[Sat Apr 28 10:39:19 2012] Detection parameters:
  Position = (348.4, 352.9) = 17 12 15.41 -23 19 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 391.1 +/- 49.1
  Background counts = 1041.9
  Rate = 0.01 +/- 0.002

[Sat Apr 28 10:39:22 2012] Off-axis axis estimate = 5.36'
[Sun Apr 29 22:36:42 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 22:36:42 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Sun Apr 29 22:36:42 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.929
[Sun Apr 29 22:36:42 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 9.11"
[Mon Apr 30 21:31:48 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src71.ximg exists
[Mon Apr 30 21:31:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src71.csv
[Mon Apr 30 21:31:49 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src71_1.ximg exists
[Mon Apr 30 21:31:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src71.csv
[Mon Apr 30 21:31:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 21:31:52 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Mon Apr 30 21:31:52 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Mon Apr 30 21:31:52 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Mon Apr 30 21:33:34 2012] Spatial fit model total counts = 13434.600000, observed total counts = 13471.000000
[Mon Apr 30 21:33:34 2012] Offset between fit and detection position for source 61 = 6.201074 pixels
[Mon Apr 30 21:33:34 2012] 13291.010000 total counts/ 12213.800000 bgd. counts: snr = 9.747090
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 6.201074 pixels
  Position = (343.8, 348.8) = 17 12 16.89 -23 20 9.8
  Extent = 17.7 (16.7-18.2)", rotation angle = 0
  Source counts = 1077.2 +/- 115.3
  Background counts = 12213.8
  Rate = 0.03 +/- 0.003
[Mon Apr 30 21:33:35 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 21:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 21:33:35 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 21:33:35 2012] Source does appear to be extended
[Mon Apr 30 21:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 21:33:35 2012] Source is confused with source 68
[Thu May  3 00:21:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  3 00:21:29 2012] Initial guess for spatial extent in simple fitting = 17.72"
[Thu May  3 00:21:29 2012] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.968
[Thu May  3 00:21:29 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 17.72"
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src64.ximg exists
[Thu May  3 23:17:10 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src64_1.ximg exists
[Thu May  3 23:17:10 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_src64 appears to have run properly
[Thu May  3 23:17:13 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Thu May  3 23:17:13 2012] fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Thu May  3 23:17:13 2012] Fit fullrun_mos2_xmm0505150101_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Thu May  3 23:19:07 2012] Spatial fit model total counts = 19027.200000, observed total counts = 19024.000000
[Thu May  3 23:19:07 2012] Offset between fit and detection position for source 61 = 2.365862 pixels
[Thu May  3 23:19:07 2012] Warning, changing simple spatial fit ID from 64 to 24
[Thu May  3 23:19:07 2012] 18657.369000 total counts/ 18411.800000 bgd. counts: snr = 1.809778
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 2.365862 pixels
  Position = (341.5, 348.3) = 17 12 17.62 -23 20 12.2
  Extent = 7.1 (5.2-11.7)", rotation angle = 0
  Source counts = 245.6 +/- 136.6
  Background counts = 18411.8
  Rate = 0.007 +/- 0.004
[Thu May  3 23:19:08 2012] Vigneting correction estimate = 1.000000
[Thu May  3 23:19:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  3 23:19:08 2012] Assessing source extent using major axis lower bound
[Thu May  3 23:19:08 2012] Source does appear to be extended
[Thu May  3 23:19:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 03:52:49 2012] XMMSAS src. selection expression = ellipse(29659.040000, 30251.452000, 428.293812, 428.293812, 0.000000, X, Y)
[Tue May  8 03:52:49 2012] Writing source region out to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src61_src.reg
[Tue May  8 03:52:49 2012] Extracting stamp from image fullrun_mos2_xmm0505150101_pi300-10000_cl_sm2.00.img.gz, (317, 324) - (366, 373)
