[Sat Apr 28 10:39:05 2012] Detection parameters:
  Position = (324.9, 385.9) = 17 12 22.85 -23 17 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.4 +/- 55.0
  Background counts = 1541.3
  Rate = 0.02 +/- 0.003

[Sat Apr 28 10:39:11 2012] Off-axis axis estimate = 6.63'
[Sat Apr 28 10:48:43 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 10:48:43 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Sat Apr 28 10:48:43 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.199
[Sat Apr 28 10:48:43 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.74"
[Sun Apr 29 08:47:04 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src8.ximg exists
[Sun Apr 29 08:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src8.csv
[Sun Apr 29 08:47:04 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Apr 29 08:47:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src8.csv
[Sun Apr 29 08:47:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 08:47:07 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Apr 29 08:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Apr 29 08:47:07 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Apr 29 08:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Apr 29 08:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:32:28 2012] Warning, spatial fit 8 centroid is now closest to src. 13
[Mon Apr 30 21:32:28 2012] Source 10 is offset by -4.829748 and 3.461940 pixels which is larger than
2 X fitted extent = 1.116152 x 1.116152, not incorporating fit results
[Mon Apr 30 21:32:29 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:32:29 2012] Assessing source extent using major
[Mon Apr 30 21:32:29 2012] Source does appear to be extended
[Mon Apr 30 21:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:32:29 2012] Source is confused with source 6
[Mon Apr 30 21:34:19 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 21:34:19 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Mon Apr 30 21:34:19 2012] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.199
[Mon Apr 30 21:34:19 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.74"
[Tue May  1 11:40:45 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src7.ximg exists
[Tue May  1 11:40:45 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May  1 11:40:45 2012] Fit fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_src7 appears to have run properly
[Tue May  1 11:40:47 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May  1 11:40:47 2012] fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May  1 11:40:47 2012] Fit fullrun_pn_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu May  3 23:17:53 2012] Warning, spatial fit 7 centroid is now closest to src. 15
[Thu May  3 23:17:53 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:17:53 2012] Assessing source extent using major
[Thu May  3 23:17:53 2012] Source does appear to be extended
[Thu May  3 23:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  3 23:19:49 2012] XMMSAS src. selection expression = ellipse(28219.567719, 33528.094360, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  3 23:19:49 2012] Writing source region out to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src10_src.reg
[Thu May  3 23:19:49 2012] Extracting stamp from image fullrun_pn_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (287, 348) - (362, 423)
[Thu May  3 23:19:49 2012] XMMSAS bgd. selection expression = annulus(28219.567719, 33528.094360, 1087.500000, 2175.000000, X, Y) && !ellipse(29313.997345, 34909.190155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29508.876495, 33878.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28717.401642, 33869.124908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27827.669464, 33700.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30375.756836, 33606.000885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.991760, 33109.605988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30351.577484, 33108.403259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28885.162000, 33119.356000, 948.480027, 948.480027, 0.000000, X, Y) && !ellipse(29009.794000, 32408.360000, 2393.648069, 2393.648069, 0.000000, X, Y) && !ellipse(25563.593231, 32466.510101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28647.272000, 32322.296000, 1178.360034, 1178.360034, 0.000000, X, Y) && !ellipse(27675.686000, 32374.870000, 1189.264034, 823.776024, 201.428000, X, Y) && !ellipse(26395.939606, 32137.368774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.558563, 31971.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25200.350708, 31689.353821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.836000, 31908.322000, 4193.328121, 4193.328121, 0.000000, X, Y) && !ellipse(30436.355225, 31533.296509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29226.137115, 31540.401367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27753.638000, 31514.320000, 1410.224041, 1410.224041, 0.000000, X, Y) && !ellipse(31297.260000, 31806.740000, 1448.800042, 1448.800042, 0.000000, X, Y) && !ellipse(26745.577759, 31357.706146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26462.342600, 31418.880000, 1621.256047, 1621.256047, 348.679000, X, Y) && !ellipse(28437.164000, 31750.772000, 1613.872046, 820.680024, 201.764000, X, Y) && !ellipse(25710.530000, 31114.056400, 1380.912040, 1380.912040, 0.000000, X, Y) && !ellipse(28385.839200, 30872.252000, 1421.792041, 1421.792041, 0.000000, X, Y) && !ellipse(30290.920685, 31092.346588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.536000, 30955.278200, 1404.640040, 1404.640040, 0.000000, X, Y) && !ellipse(27387.812000, 30716.584000, 2820.448081, 2820.448081, 0.000000, X, Y) && !ellipse(28092.788000, 30309.800000, 8530.752245, 8530.752245, 0.000000, X, Y) && !ellipse(25573.950000, 30654.906000, 1509.304043, 1509.304043, 0.000000, X, Y) && !ellipse(25875.266000, 30178.698000, 1327.856038, 1327.856038, 0.000000, X, Y) && !ellipse(28209.064000, 29843.054000, 4527.912130, 4527.912130, 344.057000, X, Y) && !ellipse(26865.124400, 27909.991400, 3518.856101, 3518.856101, 0.000000, X, Y)
[Thu May  3 23:19:49 2012] Writing fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src10.gif
[Thu May  3 23:32:48 2012] Mean detx,y = (1875.27, -5886.10) 
[Thu May  3 23:32:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May  3 23:33:57 2012] Binned source spectrum to 10 counts/bin
[Thu May  3 23:33:58 2012] Setting source spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May  3 23:33:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri May  4 07:22:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  4 07:22:44 2012] rmf not generated due to insufficient counts
[Wed May  9 07:39:45 2012] Updating aperture counts using extracted products
[Wed May  9 07:39:45 2012] Error reading totcts from fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May  9 07:39:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:39:54 2012] Using photon index=1.80, rate=0.0211, arf fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src10.arf
[Wed May  9 07:39:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:39:54 2012] Updating source flux to 7.2e-14
[Wed May  9 08:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  9 08:12:18 2012] xmm0505150101/analysis//spectral/fullrun_pn_xmm0505150101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete