[Sat Apr 28 10:39:20 2012] Detection parameters:
  Position = (353.2, 343.0) = 17 12 13.92 -23 20 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 445.2 +/- 42.3
  Background counts = 831.0
  Rate = 0.02 +/- 0.002

[Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 5.12'
[Sun Apr 29 22:36:42 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Sun Apr 29 22:36:42 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.759
[Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 8.99"
[Mon Apr 30 21:31:48 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src58.ximg exists
[Mon Apr 30 21:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src58.csv
[Mon Apr 30 21:31:48 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src58_1.ximg exists
[Mon Apr 30 21:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src58.csv
[Mon Apr 30 21:31:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:31:52 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Mon Apr 30 21:31:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Mon Apr 30 21:31:52 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Mon Apr 30 21:31:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Mon Apr 30 21:31:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:33:34 2012] Warning, spatial fit 58 centroid is now closest to src. 78
[Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:35 2012] Assessing source extent using major
[Mon Apr 30 21:33:35 2012] Source does appear to be extended
[Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:33:35 2012] Source is confused with source 81
[Mon Apr 30 21:33:35 2012] Source is confused with source 77
[Mon Apr 30 21:33:35 2012] Source is confused with source 61
[Thu May  3 00:21:29 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Thu May  3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Thu May  3 00:21:29 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.759
[Thu May  3 00:21:29 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 8.99"
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src52.ximg exists
[Thu May  3 23:17:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src52.csv
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src52_1.ximg exists
[Thu May  3 23:17:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src52.csv
[Thu May  3 23:17:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  3 23:17:12 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Thu May  3 23:17:12 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Thu May  3 23:17:12 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Thu May  3 23:19:07 2012] Source 75 is offset by 4.764305 and -4.298590 pixels which is larger than
2 X fitted extent = 4.159389 x 4.159389, not incorporating fit results
[Thu May  3 23:19:07 2012] Warning, spatial fit 52 centroid is now closest to src. 85
[Thu May  3 23:19:08 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:19:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:19:08 2012] Assessing source extent using major
[Thu May  3 23:19:08 2012] Source does appear to be extended
[Thu May  3 23:19:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 03:52:45 2012] XMMSAS src. selection expression = ellipse(30676.749542, 29790.978668, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 03:52:45 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src75_src.reg
[Tue May  8 03:52:45 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (316, 305) - (391, 380)
[Tue May  8 03:52:45 2012] XMMSAS bgd. selection expression = annulus(30676.749542, 29790.978668, 1087.500000, 2175.000000, X, Y) && !ellipse(30978.610443, 27889.167908, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(30615.375885, 28657.921021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.736000, 27912.240000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(29315.672668, 30320.779144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28875.264000, 30710.560000, 1809.176052, 1809.176052, 0.000000, X, Y) && !ellipse(29544.222000, 31793.876000, 1459.888042, 1459.888042, 0.000000, X, Y) && !ellipse(28646.286000, 30501.550000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(28770.868000, 30224.580000, 863.920025, 863.920025, 0.000000, X, Y) && !ellipse(28653.580000, 31079.552000, 984.056028, 984.056028, 0.000000, X, Y) && !ellipse(30202.527600, 29280.688000, 1370.488039, 1370.488039, 0.000000, X, Y) && !ellipse(28760.560000, 29906.352000, 876.840025, 876.840025, 0.000000, X, Y) && !ellipse(29796.294000, 31516.926000, 1408.832041, 1408.832041, 0.000000, X, Y) && !ellipse(30341.230835, 31958.154297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30054.328000, 30717.564000, 754.124822, 754.124822, 0.000000, X, Y) && !ellipse(28686.724000, 32179.042600, 701.068020, 701.068020, 0.000000, X, Y) && !ellipse(30422.304810, 31536.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.576000, 29767.299400, 1190.368034, 1190.368034, 0.000000, X, Y) && !ellipse(29975.175600, 29913.212000, 1018.488029, 1018.488029, 0.000000, X, Y) && !ellipse(30582.610168, 31292.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29807.778600, 32672.716000, 2304.784066, 1315.864038, 89.967000, X, Y) && !ellipse(29549.900800, 32253.656600, 2045.200059, 738.294421, 81.791000, X, Y) && !ellipse(29913.618400, 30361.900180, 2835.360082, 1033.360030, 90.000000, X, Y) && !ellipse(27676.558472, 31610.212708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.242432, 31887.939392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29554.802000, 32838.576000, 1436.328041, 1436.328041, 0.000000, X, Y) && !ellipse(31453.516000, 32136.570000, 2592.448075, 2592.448075, 0.000000, X, Y) && !ellipse(30064.166000, 28791.714000, 1391.336040, 936.896027, 96.232060, X, Y) && !ellipse(29725.924000, 32038.155200, 1026.312030, 1026.312030, 0.000000, X, Y) && !ellipse(29659.040000, 30251.452000, 571.058416, 571.058416, 0.000000, X, Y) && !ellipse(28513.406000, 32612.570000, 922.712027, 922.712027, 0.000000, X, Y) && !ellipse(29617.475608, 27431.144000, 1300.144037, 1300.144037, 0.000000, X, Y) && !ellipse(30233.806000, 28376.692000, 709.098420, 709.098420, 0.000000, X, Y) && !ellipse(28542.450200, 33123.142000, 1845.424053, 1845.424053, 0.000000, X, Y) && !ellipse(29972.406000, 33507.837200, 1614.976046, 475.250414, 88.519000, X, Y) && !ellipse(28961.340424, 26931.777618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31078.454000, 32419.116000, 1462.128042, 1462.128042, 0.000000, X, Y) && !ellipse(30152.545868, 27975.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31703.868866, 30243.860291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30475.749600, 27024.964000, 1335.152038, 1335.152038, 0.000000, X, Y) && !ellipse(29572.899872, 26931.443085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.082000, 31944.978000, 1488.136043, 1488.136043, 0.000000, X, Y) && !ellipse(31141.910000, 31421.904000, 1296.224037, 1296.224037, 0.000000, X, Y) && !ellipse(31114.940000, 30081.762000, 1479.376043, 1031.616030, 90.000000, X, Y) && !ellipse(30989.657600, 30910.680000, 1488.824043, 1488.824043, 0.000000, X, Y) && !ellipse(31208.990000, 33513.891640, 1614.416046, 1614.416046, 0.000000, X, Y)
[Tue May  8 03:52:45 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src75.gif
[Tue May  8 09:26:56 2012] Mean detx,y = (-3802.30, 1873.66) 
[Tue May  8 09:26:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 09:27:28 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 09:27:29 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue May  8 09:27:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Tue May  8 23:44:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 23:44:45 2012] rmf not generated due to insufficient counts
[Wed May  9 07:40:26 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:27 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed May  9 07:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:36 2012] Using photon index=1.80, rate=0.0164, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src75.arf
[Wed May  9 07:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:36 2012] Updating source flux to 2.1e-13
[Wed May  9 07:51:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting