[Sat Apr 28 10:39:17 2012] Detection parameters: Position = (357.3, 388.9) = 17 12 12.62 -23 17 15.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 155.3 +/- 34.1 Background counts = 569.1 Rate = 0.006 +/- 0.001 [Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 7.83' [Sun Apr 29 22:36:42 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting [Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 10.34" [Sun Apr 29 22:36:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087 [Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 120 for pass 0, mean size = 10.34" [Mon Apr 30 21:33:34 2012] Spatial fit model total counts = 8029.860000, observed total counts = 8035.000000 [Mon Apr 30 21:33:34 2012] Offset between fit and detection position for source 9 = 3.731750 pixels [Mon Apr 30 21:33:34 2012] Warning, changing simple spatial fit ID from 120 to 73 [Mon Apr 30 21:33:34 2012] 7780.382000 total counts/ 7404.970000 bgd. counts: snr = 4.362611 Spatial fit parameters: Offset between fit and detection position for source 9 = 3.731750 pixels Position = (359.3, 385.8) = 17 12 12.00 -23 17 29.0 Extent = 20.2 (20.2-20.2)", rotation angle = 0 Source counts = 375.4 +/- 88.2 Background counts = 7405.0 Rate = 0.01 +/- 0.002 [Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000 [Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Apr 30 21:33:35 2012] Assessing source extent using major axis lower bound [Mon Apr 30 21:33:35 2012] Source does appear to be extended [Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Apr 30 21:33:35 2012] Source is confused with source 21 [Thu May 3 00:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 3 00:21:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 20.18" [Thu May 3 00:21:29 2012] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.947 [Thu May 3 00:21:29 2012] Giving source the simple spatial ID 104 for pass 1, mean size = 20.18" [Thu May 3 23:19:08 2012] Vigneting correction estimate = 1.000000 [Thu May 3 23:19:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 3 23:19:08 2012] Assessing source extent using major axis lower bound [Thu May 3 23:19:08 2012] Source does appear to be extended [Thu May 3 23:19:08 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 03:53:01 2012] XMMSAS src. selection expression = ellipse(31208.990000, 33513.891640, 1210.812035, 1210.812035, 0.000000, X, Y) [Tue May 8 03:53:01 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src9_src.reg [Tue May 8 03:53:01 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (290, 316) - (429, 455) [Tue May 8 03:53:01 2012] XMMSAS bgd. selection expression = annulus(31208.990000, 33513.891640, 2018.020058, 4036.040116, X, Y) && !ellipse(30978.610443, 27889.167908, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(30615.375885, 28657.921021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(26532.747955, 29464.534851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.672668, 30320.779144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28875.264000, 30710.560000, 1809.176052, 1809.176052, 0.000000, X, Y) && !ellipse(29544.222000, 31793.876000, 1459.888042, 1459.888042, 0.000000, X, Y) && !ellipse(28646.286000, 30501.550000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(28770.868000, 30224.580000, 863.920025, 863.920025, 0.000000, X, Y) && !ellipse(28653.580000, 31079.552000, 984.056028, 984.056028, 0.000000, X, Y) && !ellipse(30202.527600, 29280.688000, 1370.488039, 1370.488039, 0.000000, X, Y) && !ellipse(28760.560000, 29906.352000, 876.840025, 876.840025, 0.000000, X, Y) && !ellipse(26126.184000, 32085.188000, 2077.216060, 2077.216060, 0.000000, X, Y) && !ellipse(29796.294000, 31516.926000, 1408.832041, 1408.832041, 0.000000, X, Y) && !ellipse(30341.230835, 31958.154297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24740.788000, 32260.322000, 2581.448074, 2581.448074, 0.000000, X, Y) && !ellipse(30054.328000, 30717.564000, 754.124822, 754.124822, 0.000000, X, Y) && !ellipse(26225.345114, 31131.647600, 1480.824043, 360.905610, 86.444000, X, Y) && !ellipse(28686.724000, 32179.042600, 701.068020, 701.068020, 0.000000, X, Y) && !ellipse(30422.304810, 31536.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.576000, 29767.299400, 1190.368034, 1190.368034, 0.000000, X, Y) && !ellipse(29975.175600, 29913.212000, 1018.488029, 1018.488029, 0.000000, X, Y) && !ellipse(29321.136719, 34753.170013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30582.610168, 31292.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29030.081787, 32931.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29807.778600, 32672.716000, 2304.784066, 1315.864038, 89.967000, X, Y) && !ellipse(29549.900800, 32253.656600, 2045.200059, 738.294421, 81.791000, X, Y) && !ellipse(29913.618400, 30361.900180, 2835.360082, 1033.360030, 90.000000, X, Y) && !ellipse(27676.558472, 31610.212708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.612000, 33707.482000, 1546.088044, 423.044012, 77.748200, X, Y) && !ellipse(30263.353516, 33176.828674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30676.749542, 29790.978668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.242432, 31887.939392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26745.522003, 30656.398743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27757.263397, 33005.058899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29554.802000, 32838.576000, 1436.328041, 1436.328041, 0.000000, X, Y) && !ellipse(31453.516000, 32136.570000, 2592.448075, 2592.448075, 0.000000, X, Y) && !ellipse(30064.166000, 28791.714000, 1391.336040, 936.896027, 96.232060, X, Y) && !ellipse(26231.922000, 31589.702000, 1441.912041, 1441.912041, 0.000000, X, Y) && !ellipse(29725.924000, 32038.155200, 1026.312030, 1026.312030, 0.000000, X, Y) && !ellipse(28259.940000, 33831.282000, 1591.160046, 1591.160046, 0.000000, X, Y) && !ellipse(29659.040000, 30251.452000, 571.058416, 571.058416, 0.000000, X, Y) && !ellipse(28513.406000, 32612.570000, 922.712027, 922.712027, 0.000000, X, Y) && !ellipse(30429.470734, 33465.034760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.255580, 33427.234076, 1300.144037, 1300.144037, 0.000000, X, Y) && !ellipse(28542.450200, 33123.142000, 1845.424053, 1845.424053, 0.000000, X, Y) && !ellipse(29972.406000, 33507.837200, 1614.976046, 475.250414, 88.519000, X, Y) && !ellipse(26768.768000, 33578.054800, 1535.312044, 1535.312044, 0.000000, X, Y) && !ellipse(27441.423767, 34567.392303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31078.454000, 32419.116000, 1462.128042, 1462.128042, 0.000000, X, Y) && !ellipse(28124.788483, 34718.113007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28783.806580, 33434.377136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31703.868866, 30243.860291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.082000, 31944.978000, 1488.136043, 1488.136043, 0.000000, X, Y) && !ellipse(31141.910000, 31421.904000, 1296.224037, 1296.224037, 0.000000, X, Y) && !ellipse(31114.940000, 30081.762000, 1479.376043, 1031.616030, 90.000000, X, Y) && !ellipse(28457.123400, 34877.972000, 947.712027, 947.712027, 0.000000, X, Y) && !ellipse(30989.657600, 30910.680000, 1488.824043, 1488.824043, 0.000000, X, Y) [Tue May 8 03:53:01 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src9.gif [Tue May 8 14:10:22 2012] Mean detx,y = (-4570.08, 5384.03) [Tue May 8 14:10:28 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 8 14:12:05 2012] Binned source spectrum to 10 counts/bin [Tue May 8 14:12:05 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Tue May 8 14:12:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src9_bgd.pi.gz [Wed May 9 07:40:31 2012] Updating aperture counts using extracted products [Wed May 9 07:40:31 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Wed May 9 07:40:42 2012] Calculating source flux in energy range 0.30-8.00 [Wed May 9 07:40:42 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src9.arf [Wed May 9 07:40:42 2012] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 9 07:40:42 2012] Updating source flux to 1.4e-13 [Wed May 9 07:51:20 2012] Flag c found in src. 9 procflags, skipping spectral fitting