[Tue May  8 03:52:49 2012] XMMSAS bgd. selection expression = annulus(29659.040000, 30251.452000, 713.823021, 1427.646041, X, Y) && !ellipse(30978.610443, 27889.167908, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26826.077000, 27804.724600, 4501.608130, 4501.608130, 0.000000, X, Y) && !ellipse(30615.375885, 28657.921021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.736000, 27912.240000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(28448.614000, 29669.340000, 2021.744058, 2021.744058, 0.000000, X, Y) && !ellipse(29315.672668, 30320.779144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28875.264000, 30710.560000, 1809.176052, 1809.176052, 0.000000, X, Y) && !ellipse(29544.222000, 31793.876000, 1459.888042, 1459.888042, 0.000000, X, Y) && !ellipse(28646.286000, 30501.550000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(28770.868000, 30224.580000, 863.920025, 863.920025, 0.000000, X, Y) && !ellipse(28653.580000, 31079.552000, 984.056028, 984.056028, 0.000000, X, Y) && !ellipse(30202.527600, 29280.688000, 1370.488039, 1370.488039, 0.000000, X, Y) && !ellipse(28760.560000, 29906.352000, 876.840025, 876.840025, 0.000000, X, Y) && !ellipse(29796.294000, 31516.926000, 1408.832041, 1408.832041, 0.000000, X, Y) && !ellipse(30341.230835, 31958.154297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30054.328000, 30717.564000, 754.124822, 754.124822, 0.000000, X, Y) && !ellipse(28686.724000, 32179.042600, 701.068020, 701.068020, 0.000000, X, Y) && !ellipse(30422.304810, 31536.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.576000, 29767.299400, 1190.368034, 1190.368034, 0.000000, X, Y) && !ellipse(29975.175600, 29913.212000, 1018.488029, 1018.488029, 0.000000, X, Y) && !ellipse(30582.610168, 31292.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29807.778600, 32672.716000, 2304.784066, 1315.864038, 89.967000, X, Y) && !ellipse(29549.900800, 32253.656600, 2045.200059, 738.294421, 81.791000, X, Y) && !ellipse(29913.618400, 30361.900180, 2835.360082, 1033.360030, 90.000000, X, Y) && !ellipse(27676.558472, 31610.212708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30676.749542, 29790.978668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.242432, 31887.939392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29554.802000, 32838.576000, 1436.328041, 1436.328041, 0.000000, X, Y) && !ellipse(31453.516000, 32136.570000, 2592.448075, 2592.448075, 0.000000, X, Y) && !ellipse(30064.166000, 28791.714000, 1391.336040, 936.896027, 96.232060, X, Y) && !ellipse(29725.924000, 32038.155200, 1026.312030, 1026.312030, 0.000000, X, Y) && !ellipse(30233.806000, 28376.692000, 709.098420, 709.098420, 0.000000, X, Y) && !ellipse(28542.450200, 33123.142000, 1845.424053, 1845.424053, 0.000000, X, Y) && !ellipse(31078.454000, 32419.116000, 1462.128042, 1462.128042, 0.000000, X, Y) && !ellipse(30152.545868, 27975.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31703.868866, 30243.860291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.082000, 31944.978000, 1488.136043, 1488.136043, 0.000000, X, Y) && !ellipse(31141.910000, 31421.904000, 1296.224037, 1296.224037, 0.000000, X, Y) && !ellipse(31114.940000, 30081.762000, 1479.376043, 1031.616030, 90.000000, X, Y) && !ellipse(30989.657600, 30910.680000, 1488.824043, 1488.824043, 0.000000, X, Y)
[Tue May  8 03:52:49 2012] Writing fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src61.gif
[Tue May  8 11:28:55 2012] Mean detx,y = (-2868.27, 2412.01) 
[Tue May  8 11:28:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 11:29:26 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 11:29:27 2012] Setting source spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue May  8 11:29:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Wed May  9 07:40:28 2012] Updating aperture counts using extracted products
[Wed May  9 07:40:28 2012] Error reading totcts from fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Wed May  9 07:40:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed May  9 07:40:37 2012] Using photon index=1.80, rate=0.0069, arf fullrun_mos2_xmm0505150101_pi300-10000_pass1_cl_src61.arf
[Wed May  9 07:40:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  9 07:40:37 2012] Updating source flux to 9e-14
[Wed May  9 07:51:20 2012] Flag c found in src. 61 procflags, skipping spectral fitting