x 1.184294, not incorporating fit results
[Thu May  3 23:17:53 2012] Source 15 is offset by 1.763635 and 4.189286 pixels which is larger than
2 X fitted extent = 1.129908 x 1.129908, not incorporating fit results
[Thu May  3 23:17:53 2012] Spatial fit model total counts = 65440.400000, observed total counts = 60440.000000
[Thu May  3 23:17:53 2012] Offset between fit and detection position for source 15 = 4.183660 pixels
[Thu May  3 23:17:53 2012] Warning, changing simple spatial fit ID from 11 to 15
[Thu May  3 23:17:53 2012] 64982.844000 total counts/ 64465.400000 bgd. counts: snr = 2.037980
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 4.183660 pixels
  Position = (332.6, 381.2) = 17 12 20.43 -23 17 48.8
  Extent = 11.9" x 11.9", rotation angle = 0
  Source counts = 517.4 +/- 254.9
  Background counts = 64465.4
  Rate = 0.02 +/- 0.01
[Thu May  3 23:17:53 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:17:53 2012] Assessing source extent using major
[Thu May  3 23:17:53 2012] Source does appear to be extended
[Thu May  3 23:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:19:50 2012] XMMSAS src. selection expression = ellipse(28885.162000, 33119.356000, 711.360020, 711.360020, 0.000000, X, Y)
[Thu May  3 23:19:50 2012] Writing source region out to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src15_src.reg
[Thu May  3 23:19:50 2012] Extracting stamp from image fullrun_pn_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (292, 340) - (373, 422)
[Thu May  3 23:19:50 2012] XMMSAS bgd. selection expression = annulus(28885.162000, 33119.356000, 1185.600034, 2371.200068, X, Y) && !ellipse(29313.997345, 34909.190155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29508.876495, 33878.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28717.401642, 33869.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27827.669464, 33700.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30375.756836, 33606.000885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.567719, 33528.094360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.991760, 33109.605988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30351.577484, 33108.403259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29009.794000, 32408.360000, 2393.648069, 2393.648069, 0.000000, X, Y) && !ellipse(28647.272000, 32322.296000, 1178.360034, 1178.360034, 0.000000, X, Y) && !ellipse(27675.686000, 32374.870000, 1189.264034, 823.776024, 201.428000, X, Y) && !ellipse(26395.939606, 32137.368774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.558563, 31971.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.836000, 31908.322000, 4193.328121, 4193.328121, 0.000000, X, Y) && !ellipse(30436.355225, 31533.296509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.137115, 31540.401367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.638000, 31514.320000, 1410.224041, 1410.224041, 0.000000, X, Y) && !ellipse(31297.260000, 31806.740000, 1448.800042, 1448.800042, 0.000000, X, Y) && !ellipse(26745.577759, 31357.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.342600, 31418.880000, 1621.256047, 1621.256047, 348.679000, X, Y) && !ellipse(28437.164000, 31750.772000, 1613.872046, 820.680024, 201.764000, X, Y) && !ellipse(25710.530000, 31114.056400, 1380.912040, 1380.912040, 0.000000, X, Y) && !ellipse(28385.839200, 30872.252000, 1421.792041, 1421.792041, 0.000000, X, Y) && !ellipse(30290.920685, 31092.346588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.536000, 30955.278200, 1404.640040, 1404.640040, 0.000000, X, Y) && !ellipse(27387.812000, 30716.584000, 2820.448081, 2820.448081, 0.000000, X, Y) && !ellipse(28092.788000, 30309.800000, 8530.752245, 8530.752245, 0.000000, X, Y) && !ellipse(25573.950000, 30654.906000, 1509.304043, 1509.304043, 0.000000, X, Y) && !ellipse(26715.124573, 30134.820892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25875.266000, 30178.698000, 1327.856038, 1327.856038, 0.000000, X, Y) && !ellipse(28209.064000, 29843.054000, 4527.912130, 4527.912130, 344.057000, X, Y) && !ellipse(29925.652374, 30319.900330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28768.401800, 29786.358000, 1286.664037, 1286.664037, 0.205000, X, Y) && !ellipse(26865.124400, 27909.991400, 3518.856101, 3518.856101, 0.000000, X, Y) && !ellipse(32000.238000, 30632.088400, 1534.168044, 1534.168044, 0.000000, X, Y)
[Thu May  3 23:19:50 2012] Writing fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src15.gif
[Thu May  3 23:42:46 2012] Mean detx,y = (2432.37, -5415.75) 
[Thu May  3 23:42:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 23:43:51 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 23:43:52 2012] Setting source spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu May  3 23:43:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May  9 07:39:45 2012] Updating aperture counts using extracted products
[Wed May  9 07:39:46 2012] Error reading totcts from fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May  9 07:39:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:39:54 2012] Using photon index=1.80, rate=0.0199, arf fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src15.arf
[Wed May  9 07:39:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:39:55 2012] Updating source flux to 6.7e-14
[Wed May  9 08:02:02 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Wed May  9 08:02:02 2012] Flag p found in src. 15 procflags, skipping spectral fitting
[Wed May  9 08:02:02 2012] Flag c found in src. 15 procflags, skipping spectral fitting