[Sat Apr 28 10:39:20 2012] Detection parameters:
  Position = (290.9, 333.0) = 17 12 33.60 -23 21 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 757.3 +/- 71.9
  Background counts = 1391.0
  Rate = 0.02 +/- 0.002

[Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 2.57'
[Sun Apr 29 22:36:42 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Sun Apr 29 22:36:42 2012] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.629
[Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.71"
[Mon Apr 30 21:31:45 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Apr 30 21:31:45 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Apr 30 21:31:45 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src21 appears to have run properly
[Mon Apr 30 21:31:50 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Apr 30 21:31:50 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Apr 30 21:31:50 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Apr 30 21:33:34 2012] Source 88 is offset by -7.837694 and 0.312239 pixels which is larger than
2 X fitted extent = 0.911439 x 0.911439, not incorporating fit results
[Mon Apr 30 21:33:34 2012] Spatial fit model total counts = 15546.600000, observed total counts = 15597.000000
[Mon Apr 30 21:33:34 2012] Offset between fit and detection position for source 88 = 2.839828 pixels
[Mon Apr 30 21:33:34 2012] Warning, changing simple spatial fit ID from 21 to 19
[Mon Apr 30 21:33:34 2012] 15617.629000 total counts/ 15349.700000 bgd. counts: snr = 2.162568
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 2.839828 pixels
  Position = (293.2, 334.6) = 17 12 32.86 -23 21 11.7
  Extent = 7.5 (5.4-15.4)", rotation angle = 0
  Source counts = 267.9 +/- 125.0
  Background counts = 15349.7
  Rate = 0.008 +/- 0.004
[Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:35 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 21:33:35 2012] Source does appear to be extended
[Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:33:35 2012] Source is confused with source 84
[Mon Apr 30 21:33:35 2012] Source is confused with source 92
[Mon Apr 30 21:33:35 2012] Source is confused with source 87
[Thu May  3 00:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu May  3 00:21:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Thu May  3 00:21:29 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.45"
[Thu May  3 23:17:09 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src20.ximg exists
[Thu May  3 23:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src20.csv
[Thu May  3 23:17:09 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May  3 23:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src20.csv
[Thu May  3 23:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:11 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May  3 23:17:11 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May  3 23:17:11 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May  3 23:19:07 2012] Spatial fit model total counts = 15258.400000, observed total counts = 15329.000000
[Thu May  3 23:19:07 2012] Offset between fit and detection position for source 88 = 0.180955 pixels
[Thu May  3 23:19:07 2012] Warning, changing simple spatial fit ID from 20 to 8
[Thu May  3 23:19:07 2012] 15097.715000 total counts/ 14879.600000 bgd. counts: snr = 1.788092
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.180955 pixels
  Position = (293.1, 334.7) = 17 12 32.90 -23 21 11.1
  Extent = 7.3 (5.2-14.8)", rotation angle = 0
  Source counts = 218.1 +/- 122.9
  Background counts = 14879.6
  Rate = 0.006 +/- 0.003
[Thu May  3 23:19:07 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:19:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:19:07 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:19:07 2012] Source does appear to be extended
[Thu May  3 23:19:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 03:52:41 2012] XMMSAS src. selection expression = ellipse(25450.936000, 29073.086000, 436.822213, 436.822213, 0.000000, X, Y)
[Tue May  8 03:52:41 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src88_src.reg
[Tue May  8 03:52:41 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (268, 310) - (318, 360)
[Tue May  8 03:52:41 2012] XMMSAS bgd. selection expression = annulus(25450.936000, 29073.086000, 728.037021, 1456.074042, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(25030.396973, 29613.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(26532.747955, 29464.534851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24980.118683, 31023.663635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.708000, 27565.464000, 1858.448053, 1858.448053, 0.000000, X, Y) && !ellipse(24995.884247, 29428.606995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25034.998138, 29019.875854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.184000, 32085.188000, 2077.216060, 2077.216060, 0.000000, X, Y) && !ellipse(26246.166748, 30132.383575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25383.526000, 26690.848000, 1100.056032, 1100.056032, 0.000000, X, Y) && !ellipse(24740.788000, 32260.322000, 2581.448074, 2581.448074, 0.000000, X, Y) && !ellipse(26225.345114, 31131.647600, 1480.824043, 360.905610, 86.444000, X, Y) && !ellipse(25402.434000, 30209.676800, 1298.200037, 1298.200037, 0.000000, X, Y) && !ellipse(25215.044000, 26897.320000, 2256.976065, 2256.976065, 0.000000, X, Y) && !ellipse(26244.079895, 30482.106689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26745.522003, 30656.398743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26231.922000, 31589.702000, 1441.912041, 1441.912041, 0.000000, X, Y) && !ellipse(25412.390000, 30369.282000, 649.485619, 649.485619, 0.000000, X, Y) && !ellipse(25887.161652, 30746.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.324000, 28350.592000, 1176.680034, 1176.680034, 0.000000, X, Y) && !ellipse(24498.528229, 26836.932007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23996.542000, 29401.962200, 2021.920058, 2021.920058, -0.000000, X, Y) && !ellipse(24463.558000, 27684.638000, 1143.824033, 1143.824033, 0.000000, X, Y)
[Tue May  8 03:52:41 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src88.gif
[Tue May  8 06:45:31 2012] Mean detx,y = (1403.96, 1553.67) 
[Tue May  8 06:45:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 06:45:57 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 06:45:57 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Tue May  8 06:45:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Wed May  9 07:40:24 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:24 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Wed May  9 07:40:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:33 2012] Using photon index=1.80, rate=0.00613, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src88.arf
[Wed May  9 07:40:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:33 2012] Updating source flux to 6.8e-14
[Wed May  9 07:51:20 2012] Flag b found in src. 88 procflags, skipping spectral fitting
[Wed May  9 07:51:20 2012] Flag c found in src. 88 procflags, skipping spectral fitting